Breakdown of oil films and formation of residual films

The breakdown processes of oil films under quasi-static loading have been investigated by using a newly developed steel-oil-mercury system. The relationship between the thickness and breakdown ratio of a hexadecane film is represented by a single master curve independently of the indentation speed, indentation load, and temperature. The master curve shows that the breakdown process of hexadecane includes two stages; one is the decrement of the thickness without breakdown and the other is the decrement of the thickness with a drastic progress of breakdown. By solving a small amount of fatty acid in hexadecane, the thickness increases and the breakdown ratio decreases noticeably; a multilayer residual film supporting normal load is formed between two metal surfaces. Experiments at different temperatures reveal a negative relationship between the temperature and thickness of residual film, which indicates that the residual film is organized by physical interaction rather than chemical interaction. At least under a lower concentration, the residual film appears to consist of not only fatty acid molecules but also hexadecane molecules.     

Oxyphilic cell variant of endometrioid adenocarcinoma

A case of oxyphilic cell variant of endometrioid adenocarcinoma is presented. To the best of our knowledge, there have been only three such cases reported in the English literature. The patient was a 35-year-old Japanese female (gravida 0, para 0). She was slightly obese with profuse vaginal bleeding. Histological examination of the resected uterus revealed endometrioid adenocarcinoma with an exclusive oxyphilic cell component. There was no evidence of myometrial invasion nor lymph node metastases. Reported cases of oxyphilic cell variant of endometrioid adenocarcinoma, including the present case, were stages 0-1 and grades 1-2. Although further study is necessary to evaluate this variant, oxyphilic cell variant seems to be an early stage of adenocarcinoma and should be differentiated from eosinophilic metaplasia and other types of adenocarcinoma of the endometrium.     

A model for the complex permittivity of water at frequencies below 1 THz

Experimental permittivity data of liquid water, compiled from the open literature, were selectively applied to support a modeling strategy. Frequencies up to 1 THz and atmospheric temperatures are covered with an expression made up by two relaxation (Debye) terms. The double-Debye model reduces to one term when the high frequency limit is set at 100 GHz, and the model can be extended to 30 THz by adding two resonance (Lorentzian) terms. The scheme was carried out by employing nonlinear least-squares fitting routines to data we considered reliable.     

Substrate effect on the temperature coefficient of resistance of La0.7Ca0.3MnO3 thin films prepared by metal organic deposition

Epitaxial La_0.7Ca_0.3MnO₃ (LCMO) thin films were successfully prepared by the metal-organic deposition process on various (001) single-crystal substrates: MgO, LaAlO₃ (LAO), SrTiO₃ (STO), and (LaAlO₃)_0.3-(SrAlTaO₆)_0.7 (LSAT). The crystallinity and the epitaxial growth of the LCMO films were characterized by X-ray diffraction (θ − 2θ scans and pole-figure analysis). The temperature dependence of the resistance of the LCMO/LSAT, LCMO/STO and LCMO/LAO films exhibit typical characteristics with a transition from the paramagnetic-insulator state to the ferromagnetic-metallic state at a temperature peak (T _p ) ranging from 258 to 270 K. However, the LCMO/MgO films exhibited a semiconducting behavior without any transition. Based on the R(T) measurement, we calculated the temperature coefficient of resistance (TCR) for a bolometric application and we obtained 22%/K, 10.2%/K and 27.5%/K for the film grown on the LSAT, STO and LAO substrates, respectively. This difference in the TCR properties is related to the strain induced by the lattice mismatch between LCMO and the different substrates.     

Analysis of license inconsistency in large collections of open source projects

Free and open source software (FOSS) plays an important role in source code reuse practice. They usually come with one or more software licenses written in the header part of source files, stating the requirements and conditions which should be followed when been reused. Removing or modifying the license statement by re-distributors will result in the inconsistency of license with its ancestor, and may potentially cause license infringement. In this paper, we describe and categorize different types of license inconsistencies and propose a method to detect them. Then we applied this method to Debian 7.5 and a collection of 10,514 Java projects on GitHub and present the license inconsistency cases found in these systems. With a manual analysis, we summarized various reasons behind these license inconsistency cases, some of which imply potential license infringement and require attention from the developers. This analysis also exposes the difficulty to discover license infringements, highlighting the usefulness of finding and maintaining source code provenance.     

Clinical studies on renal trauma

A total of 18 kidneys in 17 patients with renal trauma were treated at the Department of Urology, Mitoyo General Hospital between April 1991 and August 1997. Patients were between 10 and 88 years old (median; 52). Eleven of them were male and 6 were female. The main cause of injury was a traffic accident in 11 cases (64.7%), which was similar in tendency to previous reports in this country. According to the Classification of Renal Injury by the Japanese Association for the Surgery of Trauma in Japan, there were 8 cases (47.1%) of Type I (sub-capsular injury) and Type II (superficial injury) that was classified a minor injury, and there were 9 cases (52.9%) of Type III (deep injury), Type IV (pedicle injury) and open injury that was classified as a major injury. Surgical treatment was performed in 8 cases (47.1%), which were all classified as a major injury. Posttraumatic plasma lactate dehydrogenase (LDH) was elevated immediately in case of major injury in comparison with a case of minor injury. Serum LDH may be useful as a parameter of the degree of renal trauma.     

Immunohistochemical quantitation for extracellular matrix proteins in rats with glomerulonephritis induced by monoclonal anti-Thy-1.1 antibody

During clot retraction, platelets interact with fibrin resulting in marked reduction of clot volume. Altered fibrin structure has been reported to affect clot retraction as measured by serum expression. This study was performed to test whether such altered retraction was the result of increased resistance to network collapse or due to decreased force development by platelets. Altered fibrin structure was documented as variation of fibre mass/length ratios (mu) and shifts in clot elastic modulus. The force developed by platelets during clotting was measured directly. Increasing the fibrinogen concentration led to thinner fibre formation (decreased mu), and a linear increase in gel elastic modulus. Over a fibrinogen concentration range of 100 to 400 mg/dl, force development was minimally affected. Force development and clot elastic modulus increased in a linear fashion with increasing platelet concentration. Increasing the calcium concentration from 5 to 20 mM caused a 160% increase in fibrin fibre size (mu), and a 52% decline in clot modulus. Force developed at 1200 s declined by 17%. At 15 mg/ml, dextran and hydroxyethyl starch (HES) also increased mu, and decreased clot modulus; however, both agents markedly reduced force development. Increasing ionic strength or the addition of IgG decreased mu and increased gel elastic modulus. Force development increased modestly with increased ionic strength, did not change with addition of IgG in saline and declined with addition of IgG in maltose. This study indicates that force development is primarily dependent on platelet function while clot modulus depends on both fibrin structure and platelet function.(ABSTRACT TRUNCATED AT 250 WORDS)     

Epitaxial growth of titanium oxide thin films on MgO(100) single-crystal substrates by reactive deposition methods

We synthesized titanium oxide thin films on MgO(100) single-crystal substrates by two reactive deposition methods and compared the structures of the thin films formed by these methods. In one method (pulsed-molecular-beam deposition method), molecular oxygen is supplied to the substrates by using a pulsed-molecular-oxygen beam source and deposition of one unit layer of titanium and subsequent supply of molecular oxygen are repeatedly performed. In the other method (radical beam deposition method), atomic oxygen is irradiated to the substrates by using an atomic oxygen beam generated by the radical beam source and irradiation of the atomic oxygen and deposition of titanium are simultaneously performed. In the case of the pulsed-molecular-beam deposition method, the crystal structure was changed by increasing the number of oxygen pulses supplied from the beam source. We found that the crystal structure of titanium oxide depended on the composition ratio of O:Ti in the film. The maximum ratio of O:Ti attainable by this method was 1.85, and at this ratio, (100)-oriented pseudorutile was formed. In the case of the radical beam deposition method, (100)-oriented anatase was formed below the titanium deposition rate of 0.10 nm/s and pseudorutile (TiO_2−δ) was formed above 0.15 nm/s. The pseudorutile structure synthesized on this experiment was very stable in air. We concluded that the crystal structure of the pseudorutile is a new crystal structure of titanium oxide.     

Spatial correlation coefficients of rainfall intensity inferred from statistics of rainfall intensity and rain attenuation

On the basis of the reliable statistics of rainfall rate and rainfall attenuation for 8 localities in Europe, the spatial correlation coefficient of point rainfall intensity was inferred for each locality from the cumulative distributions of attenuation and rainfall intensity by inversely applying the modified Morita and Higuti rainfall attenuation prediction method. It was found that for European regions the spatial correlation coefficient with an exponential dependence on the horizontal distance is more appropriate for the prediction of rainfall attenuation than that proposed by Morita and Higuti for the Japanese climate. It was also found that although the spatial correlation characteristic varies significantly from one locality to another its variance is not so significant within a particular ccir rainfall climatic zone. This suggests that in predicting the rainfall attenuation it is desirable to employ the spatial correlation coefficient appropriate for the locality to be estimated.