Characterization of resol resins modified by the addition of PVC plastisols

Plastisols, which are a blend of poly(vinyl chloride) resin and a plasticizer (DEHP), were used as a toughening agent of a resol resin in order to improve the mechanical properties. It was not possible to formulate resol blends by adding more than 10 % of plastisol owing to a lack of apparent homogeneity in the systems, which also showed many air bubbles. The relationship between dynamic mechanical, mechanical and thermal properties and the amount of plastisol added was studied. It was determined from the infrared spectroscopy and dynamic mechanical results that the resol–plastisol blends seem to be formed by a reaction between the phenol and PVC giving a higher crosslinked structure. An improvement in the thermal resistance of the blends at lower temperatures was observed with an increase in the percentage of plastisol. Flexural analysis showed the elastic behaviour of the systems. However, it was not possible to observe the effect of the plasticizer (DEHP) owing to the low quantity of plastisol that was added to the resol. Copyright © 2004 Society of Chemical Industry     

The Evolving Role of Fetuin-A in Nonalcoholic Fatty Liver Disease: An Overview from Liver to the Heart

Nonalcoholic fatty liver disease (NAFLD) is strongly associated to the features of metabolic syndrome which can progress to cirrhosis, liver failure and hepatocellular carcinoma. However, the most common cause of mortality in people with NAFLD is not liver-related but stems from atherosclerotic cardiovascular disease (CVD). The prevalence of NAFLD is on the rise, mainly as a consequence of its close association with two major worldwide epidemics, obesity and type 2 diabetes (T2D). The exact pathogenesis of NAFLD and especially the mechanisms leading to disease progression and CVD have not been completely elucidated. Human fetuin-A (alpha-2-Heremans Schmid glycoprotein), a glycoprotein produced by the liver and abundantly secreted into the circulation appears to play a role in insulin resistance, metabolic syndrome and inflammation. This review discusses the links between NAFLD and CVD by specifically focusing on fetuin-A’s function in the pathogenesis of NAFLD and atherosclerotic CVD.     

Ultimate behavior of axially loaded RC wall-like columns confined with GFRP

The assessment of the effectiveness of the fiber reinforced polymer (FRP) confinement on rectangular reinforced concrete (RC) columns with high aspect ratio (wall-like) still represents an unresolved issue. The present paper aims at providing more experimental evidence about the behavior of such members confined with both uni-directional and quadri-directional glass FRP laminates. Particular attention is devoted to issues related to the premature failure of confining fibers experimentally observed in wall-like columns. Test results on nine axially loaded columns are herein presented; emphasis is also given to the analysis of FRP strain profiles along the sides of the cross-section. The analysis of test results highlights that glass FRP (GFRP) confinement could determine significant strength and ductility increases; the discussion of failure modes points out that the failure of GFRP confined wall-like columns is controlled by the shape of the cross-section and occurs at transverse strains in the jacket much lower than those ultimate of the fibers. Theoretical–experimental comparisons are performed using some available models for strength prediction of such members.     

The magnitude of a product recall: offshore outsourcing vs. captive offshoring effects

The escalation in product recalls in recent years is attributed to the rise of globalisation and associated challenges of offshoring. Extant SCM research suggests that product recalls have a significant negative impact on financial performance, but gaps exist relative to the managerial actions to minimise their impact. Recall response strategies have become more important in the press, given that a single recall may result in the mandatory withdrawal of millions of products from the market, with firms incurring enormous logistics costs and brand damage. In this study, we address this gap in the research, and using a measure of product recall defined as the volume of products withdrawn from the market due to product quality failure. We explore the scale of the recall in the context of pharmaceutical sector global sourcing strategies, exploring whether the variation in global sourcing decisions not only increases the likelihood of a recall, but also influences the capability to minimise the total cost of recall. Our results suggest that offshore outsourcing and captive offshoring have opposite effects in terms of their influence on the magnitude of product recall. We summarise the implications through a compelling set of insights for future global sourcing strategy research themes.     

Tribological Behavior of Aluminum Alloy AlSi10Mg-TiB<Subscript>2</Subscript> Composites Produced by Direct Metal Laser Sintering (DMLS)

Direct metal laser sintering (DMLS) is an additive manufacturing technique for the production of parts with complex geometry and it is especially appropriate for structural applications in aircraft and automotive industries. Aluminum-based metal matrix composites (MMCs) are promising materials for these applications because they are lightweight, ductile, and have a good strength-to-weight ratio This paper presents an investigation of microstructure, hardness, and tribological properties of AlSi10Mg alloy and AlSi10Mg alloy/TiB₂ composites prepared by DMLS. MMCs were realized with two different compositions: 10% wt. of microsize TiB₂, 1% wt. of nanosize TiB₂. Wear tests were performed using a pin-on-disk apparatus on the prepared samples. Performances of AlSi10Mg samples manufactured by DMLS were also compared with the results obtained on AlSi10Mg alloy samples made by casting. It was found that the composites displayed a lower coefficient of friction (COF), but in the case of microsize TiB₂ reinforcement the wear rate was higher than with nanosize reinforcements and aluminum alloy without reinforcement. AlSi10Mg obtained by DMLS showed a higher COF than AlSi10Mg obtained by casting, but the wear rate was higher in the latter case.     

Thermal Effects on the Gas Transmission Properties of Ionomers Used in Food Packaging Applications

Polyethylene-based ionomers, due to the presence of ionic aggregates, display a time-dependent crystalline morphology if submitted to thermal treatments. As a consequence gas permeability, which is strongly affected by physical morphology, is also found to be time dependent in previously thermally treated ionomer samples. The effect of sample exposure at 65°C and of successive ageing at 35°C on gas transmission properties of three different ethylene– acrylic acid ionomers (characterized by a different amount of acrylic acid groups, percentage of neutralization and type of counterions) has been investigated. In particular the changes in oxygen and carbon dioxide permeabilities due to thermal treatments at 65°C and subsequent ageing at 35°C have been monitored. X-Ray diffraction analysis and differential scanning calorimetry have been used to elucidate these changes in transport properties.     

Development and characterization of bionanocomposites based on poly(3‐hydroxybutyrate) and cellulose nanocrystals for packaging applications

Poly(3‐hydroxybutyrate) (PHB)‐based bionanocomposites were prepared using various percentages of cellulose nanocrystals (CNCs) by a solution casting method. CNCs were prepared from microcrystalline cellulose using sulfuric acid hydrolysis. The influence of CNCs on PHB properties was evaluated using differential scanning calorimetry, Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetry and tensile testing. Vapor permeation and light transmission of the materials were also measured. Differential scanning calorimetric tests demonstrated that CNCs were effective PHB nucleation agents. Tensile strength and Young's modulus of PHB increased with increasing CNC concentration. Moreover, the PHB/CNC bionanocomposites exhibited reduced water vapor permeation compared to neat PHB and had better UV barrier properties than commodity polymers such as polypropylene. It was found that nanocomposites with 6 wt% of CNCs had the optimum balance among thermal, mechanical and barrier properties. © 2016 Society of Chemical Industry     

Multiscale approach for the design of composite sandwich structures for train application

In the present work a multiscale approach is considered for the design of composite sandwich structures for a roof of railway vehicle. The procedure consists in different steps that start from cost/benefit analysis on materials and their manufacturing process and cycle up to analysis of sub-components and entire structures. Each step is characterized by experimental, theoretical and numerical studies. The design activities herein presented count experimental campaigns able to characterize both the properties of novel sandwich material, manufactured expressly for transportation industry, the sandwich and joint behaviors. Analytical and numerical approaches have been used to validate and optimize the structural layout. Finite element analysis has been also performed on a test article to verify the “new” sandwich roof in regard to structural requirements suggested by European Code.