Dual role of dendritic cells in the induction and down-regulation of antigen-specific cutaneous inflammation

We have previously reported that contact sensitivity (CS) to dinitrofluorobenzene (DNFB) in C57BL/6 mice was mediated by MHC class I-restricted CD8+ T cells and down-regulated by MHC class II-restricted CD4+ T cells. In this study, we analyzed the contribution of dendritic cells (DC) in the induction of these two T cell subsets endowed with opposite functions. Hapten-pulsed skin- and bone marrow-derived DC, obtained from either normal C57BL/6 mice or from MHC class II (I+ II-) and MHC class I (I- II+)-deficient mice, were tested for their ability to prime normal mice for CS to dinitrofluorobenzene. Expression of MHC class I molecules by transferred DC was mandatory both for the induction of CS and for the generation of hapten-specific CD8+ T cells in lymphoid organs. I+ II- DC were as potent as I+ II+ DC in priming for CS, demonstrating that activation of effector CD8+ T cells can occur independently of CD4+ T cell help. I- II+ DC could not immunize for CS, although they could sensitize for a delayed-type hypersensitivity reaction to protein Ags. Moreover, I- II+ DC injected simultaneously with cutaneous sensitization down-regulated the inflammatory response, suggesting that hapten presentation by MHC class II molecules could prime regulatory CD4+ T cells. These results indicate that DC can present haptenated peptides by both MHC class I and class II molecules and activate Ag-specific CD8+ effector and CD4+ regulatory T cell subsets, concurrently and independently.     

A new type of gas sensor based on the thermovoltaic effect in zinc oxide inhomogeneously doped with mixed-valence impurities

We propose a new type of potentiometric gas sensor operating on the basis of the thermovoltaic effect in uniformly heated (without temperature gradients) ZnO/ZnO–Fe sandwich structures obtained by the sol–gel method. It is established that a significant contribution to the gas responsivity of sensors is related to the thickness of the upper doped layer of the structure.     

Making urban real estate markets work for the poor: Theory, policy and practice

This paper explores the relationship between theory, policy and practice, linking urban real estate markets and poverty alleviation. The paper argues that the contribution of urban real estate markets to poverty alleviation has not been optimised due, in part, to inadequate or inappropriate policy. The article attributes this to conceptual and methodological problems arising from the traditional neoclassical analysis of urban real estate markets, ambivalence to the idea that freer markets in real estate are a good thing for the urban poor and insufficient regard to lessons of experience from years of implementing urban anti-poverty land projects. Based on new analytical perspectives provided by institutional economics, this paper proposes specific policy interventions more likely to facilitate pro-poor outcomes in urban real estate markets.     

Direct electron microscopic observation of transcrystalline layers in microfibrillar reinforced polymer-polymer composites

Microfibrillar reinforced composites (MFC) comprising an isotropic matrix from a lower melting polymer, i.e., low density polyethylene (LDPE), reinforced by microfibrils of a higher melting polymer, recycled from bottles, i.e., poly(ethylene terephthalate) (PET), were processed under industrially relevant conditions via injection molding in a weight ratio of PET/LDPE = 50/50. Dog bone samples with MFC structure were characterized by means of scanning (SEM) and transmission (TEM) electron microscopy. SEM observations on cryogenic fracture surfaces show an isotropic LDPE matrix reinforced by more or less randomly distributed PET microfibrils. By means of TEM on stained ultrathin slices one observes the formation of transcrystalline layers of LDPE matrix on the surface of the PET microfibrils. In these layers the crystalline lamellae are aligned parallel to each other and are placed perpendicularly to the fibril surfaces. This is in contrast to the bulk matrix where the lamellae are quasi-randomly arranged.     

Über den Einfluß des Gefüges von Zinklegierungen auf die Schutzfähigkeit von Zinkanoden in Seewasser

Influence of the structure of zinc alloys on the protective capacity of zinc anodes in sea water The use of zinc for cathodic protection duties in sea water is restricted because of the considerable polarisation of zinc. The behaviour is due in particular to cathodically active additions of lead, copper and iron. The microcouples then formed give rise to considerable zinc dissolution and to the formation of a thick and dense passivation layer. Since, however, any reduction of the iron content in zinc involves high cost it is more economical to add small quantities of Al, Cd, Si, Hg, Sn or Mn. These additions produce a considerable grain refinement and thus reduce the tendency to form microcouples even in the presence of iron.     

Distributed control parallelism in multidisciplinary aircraft design

Multidisciplinary design optimization (MDO) for large-scale engineering problems poses many challenges (e.g. the design of an efficient concurrent paradigm for global optimization based on disciplinary analyses, expensive computations over vast data sets, etc.). This work focuses on the application of distributed schemes for massively parallel architectures to MDO problems, as a tool for reducing computation time and solving larger problems. The specific problem considered here is configuration optimization of a high speed civil transport (HSCT), and the efficient parallelization of the embedded paradigm for reasonable design space identification. Two distributed dynamic load balancing techniques (random polling and global round robin with message combining) and two necessary termination detection schemes (global task count and token passing) were implemented and evaluated in terms of effectiveness and scalability to large problem sizes and a thousand processors. The effect of certain parameters on execution time was also inspected. Empirical results demonstrated stable performance and effectiveness for all schemes, and the parametric study showed that the selected algorithmic parameters have a negligible effect on performance. Copyright © 1999 John Wiley & Sons, Ltd.     

Thermal stability of electroless NiMeP amorphous alloys

The thermal stability and the preservation of paramagnetic state of amorphous electroless NiP alloys are important for many industrial applications. The addition of third component (Me = Cu, Sn, or Sb) to NiP alloy should reduce the magnetic moment of precipitated ferromagnetic phase. The influence of Me on the thermal stability of ternary alloys is studied. Using differential scanning calorimetry, analysis of the crystallization kinetics is carried out. The remanence after annealing at different temperatures is presented.     

Recycling of poly(ethylene terephthalate) as polymer‐polymer composites

Microfibrillar reinforced composites (MFC) comprising an isotropic matrix from a lower melting polymer reinforced by microfibrils of a higher melting polymer were manufactured under industrially relevant conditions and processed via injection molding. Low density polyethylene (LDPE) (matrix) and recycled poly(ethylene terephthalate) (PET) (reinforcing material) from bottles were melt blended (in 30/70 and 50/50 PET/LDPE wt ratio) and extruded, followed by continuous drawing, pelletizing and injection molding of dogbone samples. Samples of each stage of MFC manufacturing and processing were characterized by means of scanning electron microscopy (SEM), wide‐angle X‐ray scattering (WAXS), dynamic mechanical thermal analysis (DMTA), and mechanical testing. SEM and WAXS showed that the extruded blend is isotropic but becomes highly oriented after drawing, being converted into a polymer‐polymer composite upon injection molding at temperatures below the melting temperature of PET. This MFC is characterized by an isotropic LDPE matrix reinforced by randomly distributed PET microfibrils, as concluded from the WAXS patterns and SEM observations. The MFC dogbone samples show impressive mechanical properties—the elastic modulus is about 10 times higher than that of LDPE and about three times higher than reinforced LDPE with glass spheres, approaching the modulus of LDPE reinforced with 30 wt% short‐glass fibers (GF). The tensile strength is at least two times higher than that of LDPE or of reinforced LDPE with glass spheres, approaching that of reinforced LDPE with 30 wt% GF. The impact strength of LDPE increases by 50% after reinforcement with PET. It is concluded that: (i) the MFC approach can be applied in industrially relevant conditions using various blend partners, and (ii) the MFC concept represents an attractive alternative for recycling of PET as well as other polymers.     

TH—110B大气采样器流量的期间核查

文章介绍了大气采样器流量的期间核查方法,用En值进行评价,对并TH-110B大气采样器的流量进行了核查验证,结果令人满意。     

Effect of Sample Configuration on the Morphology of Foamed LDPE/PP Blends Injection Molded by a Gas Counterpressure Process

Blends of isotactic poly(propylene) and low‐density polyethylene with different composition ratios were prepared through direct melt compounding on a twin‐screw extruder. The specimens with various geometric configurations were injection‐molded using a gas counterpressure process, using blends to which 0.5 wt.‐% of a blowing agent was added. The influence of blend composition and specimen geometry on the structure and morphology of the samples was investigated by SEM and WAXS. The thermal behavior of the blends was analyzed by DSC. It was found that the morphology of each region depended on the composition ratio and specimen geometry.