Effects of feed composition,protein denaturation and storage of milk serum protein/lactose powders on lactosylation

During whey powder production, the feed is subjected to several heat treatments which can cause lactosylation of proteins. In this study, lactosylation of whey proteins was evaluated in spray-dried powders before and after storage by varying the native protein fraction as well as the serum protein/lactose ratio in the powders. The lactosylation of native α-lactalbumin and β-lactoglobulin in the powders before storage was not affected to a large extent by the protein denaturation or if the feed had been heat treated in a high or low lactose environment. After storage (relative humidity of 23.5%, 30 °C, 25 days), the kinetic of lactosylation tended to increase with increasing native protein fraction and bulk protein content in the powders. An explanation could be that proteins dissolved in the lactose glassy structure might have a lower reactivity, while proteins present in the protein glassy structure with dissolved lactose may display higher lactosylation reactivity.     

Manganese ferrite-polyaniline hybrid materials: Electrical and magnetic properties

Magnetic MnFe₂O₄ nanopowders were synthesized by an original solvothermal method in the absence and in the presence of tetra-n-butylammonium bromide (TBAB) and Tween 80 (TW) as surfactants. Manganese ferrite/polyaniline (PANI) hybrid materials were synthesized by in situ polymerization of aniline on the surface of MnFe₂O₄ using ammonium persulfate as oxidant. The purpose of the study was to investigate the influence of the two surfactants on the properties of the MnFe₂O₄ powders and of their composites with PANI. The specific surface area, the cumulative surface area of pores and the cumulative volume of pores are influenced by the nature of surfactant in case of MnFe₂O₄ powders and are higher by comparison to those of the MnFe₂O₄/PANI hybrid materials. The values of saturation magnetization in case of MnFe₂O₄ powders are higher than those of the hybrid materials and are not influenced by the surfactant nature. These features revealed that MnFe₂O₄ powders can be efficiently used as adsorbents for the purification of wastewaters. The values of the electrical conductivity of the composites exhibit a significant increase in comparison to the MnFe₂O₄ powders and depend on the surfactant nature. The highest value of electrical conductivity was achieved by the composite obtained using Tween 80 as surfactant (σ_DC = 54.5·10^?5S?m^?1) which was close to that of PANI (σ_DC = 61.2·10^?5 S?m^?1). The fact that the magnetic and electric properties of the synthesized MnFe₂O₄/PANI composites can be changed by design, demonstrate the high potential of these materials to be used in magneto-electric applications.     

Chitosan Microspheres as Carriers for pH‐Indicating Species in Corrosion Sensing

Chitosan microspheres containing bromocresol green, cresol red, and phenolphthalein for corrosion detection, through pH change, are synthesized in order to be used in protective coatings for aluminium alloys. Microspheres containing corrosion detection species are characterized morphologically (SEM) and physico‐chemically (FTIR, TGA). Release studies (UV–vis) are performed in corrosion‐promoting conditions (pH, NaCl), and detection studies by immersion in media associated with corrosion activity while microspheres' sensing activity is evaluated visually. Electrochemical characterization of AA2024 substrates in the presence of chitosan spheres is performed to understand material performance, and a color change is observed as a result of local pH increase in cathodic areas when corrosion takes place. These findings can be correlated with the results from release studies and seem a promising approach for corrosion sensing purposes, not only because pH increase is possible to detect due to corrosion, but also because chitosan is considered an environmentally friendly material.     

Using magnetic coupling to eliminate right half-plane zeros in boost converters

A dynamic analysis of the boost converter with an output filter reveals that magnetic coupling between inductors allows transfer of the zeros to the left half-plane of the control-to-output transfer function. Similar results requiring smaller magnetic components are obtained by combining magnetic coupling with damping of the output filter. The analysis is based on the application of the Routh-Hurtwitz's criterion to the numerator of the transfer function in order to derive the design conditions for the converter parameters. A design example illustrates the procedure, and experimental results verify the theoretical predictions. The application of these techniques will allow the design of high efficiency voltage boost-based regulators with dynamic behavior similar to buck-derived structures.     

Uncertainty Matters: Computer Models at the Science–Policy Interface

The use of computer models offers a general and flexible framework that can help to deal with some of the complexities and difficulties associated with the development of water management plans as prescribed by the Water Framework Directive. However, despite the advantages modelling presents, the integration of information derived from models into policy is far away from being trivial or the norm. Part of the difficulties of this integration is rooted in the lack of confidence policy makers have on the incorporation of modelling information into policy formulation. In this paper we examine the reasons for this apparent lack of confidence and explore how some tools, presently in use, address this problem. We conclude that public confidence in models is highly dependent on the way uncertainties are addressed and suggest possible directions of action to improve the current situation. Four real case studies illustrate how computer models have been used in The Netherlands for carrying out management plans at regional and national scale. We suggest that the solution to integrate modelling information into policy formulation lies on both the modelling and the policy-making communities.     

Understanding source effects in ADHD rating scales: Reply to DuPaul (2003).

G. J. DuPaul (see record 2003-02033-012) offered two suggestions for additional research to understand the strong source effects reported by R. Gomez, G. L Burns, J. A. Walsh, and M. A. de Moura (see record 2003-02033-001) in attention-deficit/ hyperactivity disorder (ADHD) rating scales. The first suggestion was to determine whether the source effects represent mostly bias or accuracy. The second suggestion was to minimize source effects through the development of better ADHD rating scales. Because source effects can represent bias or accuracy, it is important to minimize the bias aspect through content validation procedures prior to attempts to determine whether source effects better reflect bias or accuracy. This comment offers various suggestions to reduce the bias in ADHD rating scales. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

EXPERIMENTAL STUDY ON MIXING: POWER CONSUMPTION AND DEGREE OF SUSPENSION

An experimental study on mixing, degree of suspension and power consumption in solid-liquid suspensions was done. A system similar to those found in anaerobic fermentation processes of animal manures was used, and an existing mixing equipment was adapted for the study. Power consumption and degree of suspension for both mechanical mixing and mixing by gas was determined. The influence of variables such as geometry, solids concentration, stirrer velocity, and gas velocity was studied, discussed, and compared to data from the literature. Best results were obtained for gas mixing, the power consumption being about one fourth of that required by mechanical agitation. Finally, extended correlations relating Power and Reynolds numbers for mechanical mixing and mixing by gas are proposed.     

Off-line optimization and control for real time integration of a three-phase hydrogenation catalytic reactor

In order to develop and test the integration procedure, in this paper a real time process integration involving the optimization and control of the process is presented, in this case, with the two-layer approach. The used optimization algorithms were Levenberg–Marquardt and SQP that solve a non-linear least square problem subject to bounds on the variables. The two-layer approach is a hierarchical control structure where an optimization layer calculates the set points and manipulated variables to the advanced controller, which is based on the dynamic matrix control with constraints (QDMC). The non-isothermal dynamic model of the three-phase slurry catalytic reactor with appropriate solution procedure was utilized in this work (Vasco de Toledo, E. C., Santana, P. L., Maciel, M. R. W., & Maciel Filho, R. (2001). Dynamic modeling of a three-phase catalytic slurry reactor. Chemical Engineering Science, 56, 6055–6061). The model consists on mass and heat balance equations for the catalyst particles as well as for the bulk phases of gas and liquid. The model was used to describe the dynamic behavior of hydrogenation reaction of o-cresol to obtain 2-methil-cyclohexanol, in the presence of a catalyst Ni/SiO₂.     

Single-channel EEG measurement of engagement in virtual rehabilitation: a validation study

Virtual Reality - Stroke rehabilitation suffers from low levels of patient engagement, impeding recovery. Virtual rehabilitation (VR) approaches can improve patient outcomes; however, there is...