Iodine from brown algae in human nutrition,with an emphasis on bioaccessibility,bioavailability, chemistry,and effects of processing: A systematic review

Brown algae are becoming increasingly popular as a food source and dietary supplement in Europe and other Western countries. As they are highly rich in iodine, they represent a potential new dietary iodine source. Iodine deficiency has been re-emerging in Europe, and it is important to ensure adequate intake through one's diet. However, macroalgae, and especially brown algae, may contain very high amounts of iodine, and both iodine deficiency and excessive iodine may increase the risk of negative health effects. The iodine content of algae or foods containing algae is currently not regulated in the European Union. The aim of this paper is to review the literature to determine the chemical species of iodine in brown algae, the loss of iodine during processing, and the bioavailability and bioaccessibility of iodine. A systematic search of the literature was performed in April 2021, via the databases Web of Science and PubMed. The review includes studies of iodine in brown macroalgae in relation to bioavailability, bioaccessibility, processing and speciation. A meta-analysis was conducted in relation to the following topics: (i) the correlation between total iodine and iodide (I^–) content in brown algae; (ii) the correlation between the loss of iodine during processing and the I^– content; and (iii) the correlation between bioavailability and the I^– content. The bioavailability of iodine from brown algae was generally high, with in vivo bioavailability ranging from 31% to 90%. The in vitro bioavailability of iodine (2%–28%) was systematically lower than in vivo bioavailability (31%–90%), indicating an inadequate in vitro methodology. Processing may reduce the iodine content of brown algae, and a higher I^– content was positively correlated with increased iodine loss during processing. Although processing strategies may reduce the iodine content of brown algae significantly, the iodine content may still be high after processing. These findings may be used in food safety evaluations of brown algae as well as in the development of macroalgae-containing foods with iodine contents suitable for human consumption. Further research on processing techniques to reduce the iodine content in brown macroalgae are warranted.     

Application of piece‐wise linear weight functions for 2D 8‐node quadrilateral element in contact problems

The present study is a continuation of our previous work with the aim to reduce problems caused by standard higher order elements in contact problems. The difficulties can be attributed to the inherent property of the Galerkin method which gives uneven distributions of nodal forces resulting in oscillating contact pressures. The proposed remedy is use of piece‐wise linear weight functions. The methods to establish stiffness and/or mass matrix for 8‐node quadrilateral element in 2D are presented, i.e. the condensing and direct procedures. The energy and nodal displacement error norms are also checked to establish the convergence ratio. Interpretation of calculated contact pressures is discussed. Two new 2D 8‐node quadrilateral elements, QUAD8C and QUAD8D, are derived and tested in many examples, which show their good performance in contact problems. Copyright © 2004 John Wiley & Sons, Ltd.     

Determination of instantaneous corrosion rates and runoff rates of copper from naturally patinated copper during continuous rain events

Instantaneous corrosion rates of naturally patinated copper of varying age (16 months, 138 and 145 years) have been determined during continuous rain events in the laboratory with electrochemical impedance spectroscopy using a two-electrode cell. The two-electrode cell was found to yield the same information in bulk rainwater as a conventional three-electrode cell.Relatively constant corrosion rates, between 0.2 and 0.6 μm/y, were determined for samples having a two-layer structure with an inner brownish layer of cuprous oxide and an outer greenish layer of basic copper salts (138, 145 years). Samples with cuprous oxide as the dominating phase of the patina (16 months) showed higher and somewhat increasing corrosion rates during a rain event (from 0.6 to 1.2 μm/y). During a continuous rain event, corrosion rates were found to be approximately 10 (brownish patina) and 25 times (greenish patina) lower than corresponding instantaneous runoff rates. The first flush phenomena of the runoff process, with an increased concentration during first flush and a relatively constant concentration during steady state, was indirectly seen as an increase in solution conductivity during the first rain volume followed by relative constant value. The contribution of the concentration in the first flush to the total annual runoff rate was significant for panels having a greenish layer (138, 145 years) whereas it was negligible for panels having a brownish layer (16 months).     

Simulation of Temperature Distribution in Stored Wheat without Aeration

A neural-deterministic simulation model applied for calculating distributions of temperatures and moisture content in a bed of wheat stored in a steel silo without aeration is presented in the article. The model consists of differential equations of heat and moisture transfer, initial and boundary conditions, and three artificial neural networks used during simulated ambient air conditions. Experiments and computer simulations were carried out in order to determine temperature fields in wheat grain stored in a steel silo for two months. The computer simulations were carried using MATLAB and FEMLAB software. The difference between measured and simulated temperature in grain near the silo wall at a height of 2.5 m from the bottom was less than 3.0°C. On the basis of the analysis performed it was concluded that the temperature distributions obtained with the model were consistent with the measured results obtained for grain stored in a steel silo without aeration.     

Microprocessor debugging techniques and their application in debugger design

Every microprocessor-based system needs powerful debugging tools. Debugging power strongly depends on a mechanism of control exchange between the debugger and an application program. Several implementation methods of such a mechanism are briefly described and compared in this paper. It is shown that conditional breakpoints facilitate a semantics-oriented approach to program debugging. Some debugging techniques derived from elementary control-exchange mechanisms are proposed. Most of the techniques discussed are implemented in the MD-86 debugger designed for the Intel 8086 microprocessor. The debugger itself is also briefly described.     

The influence of biomass co-combustion on boiler fouling and efficiency

The paper presents an attempt to evaluate the influence of biomass co-combustion on the fouling of boiler convection surfaces. In order to show the influence of co-firing biomass with bituminous coal on boiler efficiency, the calculations of pulverized fuel (PF) OP 140 steam generator have been carried out. Typical Upper Silesian coal with medium fouling inclination has been chosen as a basic fuel. Three kinds of biomass have been taken into consideration: straw, wood and dried sewage sludge. The results confirm that the properties of additional fuels cause deterioration of the boiler efficiency as well as the changes in boilers operational parameters (amount of water injected in attemperators, ash stream, hot air temperature). The biomass during cofiring in fact replaces the coal, but always the additional fuel consumption is higher than that of the substituted coal. Therefore, the actual decrease of coal consumption is smaller than the thermal fraction of the biomass.     

Student acceptance of unique meals

Students (N = 167) from the 4th, 8th, and 11th grades sorted meals, listed on individual cards, according to whether they would or would not eat them. Students were told to either consider eating the meals at home or at school. Forty-two different meals were selected from a pool of unique meals created by students in a previous study. The meals differed in head component, the presence or absence of vegetables, and the number of different foodstuffs. On average, approximately half of the meals were deemed acceptable, but older students accepted more meals than younger ones, boys accepted more meals than girls, and meals to be consumed at home were accepted more than those to be consumed at school. In addition, students tended to accept meals comprised of a small number of foodstuffs that did not contain vegetables. The also chose more meat-based meals over those containing fish or soup. These results suggest that students have rather unique food preferences that do not correspond well with nutritional standards. In order to address this problem we recommended that students be given more good choices in the school cafeteria through the introduction of a two-meal system and salad bars.