Boosting the activity of FeOOH via integration of ZIF-12 and graphene to efficiently catalyze the oxygen evolution reaction

Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm^?2 and a low Tafel slope value of 78 mV dec^?1. The catalyst offers a maximum current density of 101 mA cm^?2, while it gives a turnover frequency (TOF) value of 0.031 s^?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support.     

Complex formation of montmorillonite clay with polymers. Part 2: The use of montmorillonite clay–vinyl monomer complex as a comonomer in the copolymerization reaction of styrene–acrylonitrile monomers

The bulk copolymerization of styrene–acrylonitrile monomers using styrene‐N⁺–montmorillonite complex as a comonomer in the polymerization was studied. The X‐ray diffraction (XRD) analysis showed that part of the styrene‐N⁺–montmorillonite complex remained non‐dispersed (immiscible) and the copolymer was excluded from the interlayer of the immiscible part of the clay. The successive chemical extraction process revealed that a reasonable amount of the styrene–acrylonitrile copolymer was directly attached to the styrene‐N⁺–montmorillonite complex and enveloped the clay. Highly exfoliated clay lamella and nanospheres (3–5 nm) were observed by transmission electron microscopy (TEM). The montmorillonite clay assume two different morphologies, immiscible and exfoliated, on the basis of the XRD and TEM data. A simple method of calculation of the ratio of the exfoliated/immiscible amounts of the clay indicated that the amount of the styrene‐N⁺–montmorillonite complex exfoliated into separate lamella was 40 % (w/w) of the amount of the clay samples containing 2 % of the (styrene‐N⁺–montmorillonite complex) clay. This amount of exfoliated clay decreases with the increase of the concentration of the clay. The presence of the styrene‐N⁺–montmorillonite clay in the copolymerization reaction had a minor effect on both the copolymer composition and the molecular weight. Modification of the clay with the derivatized styrene monomer can achieve a nanocomposite using a percentage no more than 4 % (w/w) of complex in the copolymer. Copyright © 2004 Society of Chemical Industry     

Radiation characteristics of an infinite dielectric-coated axiallyslotted cylindrical antenna partly embedded in a ground plane

The radiation characteristics of an axial slot on a dielectric-coated conducting circular cylinder embedded in a semi-circle in an infinite ground plane (GP) are examined. The boundary-value method is employed to obtain the solution with the aid of the partial orthogonality of the trigonometric functions. The resulting dual infinite series involved in the solution is then truncated to generate numerical results. The geometry considered here is important because it can be implemented on the body of any mobile communication system. Moreover the GP adds a new parameter to the slotted dielectric-coated conducting circular cylindrical antenna and can be used in beam shaping and to enhance the antenna performance     

Planning prompts and indexed terms in textbook search tasks.

Text search is a type of strategic reading that involves locating specific goal-relevant information. Previous research has indicated that college and high school students often exhibit inefficient or unsuccessful text-search performance. Consequently, the effects of 2 manipulations on text-search performance were investigated: (1) the presence of indexed terms in a text-search task and (2) the use of a planning prompt before beginning a task. 34 college students engaged in 6 text-search tasks. Half of these tasks contained terms that could be used in an index; half required that a search term be generated. Half of the subjects were randomly assigned to a prompt condition in which they were prompted to plan their search before beginning each task. The results indicated that a planning prompt raised the success level of search performance, as did the presence of terms that were searchable in the textbook's index. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

OXIDIZABLE COUPLING AGENTS: INTRODUCTION OF SURFACE FUNCTIONALITY

The synthesis and grafting to glass or quartz of alkylalkoxysilane coupling agents (RSi(OR') 3 ) that are susceptible/responsive to oxidation is described. Hydrosilylation of the inexpensive polyolefin squalene occurred efficiently once or twice with the silane HMe 2 SiOSiMe 2 (CH 2 ) 2 Si(OEt) 3 to give a silane coupling agent 3 that possesses several alkene groups. Once grafted to a silica surface Q-Sq using traditional means, the coupling agent was oxidized and further processed in several different ways. First, epoxidation using soluble peracids led to polyepoxides that could be further hydrolyzed to give polyalcohol surfaces Q-Sq-PAA-H 2 O . Alternatively, ozonolysis with gaseous O 3 led to the ozonides Q-Sq-O 3 , which could be decomposed to give either aldehyde/ketone Q-Sq-O 3 -redu , or ketone/carboxylic acid groups Q-Sq-O 3 -H 2 O 2 , respectively, bound to the surface. The aldehyde/ketone groups were characterized by condensation with dinitrophenylhydrazine to give the highly colored hydrazones Q-Sq-O 3 -redu-DNPH . These studies demonstrate the ready portability of organic chemistry to silica (or related) surfaces using judiciously chosen silane coupling agents and the possibility of controlling surface functionalization by postgrafting oxidation.     

Interpretation of way-finding healthcare symbols by a multicultural population: Navigation signage design for global health

The interpretation of way-finding symbols for healthcare facilities in a multicultural community was assessed in a cross-sectional study. One hundred participants recruited from Al Ain city in the United Arab Emirates were asked to interpret 28 healthcare symbols developed at Hablamos Juntos (such as vaccinations and laboratory) as well as 18 general-purpose symbols (such as elevators and restrooms). The mean age was 27.6 years (16–55 years) of whom 84 (84%) were females. Healthcare symbols were more difficult to comprehend than general-purpose signs. Symbols referring to abstract concepts were the most misinterpreted including oncology, diabetes education, outpatient clinic, interpretive services, pharmacy, internal medicine, registration, social services, obstetrics and gynecology, pediatrics and infectious diseases. Interpretation rates varied across cultural backgrounds and increased with higher education and younger age. Signage within healthcare facilities should be tested among older persons, those with limited literacy and across a wide range of cultures.     

Biochemical and physiological studies of certain ticks (Ixodoidea): Isolation and partial identification of a new fatty acid in eggs ofDermacentor andersoni Stiles (Ixodidae)

Gas liquid chromatographic analysis of the fatty acid methyl esters from eggs ofDermacentor andersoni Stiles (Ixodidae) revealed the presence of significant quantities (15% total fatty acids) of an unidentified component with a retention time between C_18∶3−C_22∶0 fatty acids. Smaller amounts of the unidentified component (ca. 5% total fatty acid) also were detected in host rabbit serum. Purified, the unidentified component's methyl ester collected from the tick eggs by preparative gas liquid chromatography was partially identified and characterized by chemical and spectroscopic analyses. The evidence suggests that the unidentified component is a methyl branched C₁₅ tricarboxylic acid containing two vicinal carboxylic acid groups. Biosynthesis of the unidentified component by the tick is under investigation.     

Recognizing arabic handwritten characters using deep learning and genetic algorithms

Automated techniques for Arabic content recognition are at a beginning period contrasted with their partners for the Latin and Chinese contents recognition. There is a bulk of handwritten Arabic archives available in libraries, data centers, historical centers, and workplaces. Digitization of these documents facilitates (1) to preserve and transfer the country’s history electronically, (2) to save the physical storage space, (3) to proper handling of the documents, and (4) to enhance the retrieval of information through the Internet and other mediums. Arabic handwritten character recognition (AHCR) systems face several challenges including the unlimited variations in human handwriting and the leakage of large and public databases. In the current study, the segmentation and recognition phases are addressed. The text segmentation challenges and a set of solutions for each challenge are presented. The convolutional neural network (CNN), deep learning approach, is used in the recognition phase. The usage of CNN leads to significant improvements across different machine learning classification algorithms. It facilitates the automatic feature extraction of images. 14 different native CNN architectures are proposed after a set of try-and-error trials. They are trained and tested on the HMBD database that contains 54,115 of the handwritten Arabic characters. Experiments are performed on the native CNN architectures and the best-reported testing accuracy is 91.96%. A transfer learning (TF) and genetic algorithm (GA) approach named “HMB-AHCR-DLGA” is suggested to optimize the training parameters and hyperparameters in the recognition phase. The pre-trained CNN models (VGG16, VGG19, and MobileNetV2) are used in the later approach. Five optimization experiments are performed and the best combinations are reported. The highest reported testing accuracy is 92.88%.

     

Bubble hydrodynamic influence on oxygen transfer rate at presence of cationic and anionic surfactants in electroflotation proces

In this work, the effects of the presence of surfactants in the liquid phase and the hydrodynamic regime of the bubble flow on the oxygen transfer rate were investigated in an electroflotation process in batch mode. The volumetric mass transfer coefficient KLα and the oxygenation capacity were evaluated to improve the performances of the electroflotation process in terms of oxygenation. In order to evaluate the liquid-side mass transfer coefficient KLα the volumetric mass transfer coefficient KLα was dissociated into KL and the specific interracial area （a） since the last one was obtained from the gas hold-up and the bubble diameter. The effect of Reynolds number which define the hydrodynamic of the bubble flow has been also studied. Models of KLa and KL have been established to show the effects of the hydrodynamic parameters and liquid phase characteristics on the oxygen transfer rate.