The polymerisation of 2-furyl vinyl ketone

Summary 2-Furyl vinyl ketone was polymerised using anionic, cationic and free-radical initiators. Yields and molecular weights varied with the type of activation. Whereas radical polymerisation gave a product possessing a regular vinylic structure, other kinds of units were detected in the polymers prepared with anionic and cationic catalysts.     

Reg-1α, a New Substrate of Calpain-2 Depending on Its Glycosylation Status

Reg-1α/lithostathine, a protein mainly associated with the digestive system, was previously shown to be overexpressed in the pre-clinical stages of Alzheimer’s disease. In vitro, the glycosylated protein was reported to form fibrils at physiological pH following the proteolytic action of trypsin. However, the nature of the protease able to act in the central nervous system is unknown. In the present study, we showed that Reg-1α can be cleaved in vitro by calpain-2, the calcium activated neutral protease, overexpressed in neurodegenerative diseases. Using chemical crosslinking experiments, we found that the two proteins can interact with each other. Identification of the cleavage site using mass spectrometry, between Gln⁴ and Thr⁵, was found in agreement with the in silico prediction of the calpain cleavage site, in a position different from the one reported for trypsin, i.e., Arg¹¹-Ile¹² peptide bond. We showed that the cleavage was impeded by the presence of the neighboring glycosylation of Thr⁵. Moreover, in vitro studies using electron microscopy showed that calpain-cleaved protein does not form fibrils as observed after trypsin cleavage. Collectively, our results show that calpain-2 cleaves Reg-1α in vitro, and that this action is not associated with fibril formation.     

Is there functional vascular information in anatomical MR sequences? A preliminary in vivo study

According to the type of sequences used, either morphological or dynamic functional study can be performed using magnetic resonance imaging (MRI). The aim of this study is to find out if vascular information found, in dynamic MR sequences, already exists in anatomical MR sequences in the particular case of Legg-Calvé-Perthes disease (LCPD). LCPD is due to a loss of circulation to the femoral head in a growing child resulting in avascular necrosis and leading to possible distortion of size and shape of the proximal femur. MRI acquisitions consist in performing two anatomical sequences and one dynamic sequence with a gadolinium-diethylenetriamine pentaacetic acid (Gd-DTPA) injection. Five new parametric images characterizing hyper- and hypo-vascularized areas are computed from the dynamic MR sequence. For each new image, the two corresponding anatomical images are found and registered. Then, four types of regions of interest (ROIs) are extracted: healthy hyper- and hypo-vascularized areas and pathological hyper- and hypo-vascularized areas. First-order statistical parameters and texture parameters (Haralick's method, run length method, fractal parameters, autoregressive factors and Laws' texture energy method) are computed in each ROI. Then, a statistical study based on a T test is performed. Results show that some parameters could discriminate the four ROI types. Hence, dynamic vascular image and intrinsic anatomical image characteristics seem to be correlated. Finally, the disease can be evaluated with objective parameters using only anatomical sequences.     

Substitutional Atom Influence on the Electronic and Transport Properties of Mn4Si7

Mn₄Si₇ has been substituted with the following elements: Cu, Fe, Re and Cr on the Mn site, and Al, B, Ge, Sn, Ga, In, Na and Tl on the Si site. The Seebeck coefficient, electrical conductivity and power factor of the substitutional alloys have been evaluated by using density functional theory calculations, and the temperature dependence of the electronic transport properties has been investigated at different charge carrier concentrations by solving the semi-classical Boltzmann transport equation. We show that the substitution of Cu for Mn worsens the thermoelectric properties, while that with Fe appears the?most efficient for increasing the power factor. For In and Tl substitutions, the Seebeck coefficient is increased due to the high d-states contribution in the density of states at the Fermi level. Although the power factor is limited by a poor electrical conductivity, Mn₃₂Si₅₅Tl could exhibit a good figure of merit provided that the amount of Tl atoms is low (at most 1 at.%) and the charge carrier concentration is not too high (around 10²⁰ cm^?3).     

Identification of asymmetric constitutive laws at high temperature based on Digital Image Correlation

The mechanical characterization of ceramics can be very challenging. Depending on their composition and fabrication process, ceramic materials may exhibit at room temperature different types of mechanical behaviours, ranging from linear elastic to quasi-brittle, like rocks, concrete or plasters. At elevated temperature, they may present a non-linear behaviour, due for instance to the presence of a vitreous phase. However, estimating the evolution of their behaviour from room temperature to elevated temperature is a challenging topic, especially when there is an asymmetry between tension and compression. A methodology based on Digital Image Correlation is presented in this paper where four point bending tests are analysed for temperatures ranging from 25 °C to 900 °C. For a ceramic mainly made of aluminium titanate, the evolution of an asymmetric constitutive law is identified with a strong link with microstructural observations using SEM images.     

Involvement of GPx-3 in the Reciprocal Control of Redox Metabolism in the Leukemic Niche

The bone marrow (BM) microenvironment plays a crucial role in the development and progression of leukemia (AML). Intracellular reactive oxygen species (ROS) are involved in the regulation of the biology of leukemia-initiating cells, where the antioxidant enzyme GPx-3 could be involved as a determinant of cellular self-renewal. Little is known however about the role of the microenvironment in the control of the oxidative metabolism of AML cells. In the present study, a coculture model of BM mesenchymal stromal cells (MSCs) and AML cells (KG1a cell-line and primary BM blasts) was used to explore this metabolic pathway. MSC-contact, rather than culture with MSC-conditioned medium, decreases ROS levels and inhibits the Nrf-2 pathway through overexpression of GPx3 in AML cells. The decrease of ROS levels also inactivates p38MAPK and reduces the proliferation of AML cells. Conversely, contact with AML cells modifies MSCs in that they display an increased oxidative stress and Nrf-2 activation, together with a concomitant lowered expression of GPx-3. Altogether, these experiments suggest that a reciprocal control of oxidative metabolism is initiated by direct cell–cell contact between MSCs and AML cells. GPx-3 expression appears to play a crucial role in this cross-talk and could be involved in the regulation of leukemogenesis.     

Identification and Molecular Cloning of Putative Odorant-Binding Proteins from the American Palm Weevil, Rhynchophorus palmarum L.

We have identified and cloned the cDNAs encoding two odorant-binding proteins (OBPs) from the American palm weevil (APW) Rhynchophorus palmarum (Coleoptera, Curculionidae). Degenerate primers were designed from the N-terminal sequences and were used in polymerase chain reaction (PCR) in order to obtain full-length sequences in both males and females. In both sexes, two different cDNAs were obtained, encoding 123 and 115 amino acid-deduced sequences. Each sequence showed few amino acid differences between the sexes. The proteins were named RpalOBP2 and RpalOBP4 for male, RpalOBP2' and RpalOBP4' for female, with the types 2 and 4 presenting only 34% identities. These proteins shared high identity with previously described coleopteran OBPs. In native gels, RpalOBP2 clearly separated into two bands and RpalOBP4 into three bands, suggesting the presence of several conformational isomers. Thus, OBP diversity in this species may rely on both the presence of OBPs from different classes and the occurrence of isoforms for each OBP.     

Synthesis of cellulose triacetate-I from microfibrillated date seeds cellulose (<Emphasis Type="Italic">Phoenix dactylifera L.</Emphasis>)

Cellulose triacetate (CTA) has successfully been synthesized from microfibrillated date seeds cellulose. The cellulosic material under study constituted 84.9% amorphous phase with a degree of polymerization of 950. Acetylation was conducted at 50 °C under optimized heterogeneous conditions by acetic anhydride as acetyl donor, acetic acid as solvent and sulfuric acid as catalyst. In this process, cellulose was acetylated without dissolving the material throughout. The acetylated cellulose chains on the surface were dissolved gradually in acetic acid, which created new accessible zones. The yield of cellulose triacetate was studied varying acetic acid, acetic anhydride and catalyst concentrations, as well as reaction times. The ratio between the intensity of the acetyl C=O stretching band at around 1740 cm^?1 and the intensity of C–O stretching vibration of the cellulose backbone at 1020–1040 cm^?1 was used to optimize the reaction time. The optimal reaction conditions of 8% concentration of sulfuric acid, acetic anhydride/cellulose weight ratio of 3:1, acetic acid/cellulose weight ratio of 7:1, reaction time of 3 h and reaction temperature of 50 °C have given highest yield of cellulose triacetate, of about 79%. The obtained date seeds-based cellulose triacetate was characterized thoroughly by Fourier transform infrared (FTIR), X-ray diffraction (XRD), nuclear magnetic resonance spectroscopy (NMR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The synthesized product was identified as cellulose triacetate-I (CTA-I) characterized by a melting temperature of 217 °C and a decomposition temperature of 372 °C. These results demonstrated that date seeds can be used as potential source of microfibrillated cellulose which can be easily functionalized.     

Ripening conditions: A tool for the control of Listeria monocytogenes in uncooked pressed type cheese

The effect of ripening conditions (two temperatures, 9 °C and 13 °C, and two relative humidities 93% and 97%) on the growth of Listeria monocytogenes and other microbial populations was evaluated in the cores and rinds of uncooked pressed type cheeses prepared with pasteurised milk and inoculated either with Streptococcus thermophilus only or with an anti-listerial consortium. Regardless of temperature and relative humidity (RH), inhibition by the anti-listerial consortium was stronger in the cheese cores than in the rinds. Temperature had no significant effect on L. monocytogenes counts in cores or rinds. However, at the beginning of ripening in the consortium cheese, L. monocytogenes growth was more strongly inhibited at 13 °C than at 9 °C. Regardless of inoculation type and ripening temperature, counts of L. monocytogenes were significantly lower in the cores and rinds of cheeses ripened at 93% than at 97% RH. Lactobacilli counts were higher at 13 °C than at 9 °C and at 93% than at 97% RH. Lactobacilli can help to inhibit L. monocytogenes by catabolising galactose and producing lactate. Further investigations will be needed to evaluate the effect of ripening at 13 °C and 93% RH on the sensorial properties of cheese.     

A two-scale extended finite element method for modelling 3D crack growth with interfacial contact

3D fatigue crack growth problems are nowadays handled using X-FEM coupled with level set techniques. It is also well established that such an approach allows mesh-independent crack modelling and no remeshing during crack propagation. However, when contact and friction occur along the crack faces, a discretization of the internal variables linked to the interface law is necessary. The interface discretization is generally constructed from the finite elements cut by the crack. As a consequence, a mesh dependency between the bulk discretization and the interface discretization is introduced. However, the dimension of the possible non-linearities arising at the crack interface (like confined plasticity or unilateral contact with friction) may be several orders of magnitude finer than the crack size. A finer discretization is thus required to accurately capture these non-linearities. The aim of the present paper is to develop a method considering the 3D cracked structure and the crack interface as two independent global and local problems characterized by different length scales and different behaviors. Here, the interface is seen as an autonomous entity with its own discretization, variables and constitutive law. A formulation involving three-fields is used. The interface is linked to the global problem in a weak sense in order to avoid instabilities in the contact solution. Two iterative strategies are considered to solve the contact problem. Two-dimensional and three-dimensional numerical examples are presented to demonstrate the ability of the model to solve the contact at the crack interface with or without propagation at a given level of accuracy.