Influence of PS‐b‐PEO diblock copolymers on the compatibility of syndiotactic polystyrene modified epoxy blends

Homogeneous solutions of syndiotactic polystyrene (sPS) in diglycidylether of bisphenol A (DGEBA), containing 2.5, 5 and 7.5 wt % of thermoplastic with or without 0.5 and 1 wt % of poly(styrene‐b‐ethylene oxide) (PS‐b‐PEO) block copolymer, were polymerized using a stoichiometric amount of an aromatic amine hardener, 4,4′‐methylene bis (3‐chloro‐2,6‐diethylaniline) (MCDEA). The dynamic‐mechanical properties and morphological changes of sPS‐(DGEBA/MCDEA) compatibilized with different amount of PS‐b‐PEO have been investigated in this paper. The addition of the block copolymer produced significant changes in the morphologies generated. The size of the dispersed spherical sPS spherulites does not change significantly, but less spherulites of sPS appeared upon network formation in the systems with compatibilizer, what means that addition of compatibilizer in this system delayed crystallization of sPS in sPS‐(DGEBA/MCDEA) systems and change phase separation mechanism from crystallization‐induced phase separation (CIPS) and reaction‐induced phase separation (RIPS) almost only to RIPS. Moreover, PS‐b‐PEO with higher molecular weight of PS block seems to be a more effective compatibilizer than one with lower molecular weight of PS block. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 479–488, 2006     

Sinanodonta woodiana (mollusca: bivalvia: unionidae): isolation and characterization of the first microsatellite markers

Sinanodonta woodiana (Lea, 1834) is a large Unionid species with a real invasion success. It colonized Europe, Central America, the Indonesian Islands and recently North America. The species life cycle involves a larval parasitic stage on freshwater fish species which contributes to the spread of the mussel. In this paper we describe, for the first time, eight polymorphic microsatellite loci for the species Sinanodonta woodiana. The genetic screening of individuals confirmed that all loci were highly polymorphic. The number of alleles per locus ranged from 7 to 14 and the observed heterozygosity ranged from 0.650 to 0.950. These loci should prove useful to study the species population genetics which could help to infer important aspects of the invasion process.     

Studies on physico-chemical and antibacterial properties of grafted pullulans solutions

The physico-chemical properties of three grafted pullulans (P) having linked poly(3-acrylamidopropyl)trimethylammonium chloride (pAPTAC) as side chains (P-g-pAPTAC1, P-g-pAPTAC2 and P-g-pAPTAC3 with 22.53, 29.05, and 34.51 (wt.%) of pAPTAC content in polymer, respectively) and possessing polyelectrolyte character were determined by light scattering analysis. All grafted pullulan aqueous solutions were tested in the presence of 0.5 M NaCl, KCl, NaNO₃ or KNO₃. The biggest associations were recorded in 0.5 M NaCl aqueous solutions for P-g-pAPTAC1, P-g-pAPTAC2 and P-g-pAPTAC3 according to the maximum values for R_g extracted from MALLS (multiangle laser light scattering) measurements. Also, the dominant conformation in salted solution of these polyelectrolytes was random coil as Debye plot analysis revealed. Antibacterial activity was tested by Kirby–Bauer diffusion method and all grafted pullulans dissolved in aqueous solutions of 0.5 M NaCl have developed inhibition zone against Staphylococcus aureus (ATCC 25923).     

Novel thermosensitive flocculanting agent based on pullulan

New thermosensitive polysaccharide (P-g-pNIPAAm) was synthesized by graft-polymerization of p(N-isopropylacrylamide) (pNIPAAm) onto pullulan (P) using Ce(IV) ion as initiator. The grafted polysaccharide was characterized by FT-IR and ¹H NMR spectroscopy and elemental analysis. Its flocculation efficiency was studied in a clay suspension, in comparison with p(NIPAAm) homopolymer, as a function of the polymer dose, temperature and settling time. The thermosensitive polysaccharide could induce clay particle flocculation both below and above the lower critical solution temperature (LCST), but the process was more effective above the LCST. A lower value of the residual turbidity at the optimum polymer dose and a wider flocculation window were recorded at temperature above the LCST. The floc size distribution and surface morphology revealed bigger size flocs when the flocculation was performed above the LCST. The re-dispersion effect was negligible for the flocs obtained in the presence of P-g-pNIPAAm.     

Ceramics based on calcium phosphates substituted with magnesium ions for bone regeneration

In this study, chemical precipitation methods were used to obtain ceramic materials doped with magnesium ions in order to improve the regeneration properties of materials used for tissue engineering. Two different ratios of magnesium oxide were used to dope the ceramic powder, more precisely 5% and 10%. The synthesized materials were characterized to determine the calcination temperature of the precursor powder by means of thermal analysis; to determine the mineralogical composition, X-ray diffraction was employed and the scanning electron microscopy was used to determine the microstructure. To make use of these ceramics as biomaterials, viability and proliferation cell tests have been performed. Since synthetic materials have several limitations with regard to medical applications, the materials based on HAp substituted with Mg ions are a promising solution for the regeneration of bone defects because they have a similar bone structure. The presence of Mg in the material proves to be beneficial because this element plays an important role in bone cell regeneration, and more specifically, in stimulating osteoblast proliferation. The materials synthesized in this work present a suitable morphology for uses in bone regeneration because they offer to cells a friendly environment for growth and anchoring.     

In Vitro Macrophage Immunomodulation by Poly(ε-caprolactone) Based-Coated AZ31 Mg Alloy

Due to its excellent bone-like mechanical properties and non-toxicity, magnesium (Mg) and its alloys have attracted great interest as biomaterials for orthopaedic applications. However, their fast degradation rate in physiological environments leads to an acute inflammatory response, restricting their use as biodegradable metallic implants. Endowing Mg-based biomaterials with immunomodulatory properties can help trigger a desired immune response capable of supporting a favorable healing process. In this study, electrospun poly(ε-caprolactone) (PCL) fibers loaded with coumarin (CM) and/or zinc oxide nanoparticles (ZnO) were used to coat the commercial AZ31 Mg alloy as single and combined formulas, and their effects on the macrophage inflammatory response and osteoclastogenic process were investigated by indirect contact studies. Likewise, the capacity of the analyzed samples to generate reactive oxygen species (ROS) has been investigated. The data obtained by attenuated total reflection Fourier-transform infrared (FTIR-ATR) and X-ray photoelectron spectroscopy (XPS) analyses indicate that AZ31 alloy was perfectly coated with the PCL fibers loaded with CM and ZnO, which had an important influence on tuning the release of the active ingredient. Furthermore, in terms of degradation in phosphate-buffered saline (PBS) solution, the PCL-ZnO- and secondary PCL-CM-ZnO-coated samples exhibited the best corrosion behaviour. The in vitro results showed the PCL-CM-ZnO and, to a lower extent, PCL-ZnO coated sample exhibited the best behaviour in terms of inflammatory response and receptor activator of nuclear factor kappa-B ligand (RANKL)-mediated differentiation of RAW 264.7 macrophages into osteoclasts. Altogether, the results obtained suggest that the coating of Mg alloys with fibrous PCL containing CM and/or ZnO can constitute a feasible strategy for biomedical applications.