Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

Intercalated clays from pentaerythritol stearate for use in polymer nanocomposites

Smectite clays treated with quaternary ammonium salts have been utilized for decades in paints, greases, cosmetics, and personal care products as rheological modifiers. They have also been used in industrial wastewater treatment extensively. In more recent times these surface modified clays have demonstrated benefits in polymer/clay nanocomposites. The use of quaternary ammonium modifiers limits the usefulness of these composites in food packaging because they are not approved for direct food contact. It would be advantageous to have surface modifying chemicals acceptable for direct food contact in these composites. This article reports research conducted on a promising surface modifier pentaerythritol stearate (PS), which is approved by the FDA for inclusion in food as a preservative. The surface modification of montmorillonite with PS is reported in detail as well as the production of nanocomposites with selected polymers made with the modified clay. Molecular modeling and purification of commercial PS samples indicate that the mono‐ and diesters are the critical surface modifiers, although the as received commercial material works well in forming intercalated clay complexes. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The interactive editing and contouring of empirical fields

A system for the interactive editing and contouring of surfaces derived from empirical fields is described. The approach taken begins with the representation of a field as a general-order, nonuniform, tensor-product, B-spline surface. It provides an interactive display for editing the surface by control-vertex manipulation and a contouring algorithm that is specifically designed for the fast and robust contouring of B-spline surfaces. Interactive editing of the resulting model is feasible because of the local nature of editing changes when B-splines are used. The use of nonuniform B-splines gives the flexibility required to model highly irregular data efficiently     

Safety assessment of the NET Predesign

Work carried out by European Associations on Safety and Environment inside the EC Fusion Technology Programme and by NET has been concentrated on safety-related guidance and on safety assessment of the NET Predesign. Emphasis has been put on analysis of accident sequences of regulatory concern up to worst case accidents, including quantification of consequences to components, systems, and plant, and of doses to the public. Probabilistic safety studies for the most important systems and broadly for the entire plant have been performed to supplement the calculated accidental doses by expectation values for their occurrence rate, and to check the relevance of the reference accident sequences selected initially by judgment. Waste masses per year of operation and for decommissioning have been quantified. For two countries and according to the practices and regulations of these countries, volumes of radioactive waste packaged for final disposal have been determined.Presented at the IAEA Technical Committee Meeting on Developments in Fusion Safety, Toronto, June 7–11, 1993.     

Creating non-minimal triangulations for use in inference in mixed stochastic/deterministic graphical models

We demonstrate that certain large-clique graph triangulations can be useful for reducing computational requirements when making queries on mixed stochastic/deterministic graphical models. This is counter to the conventional wisdom that triangulations that minimize clique size are always most desirable for use in computing queries on graphical models. Many of these large-clique triangulations are non-minimal and are thus unattainable via the popular elimination algorithm. We introduce ancestral pairs as the basis for novel triangulation heuristics and prove that no more than the addition of edges between ancestral pairs needs to be considered when searching for state space optimal triangulations in such graphs. Empirical results on random and real world graphs are given. We also present an algorithm and correctness proof for determining if a triangulation can be obtained via elimination, and we show that the decision problem associated with finding optimal state space triangulations in this mixed setting is NP-complete.     

Cytomorphometric markers for uterine cancer in intermediate cells

Precise microphotometric assessment of intermediate cells from patients with normal cervical cytology and from patients with dysplasia or carcinoma in situ shows the existence of small but consistent differences. Marker features for the presence of premalignant and malignant disease can be extracted from the cell images of "normal"-appearing intermediate cells. The marker features and their diagnostic classification potential are described.     

Acute side-effects of drugs. Causes and prevention

A successful therapy with causative acting drugs (e.g. antibiotics, hormones) or with symptomatic acting drugs (e.g. antihypertensive, psychopharmacological drugs, anticoagulants) cannot be practicable without secondary effects. These unavoidable "side-effects" either are of no consequence or, these have to be risked and to be controlled, especially in long-term-therapy. Often, it is impossible to foresee allergic reactions. Avoidable "side-effects" may be dangerous in case of patient's self-medication, medical negligence or in case of drug interactions. 5 classes of drugs with possible threatening secondary effects are demonstrated: glykosides, sulfonylureas (antidiabetics), coumarin derivatives (anticoagulants), corticosteroids and parenteral contrast mediums.     

Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement

The growing demand for stony corals as ornamental aquarium animals requires defined aquacultural breeding strategies. For the sexual propagation of corals, material substrates are needed, that attract larvae and support their settlement and development. In this study, five types of highly porous ceramic materials were developed following the example of coral skeleton. The applicability of these settlement substrates was tested using larvae of the stony coral Pocillopora damicornis. Partial sintering of pressed clay pellets, freeze casting of clay and alumina-mullite based slurries and direct foaming of high alkane phase emulsified suspensions (HAPES) using alumina were employed. By the addition of mm-sized spherical polystyrene beads as sacrificial templates during freeze casting (alumina-mullite), superficial pores in the size of the larvae were created. The inorganic substrates featured open porosities between 35% (pressed clay) and 83% (foamed alumina), pore sizes ranging from nm to mm-scale and pore morphologies dominated by interparticle porosity (pressed), lamellar pores (freeze casting) and cellular pore types (direct foaming). The ceramic substrates were incubated in artificial sea water for 3 months to induce necessary biofilm formation and algae growth. Afterwards, individual substrates were exposed to 5 coral larvae, and their settlement behavior was monitored over 14 days. At the end of this period, all ceramic materials were successfully accepted as settlement substrates, with a mean settlement rate of 46.2%, and no significant differences between the substrate types. On samples with large surface superficial pores, a significantly reduced survival of settled larvae (79%) compared to the other porous materials (93–98%) was determined, suggesting a non-ideal surface topography. While alumina foam samples (HAPES) exhibit the most promising results in terms of settlement and survival of larvae, clay-based substrates provide a more economic solution for the sexual propagation of corals in aquaculture.     

Advanced Alumina Composites Reinforced with Titanium-Based Alloys

New (inter)metallic-ceramic composites for high-temperature structural and functional applications are prepared via high-energy ball milling. During compaction by pressureless sintering, dense Al₂O₃/Ti-based alloy composites are formed that consist of inter-connected networks of the ceramic and the (inter)metallic phases. Ti-Al-V/Al₂O₃ and Ti-Al-Nb/Al₂O₃ composites show enhanced damage tolerance over monolithic Al₂O₃, i.e ., fracture toughnesses up to 5.6 MPa·m^0.5 and bending strengths up to 527 MPa. The resistance against abrasive wear is almost doubled with respect to monolithic Al₂O₃ ceramic. Electrical resistivity scales with the ceramic volume fraction and ranges between 0.3 mΩ·cm and 55.1 mΩ·cm, with only a weak temperature dependence ≤700°C.