High-efficiency finishing process for metal mold by large-area electron beam irradiation

A new finishing process for metal molds by large-area electron beam (EB) irradiation is proposed in this study. In the large-area EB irradiation equipment used here, an EB with high-energy density is irradiated without focusing the beam, and so the EB with a maximum diameter of 60 mm can be used for melting or evaporating metal surface instantly. Experimental results show that the surface roughness decreases from 6 μmRz to less than 1 μmRz in just a few minutes under proper machining conditions. The corrosion resistance of metal mold surface also could be greatly improved by large-area EB irradiation. Furthermore, the surface roughness of tilting surface close to 90° could be well improved. Therefore, large-area EB irradiation method has a possibility to become a high-efficiency finishing process for metal molds.     

Radiation damage induced in Si photodiodes by high-temperature neutron irradiation

Results are presented of a detailed study of the effects of high-temperature 4-MeV neutron irradiation on the performance degradation of Si pin photodiodes together with the radiation-induced defects, observed by deep level transient spectroscopy (DLTS). It was found that the dark current increases after irradiation, while the photocurrent decreases. After irradiation, two majority electron capture levels with (E _c–0.22 eV) and (E _c–0.40 eV) were induced in the n-Si substrate, while one minority hole capture level with (E _v+0.37 eV) was found. Additionally, the degradation of the device performance and the introduction rate of the lattice defects decreases with increasing irradiation temperature. For a 250 °C irradiation, the reduction of the reverse current is only 20% of the starting value. This result suggests that the creation and recovery of the radiation damage proceeds simultaneously at high temperatures.     

Dissimilarity scaling and INDSCAL analysis in the study of flavour differences between normal pHu and DFD beef

Overall dissimilarity measurement of paired stimuli followed by Individual Differences Scaling (INDSCAL) analysis was used to study flavour perception in a set of beef extracts. The experiment was designed to determine whether pH contributed to flavour difference between beef of “normal” ultimate pH (pHu5.8) and “dark-cutting” (DFD) beef (pHu6.2). Assessors distinguished the flavour of “normal” pHu and DFD beef both by a combination of pH and titratable acidity, and a second dimension independent of pH. The chemicals added to adjust pH independently of the original muscle composition contributed a third flavour dimension. Substantial assessor variation was observed in the relative weight given to the three flavour dimensions, and this is discussed in relation to the task of judging overall dissimilarity.     

The role of prostate specific antigen in diagnosis of localized adenocarcinoma of the prostate. Nara Uro-Oncology Research Group

The number of cases of prostate carcinoma (PCA) is steadily inceasing in Japan. The clinical application of a reliable tumor marker, prostate specific antigen (PSA) for the diagnosis, as well as the increasing elderly population in Japan may account for this increase. The subjects were patients at the Nara Medical University and its affiliated hospitals; 1) 687 cases without PCA were evaluated for age-specific PSA and the incidence of abnormal PSA following urological manipulations, 2) 135 cases with histological proven BPH by transurethral resection of prostate (TUR-P) were examined for PSA density (PSAD) and positive PSA rate in BPH, 3) 135 cases receiving a needle biopsy with suspicion of PCA were examined for the efficacy of PSA and PSAD and other parameters, and 4) 459 PCA cases treated between 1988 and 1994, were examined for specific PSA and PSAD values by stage and degree of cell differentiation. The PSA assay used in this study was MARKIT-M PA (normal range < or = 3.6 ng/ml). The PSA was decreased gradually with age in non-PCA patients, and abnormal PSA was found in 5.5% of these patients following manipulations. The average PSA was 2.95 +/- 2.03 ng/ml in 130 BPH patients (mean age: 71.1 +/- 7.0 years old. and average prostate volume: 32.9 +/- 16.1 ml). And abnormal PSA level (more than 3.61 ng/ml) was found in 22.3%. The mean PSAD was 0.1.0 +/- 0.06, and PSAD was below 0.15 in 86.1% of these BPH cases. Among the 135 cases receiving a needle biopsy, 33 cases had PSA values between 3.61 and 10.0 ng/ml. Of these cases, PCA was found in 18.5% of the 27 cases with a PSAD below 1.5, and in 33.3% of the 6 cases with a PSAD over 1.5. PSA and PSAD were proportionally increased with stage, and a significant difference in the PSA value was observed between stage B1 and B2, and stage C and D (P < 0.05). However, PSA and PSAD values were not significantly correlated with the cell differentiation in PCA stage A2-C. In total, PSA was 18.1 ng/ml in well, 23.9 ng/ml in moderately and 35.9 ng/ml in poorly differentiated type PCA. The positive rate of PSA was 22.3, 65.4 and 83.5%, that of prostate acid phosphatase (PAP) was 10.0, 17.8 and 45.8%, and that of GSM was 25.0, 14.7 and 68.4%, in BPH, stage A PCA and stage BPCA, respectively. In conclusion, PSA is the most reliable tool in the diagnosis of localized PCA. However, the differential diagnosis of BPH and localized PCA is difficult when the PSA value is between 3.61 and 10.0 ng/ml, and accurate staging of localized PCA is difficult with PSA or PSAD alone. At present, it is necessary to use all possible tools for the early detection of localized PCA, and to perform the needle biopsy in all PCA-suspicious cases.     

The Attenuated Secretion of Hyaluronan by UVA-Exposed Human Fibroblasts Is Associated with Up- and Downregulation of HYBID and HAS2 Expression via Activated and Inactivated Signaling of the p38/ATF2 and JAK2/STAT3 Cascades

Little is known about the effects on hyaluronan (HA) metabolism of UVA radiation. This study demonstrates that the secretion of HA by human dermal fibroblasts (HDFs) is downregulated by UVA, accompanied by the down- and upregulation of mRNA and protein levels of the HA-synthesizing enzyme (HAS2) and the HA-degrading protein, HYaluronan Binding protein Involved in HA Depolymerization(HYBID), respectively. Signaling analysis revealed that the exposure distinctly elicits activation of the p38/MSK1/CREB/c-Fos/AP-1 axis, the JNK/c-Jun axis, and the p38/ATF-2 axis, but downregulates the phosphorylation of NF-kB and JAK/STAT3. A signal inhibition study demonstrated that the inhibition of p38 significantly abrogates the UVA-accentuated mRNA level of HYBID. Furthermore, the inhibition of STAT3 significantly downregulates the level of HAS2 mRNA in non-UVA exposed HDFs. Analysis using siRNAs demonstrated that transfection of ATF-2 siRNA but not c-Fos siRNA abrogates the increased protein level of HYBID in UVA-exposed HDFs. An inhibitor of protein tyrosine phosphatase but not of protein serine/threonine phosphatase restored the diminished phosphorylation level of STAT3 at Tyr 705, accompanied by a significant abolishing effect on the decreased mRNA expression level of HAS2. Silencing with a protein tyrosine phosphatase PTP-Meg2 siRNA revealed that it abrogates the decreased phosphorylation of STAT3 at Tyr 705 in UVA-exposed HDFs. These findings suggest that the UVA-induced decrease in HA secretion by HDFs is attributable to the down- and upregulation of HAS2 and HYBID expression, respectively, changes that are mainly ascribed to the inactivated signaling of the STAT3 axis due to the activated tyrosine protein phosphatase PTP-Meg2 and the activated signaling of the p38/ATF2 axis, respectively.     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

Mie scattering from sphere structures in polymer blends

Polymer blends of transparent poly(methyl methacrylate) and polystyrene become opaque due to light scattering at the boundaries of the two polymers. The polymer blend is light brown when it is illuminated by white light. The coloring depends on the spherical domain structures existing in the polymer blend. The coloring was analyzed by using the rigorous Mie theory. The Mie results were compared with the semiempirical results previously reported by the authors. The wavelength dependence of theoretical scattering efficiencies on radii of scattering spheres from 0.05 to 1.2 μm was obtained for polystyrene spheres in poly(methyl methacrylate) matrix, and vice versa. The scattering at the short wavelength region is stronger than at the long wavelength region. The scattering efficiencies become almost constant in the visible wavelength region for sufficiently large spheres.     

An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Recognition of substrates by membrane potential of immobilized glucose oxidase membranes

The shifts in membrane potential, caused by the injection of glucose into a permeation cell, were measured using immobilized (entrapped) glucose oxidase membranes. No, pH change in the permeation cell was observed upon injection of glucose, but the shift in membrane potential was definitely detected. The shift in membrane potential was observed under nitrogen bubbling (in the absence of oxygen) using initially used enzyme membranes. It was, therefore, suggested that the shifts in membrane potential were not caused by an enzyme-substrate reaction, but by binding of the substrate to the enzyme, which indues a conformational change in the enzyme and leads to a change in charge density in the enzyme membrane. This mechanism is also supported by the fact that the shifts in membrane potential were observed upon injection of not only D-glucose but also L-glucose as reported in our previous study [J. Chem. Soc. Faraday Trans., 87 , 695 (1991)]. © 1994 John Wiley & Sons, Inc.     

Retardation of volatile aldehyde formation in the exhaust of frying oil by heating under low oxygen atmospheres

Volatile aldehydes were generated in the exhaust of high-oleic safflower oil during heating at 180°C by spraying water into atmospheres with four levels of oxygen concentrations (2, 4, 10, and 20%). These aldehydes were quantitatively analyzed by HPLC after the conversion to 2,4-dinitrophenyl hydrazones. Ten alkanals (C₂ through C₁₀), eight 2-alkenals (C₃ through C₁₀) and three 2,4-alkadienals (C₇, C₉, and C₁₀) were found. These aldehyde levels were found to be positively correlated with both the heating time and the atmospheric oxygen concentration. The total amounts of aldehydes were the lowest in the oil heated in an atmosphere with 2% O₂, and corresponded to 1/10 of those in the atmosphere with 20% O₂. Acrolein was not found in oils heated in the atmosphere with 2% oxygen. These results suggest that frying in atmospheres with low oxygen levels can effectively decrease the generation of volatile aldehydes in the exhaust.