LBMBS： A Load-Balanced Moveable Bubble Scheme for Tori Interconnection Networks

Moveable bubble flow control is an efficient technique to avoid deadlock for torus networks. However, it does not take into consideration the load balance feature. Therefore, this leads to inefficient resources utilization. Moreover, packets may be discarded due to the congestion of a network area. On the other hand, there are other algorithms that consider load balancing such as rHALB （r hop adaptive load-balanced）routing technique. Nonetheless, rHALB detects deadlock using the timeout threshold. This concept of deadlock detection may give incorrect responses in case the traffic is high. Therefore, packets are dropped although there is no deadlock. At the end, this affects the whole performance of the network. This paper proposes a new routing algorithm for tori interconnection networks, namely, the LBMBS （load-balanced moveable bubble scheme）. LBMBS integrates both concepts of moveable bubble and rHALB in order to provide at the end a load-balanced efficient deadlock-free algorithm. The protocol details are given and compared against other routing algorithms in the literature.     

Low-temperature phase formation in the SrF2–LaF3 system

Phase formation in the SrF₂–LaF₃ system was studied at temperatures ranging from 300°C to 450°C using nitrate flux. The solubility of LaF₃ in SrF₂ decreases with decreasing temperature. The equilibrium width of the solid solution region Sr_1−xLa_xF_2+x at 400°C, it is 44.6 ± 0.4 mol% LaF₃ (x = 0.446), at 350°C — 38.3 ± 0.7 mol% LaF₃ (x = 0.383), and decreases almost to zero at 300°C.     

Environmental support hypothesis in designing multimedia training for older adults: Is less always more?

This study explores younger and older adults learning of MS Publisher functionalities from a multimedia tutorial. Twenty younger and twenty three older adults assigned to a redundant (experimental) or non-redundant (control) condition were taught how to create a greeting card, while the results of their learning were assessed with immediate and delayed performance measures. While younger learners benefited from a non-redundant condition, older learners exhibited an opposite trend. Redundant condition was beneficial for their performance efficiency on a set of a transfer tasks, and their troubleshooting performance during the delayed session. From a cognitive load perspective, using a redundant text along with an audio narration overloads learner’s working memory by placing more strain on the visual pathway and not providing any additional cognitive advantage. From an environmental support standpoint and decreased processing resources view of cognitive aging, providing additional representational support helps reducing the task demands for older adults and results in better learning. The results have cognitive and practical implications for the design of multimedia learning environments for older adults.     

One‐pot synthesis of {Mo6I8}4+‐doped polystyrene microspheres via a free radical dispersion copolymerisation reaction

Molybdenum octahedral clusters, when incorporated into an appropriate polymer matrix, are considered as promising agents for a range of biological applications. This work describes the one‐pot synthesis, morphology and cellular toxicity of nano‐sized polystyrene beads doped with luminescent cluster complexes [{Mo₆X₈}(NO₃)₆]^2? (X = Cl, Br or I). Specifically, the particles were obtained by free radical dispersion copolymerisation of styrene and methacrylic acid or 4‐vinylpyridine in the presence of the cluster complexes. The effects of the cluster loading in the reaction mixture on both the content of the final material and number‐average molar mass of the copolymers were evaluated. © 2017 Society of Chemical Industry     

Microfluidic Tumor-on-a-Chip Model to Study Tumor Metabolic Vulnerability

Tumor-specific metabolic adaptations offer an interesting therapeutic opportunity to selectively destroy cancer cells. However, solid tumors also present gradients of nutrients and waste products across the tumor mass, forcing tumor cells to adapt their metabolism depending on nutrient availability in the surrounding microenvironment. Thus, solid tumors display a heterogenous metabolic phenotype across the tumor mass, which complicates the design of effective therapies that target all the tumor populations present. In this work, we used a microfluidic device to study tumor metabolic vulnerability to several metabolic inhibitors. The microdevice included a central chamber to culture tumor cells in a three-dimensional (3D) matrix, and a lumen in one of the chamber flanks. This design created an asymmetric nutrient distribution across the central chamber, generating gradients of cell viability. The results revealed that tumor cells located in a nutrient-enriched environment showed low to no sensitivity to metabolic inhibitors targeting glycolysis, fatty acid oxidation, or oxidative phosphorylation. Conversely, when cell density inside of the model was increased, compromising nutrient supply, the addition of these metabolic inhibitors disrupted cellular redox balance and led to tumor cell death.     

Noise Effect on Ice Surface Softening During Friction

The ice surface softening by friction is investigated considering the additive non-correlated fluctuations of the shear strain and stress, and the temperature. The premelting is construed by the Kelvin–Voigt equation for shear strain and by the relaxation equations of Landau–Khalatnikov type for shear stress and temperature. Taking into account the noises in these equations, the Langevin and Fokker–Planck equations are derived. Their analysis is based on the investigation of extrema of the distribution function, i.e., steady-state values of the shear strain using the Stratonovich interpretation. The phase diagrams are constructed, where the noises intensities and thermostat temperature determine the regions of ice, softened ice and their mixture (stick–slip rubbing). We present that domain of ice friction is bounded by relatively small background sliding block temperatures and fluctuation intensities of the stress and temperature. The ice film softens with growth of the stress noise intensity even at small thermostat temperatures. The friction force time series for all rubbing modes are calculated and compared with experimentally observed ones.     

Synthesis,structure and behavior of new polycaprolactam copolymers based on poly (ethylene oxide)–poly (propylene oxide)–poly (ethylene oxide) macroactivators derived from Pluronic block copolymers

Novel series of poly (CL–co–Pluronic) polymers were successfully synthesized in situ by ring-opening polymerization (ROP) of ε-caprolactam (ε-CL). The copolymerization was activated by new type macroactivators (MAs) based on hydroxyl-terminated poly (ethylene oxide)-poly (propylene oxide)-poly (ethylene oxide) [PEO-PPO-PEO] triblock copolymers, known under the trade name Pluronic^®. Toluene-2,4-diisocyanate (TDI) was used to obtain the isocyanate-terminated Pluronic prepolymers. The corresponding MAs were synthesized in situ with an N-carbamoyllactam structure. As an initiator of the copolymerization processes was used sodium lactamate (NaCL). To confirm the influence over the copolymerization process, microstructure, composition and molecular weight of the polymeric products two new types MAs based on Pluronic (P123 and F68) have been varied from 2 to 10 wt.% (vs. the monomer ε-CL). The structure of the both Pluronic based macroactivators (MAs) and accordingly obtained two series poly (CL-co-Pluronic) polymers were confirmed by ¹H NMR and FT-IR analyses. Additionally, the structure, molecular weight, physicomechanical behavior, thermal stability and morphology of the new synthesized poly (CL–co–Pluronic) polymers have been investigated by Differential Scanning Calorimetry (DSC), Wide-Angle X-ray Diffraction (WAXD), Thermogravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM) analysis.     

Transport and solvent sensing characteristics of styrene butadiene rubber nanocomposites containing imidazolium ionic liquid modified carbon nanotubes

Obtaining strong interfacial interaction between filler and polymer matrix is very crucial for the fabrication of polymer nanocomposites with superior performance. Present study is aimed to fabricate high performance styrene butadiene rubber (SBR) nanocomposites with imidazolium type ionic liquid modified multiwalled carbon nanotube (MWCNT). Ionic liquid facilitates the dispersion of MWCNT in rubber matrix and it is obvious from transmission electron microscopy images. Diffusion of toluene through SBR nanocomposite membranes has been investigated as a function of surface modified MWCNT (f-MWCNT) content to analyze the chain dynamics and filler-polymer interactions. O₂ gas barrier effect of nanocomposites with special reference to the filler loading is explored. The substantial improvement in the barrier effect in presence of filler interpreted on the grounds of a theoretical model describing permeability of heterogeneous systems. Finally solvent sensing characteristics of prepared nanocomposites are also analyzed and it is observed that prepared nanocomposites can be used as a flexible solvent sensor.     

Investigating Biomarkers for USH2A Retinopathy Using Multimodal Retinal Imaging

Pathogenic mutations in USH2A are a leading cause of visual loss secondary to non-syndromic or Usher syndrome-associated retinitis pigmentosa (RP). With an increasing number of RP-targeted clinical trials in progress, we sought to evaluate the photoreceptor topography underlying patterns of loss observed on clinical retinal imaging to guide surrogate endpoint selection in USH2A retinopathy. In this prospective cross-sectional study, twenty-five patients with molecularly confirmed USH2A-RP underwent fundus autofluorescence (FAF), spectral-domain optical coherence tomography (SD-OCT) and adaptive optics scanning laser ophthalmoscopy (AOSLO) retinal imaging. Analysis comprised measurement of FAF horizontal inner (IR) and outer (OR) hyperautofluorescent ring diameter; SD-OCT ellipsoid zone (EZ) and external limiting membrane (ELM) width, normalised EZ reflectance; AOSLO foveal cone density and intact macular photoreceptor mosaic (IMPM) diameter. Thirty-two eyes from 16 patients (mean age ± SD, 36.0 ± 14.2 years) with USH2A-associated Usher syndrome type 2 (n = 14) or non-syndromic RP (n = 2) met the inclusion criteria. Spatial alignment was observed between IR-EZ and OR-ELM diameters/widths (p < 0.001). The IMPM border occurred just lateral to EZ loss (p < 0.001), although sparser intact photoreceptor inner segments were detected until ELM disruption. EZ width and IR diameter displayed a biphasic relationship with cone density whereby slow cone loss occurred until retinal degeneration reached ~1350 μm from the fovea, beyond which greater reduction in cone density followed. Normalised EZ reflectance and cone density were significantly associated (p < 0.001). As the strongest correlate of cone density (p < 0.001) and best-corrected visual acuity (p < 0.001), EZ width is the most sensitive biomarker of structural and functional decline in USH2A retinopathy, rendering it a promising trial endpoint.