Modelling biological processes under anaerobic conditions through integrating titrimetric and off-gas measurements-applied to EBPR systems.

An innovative method for modelling biological processes under anaerobic conditions is presented and discussed. The method is based on titrimetric and off-gas measurements. Titrimetric data is recorded as the addition rate of hydroxyl ions or protons that is required to maintain pH in a bioreactor at a constant level. An off-gas analysis arrangement measures, among other things, the transfer rate of carbon dioxide. The integration of these signals results in a continuous signal which is solely related to the biological reactions. When coupled with a mathematical model of the biological reactions, the signal allows a detailed characterisation of these reactions, which would otherwise be difficult to achieve. Two applications of the method to the enhanced biological phosphorus removal processes are presented and discussed to demonstrate the principle and effectiveness of the method.     

A fuzzy logic rule-based automatic target recognizer

Methods for modeling and managing uncertainty in computer vision systems have received increased attention in recent years. Automatic target recognition is one application area of computer vision where the demands are particularly acute. In this article, fuzzy logic is proposed as a means of handling uncertainty in an expert system structure for automatic target recognition. A new technique for logical inference is described which is well-suited for this type of application. A prototype system has been developed and tested on multisensor and temporal images. the results are compared to a similar expert system which used a numeric uncertainty calculus.     

Work-oriented development of knowledge-based systems: a case for multiple perspectives

System development is strongly influenced by the perspectives used by system developers. Current development methods for knowledge-based systems are based on an information processing perspectives of experts and users which has been criticized by a number of researchers. The paper argues that work-oriented development of knowledge-based systems requires the parallel use of multiple perspectives (including the information processing perspective), and that the use of any single perspective is potentially dangerous. As an example of the importance of using multiple perspectives, thepaper presents the situated action perspective, and shows how it complements the information processing perspective.     

Electrical conductivity in iodine-doped ethyl cellulose

The electrical conductivity of solution-grown ethyl cellulose (EC) films, 5–30 μm thick, has been studied in the sandwich configuration (metal–EC–metal) as a function of iodine concentration from 0.5 to 5.0 wt% ratio. The studies were conducted in the temperature range 333–383 K, while the field was varied over the range (3.0–5.5) × 10⁴V/cm. Aluminium was used as the lower electrode, while the upper electrode was of Al, Ag, Cu, Au or Sn. Certain transient effects such as a large burst of current immediately after the application of field were observed. An attempt was made to identify the nature of the current by comparing the observed dependence on electric field, electrode material and temperature with the respective characteristic features of the existing theories of electrical conduction. The results show that the electrical conduction follows Ohm's law at lower fields, while at higher fields, space-charge limited current (SCLC) was observed. It was also found that Richardson–Schottky emission was responsible, to some extent, for the transport of charge carriers in the polymer. The conductivity of the films increased on doping with iodine. The dopant molecules are considered to act as additional trapping centes and provide links between the polymer molecules in the amorphous region, thus resulting in the formation of charge transfer complexes.     

Optimal Control of Solar Sludge Dryers

Optimal control (OC) methodology is used to develop a control policy for a batch-operated solar sludge dryer with ventilation as the dominant control. Batch performance criteria and instantaneous optimization criteria are developed for two economic environments: quota limited and capital limited. The general formulation, as well as simplifications resulting from the multiplicative form of the evaporation (drying) rate model, are presented. The multiplicative form results in a single constant number, called here “control intensity,” which is used to guide the on-line control decisions. These decisions turn out to be independent of the dry solids content (DSC) of the sludge. Further simplification, by assuming a strictly constant weather, is used to demonstrate the general effects of the economic and physical (weather) environment on the solution.

The OC approach is used to address, via simulation under realistic weather conditions, several design, operation, and pricing problems. In particular, the following have been considered: sizing of the ventilation fans, determination of a fair fee for sludge disposal, finding the best final DSC, and evaluating the effect of the price of electricity. Regarding the particular location represented by the data, it has been shown that the installed capacity of the ventilation fans should be increased and that there seems to be sufficient economic incentive for solar drying.     

A pulsed neural network model of spectro-temporal receptive fields and population coding in auditory cortex

The existence of spectro-temporal receptive fields and evidence for population coding in auditory cortex motivate the development of such models, that explicitly operate in the time-frequency domain and are based on a pulsed neural network. In presenting such a model, a formal connection of the fields of Time Frequency Analysis and Pulsed Neural Networks is established. The resulting neural time-frequency signal representation is shown to be representable as a signal-dependent overcomplete dictionary. It is derived from neural population coding. Signal decomposition and filtering effects are presented, indicating obvious technical applications of the proposed model. This revised version was published online in June 2006 with corrections to the Cover Date.     

Microscopy under pressure--an optical chamber system for fluorescence microscopic analysis of living cells under high hydrostatic pressure

High hydrostatic pressure (HHP) becomes more and more interesting for life science research, since it can be employed to inactivate various cells. To directly monitor "cells under pressure," the development of an optical high-pressure chamber is required. Therefore, an optical pressure chamber that can be used for up to 300 MPa was constructed. This chamber has already been described as a tool for in situ observation of dynamic changes of microscopic structures in bright field as well as phase contrast. In combination with an inverted microscope, we obtained brilliant microscopic color pictures with an optical resolution more than 0.56 microm. Here, we demonstrate the capabilities of the HHP cell, in combination with epifluorescence microscopy. Using a nonadherent human B-cell line (Raji, ATCC CCL 86), stained with the fluorescent dyes propidium iodide, Hoechst 33342, or dihexyloxacarbocyanine iodide, we were able to show that the system is suitable to perform fluorescence microscopic analyses, with pressures up to 300 MPa, with viable mammalian cells.     

Optimizing wheel profiles and suspensions for railway vehicles operating on specific lines to reduce wheel wear: a case study

Multibody System Dynamics - The selection of a wheel profile is a topic of great interest as it can affect running performances and wheel wear, which needs to be determined based on the actual...     

Reconfigurable handling system

The demand for more versatile assembly and handling systems to facilitate customized production is gaining in importance, especially with regard to the constantly-increasing cost pressure, to expansion of the range of product versions and the shortening of innovation cycles. As a cost-effective approach for frequently changing assembly tasks, a novel manipulation concept has been developed by combining given robot technologies. This new handling system has a modular and adaptable layout, which consists of several mobile arms to manipulate the object in six-dimensional Cartesian space. After grasping, when the arms are attached to the object, the mechanical architecture is similar to parallel manipulators or cooperating robots. As the mounting and gripping points of the arms can easily be changed, the manipulator can be reconfigured so as to match the user’s preferences and needs. In addition to the kinematic adaption the regarding task, the hardware and new functions can be reconfigured as well. Contact elements, measurement and assembly devices as well as testing modules can easily be in integrated in the concept. A modular automatic control concept combined with a self-optimizing planning tool helps the user to find the optimal configuration and realize it in an economic way.