Crossflow microfiltration of gum arabic solutions: Comparison of the classical system with the co-current permeate flow system

Gum arabic is a natural gum exuded mainly by the trees Acacia senegal , currently used in the food industries for its emulsifying, thickening and stabilizing properties. Its present processing includes various operations providing a quite turbid product. Crossflow microfiltration could be interesting for the clarification and the cold-pasteurization of the gum arabic solutions. Several experiments were therefore made with the crossflow microfiltration unit at ENSIA, using two different systems: the classical one (without permeate circulation), and the co-current permeate flow system (CCPF) allowing the exploration of the low transmembrane pressures range. With gum arabic solutions of 0.17g solids g⁻¹ solution and 70°C, the best results after 60 min of filtration (105.7 L h⁻¹ m⁻², 4.4% of solids retention and 83.4% of clarification) were obtained with the CCPF system at low transmembrane pressure and high crossflow velocity (0.3 bar and 7.5ms⁻¹).     

Temperature-induced phase change in a fat. A study by electron spin resonance

Electron Spin Resonance, Differential Scanning Calorimetry and rheological techniques have been used to study the physical changes induced by temperature in lard and in the solid and liquid fractions obtained by fractionation of lard at 15 C. The mobilization process of a C18 fatty acid nitroxide derivative dispersed in the molten fat has been observed in the temperature range −50 to +70 C. The mobilization of the probe seemed to be concomitant with the melting of the low melting point glycerides. Above this temperature, all the probes were in the liquid phase and their mobility reflected the viscosity of their liquid environment, or the viscosity of the bulk fat when crystal was no longer present. Probe mobility was temperature dependent, and it was identical for the three fats at the same temperature, despite their different triglyceride compositions.     

Microstructure and Mechanical Properties of Hot-Pressed Silicon Carbide-Aluminum Nitride Compositions

A flexural strength of up to 1 GPa was achieved in SiC-AIN materials and is attributed to a dense, equiaxial grain structure of the 2H(δ) SiC-AIN solid solution, with a relatively uniform grain size of ∼ 1 μm. The strength was found to decrease with increasing grain size. While the β→α phase transformation and the formation of various metastable polytypes make microstructural control difficult in SiC materials, excellent control is facilitated in SiC-AIN materials as a result of the stable 2H solid solution. Several mechanisms of grain refinement during the β→ 2H transition were observed, most notably the direct formation of several 2H grains from a single β grain. In addition, grain growth is limited by the diffusion-controlled nature of the transition. These mechanisms could be utilized to achieve even higher strength values, with potentially higher reliability of the materials in structural applications.     

Reasoning about fuzzy temporal information from the web: towards retrieval of historical events

When searching for information about historical events, queries are naturally formulated using temporal constraints. However, the structured temporal information needed to support such constraints is usually not available to information retrieval systems. Furthermore, the temporal boundaries of most historical events are inherently ill-defined, calling for suitable extensions of classical temporal reasoning frameworks. In this paper, we propose a framework based on a fuzzification of Allen’s Interval Algebra to cope with these issues. By using simple heuristic techniques to extract temporal information from web documents, we initially focus more on recall than on precision, relying on the subsequent application of a fuzzy temporal reasoner to improve the reliability of the extracted information, and to deal with conflicts that arise because of the vagueness of events. Experimental results indicate that a consistent and reliable knowledge base of fuzzy temporal relations can thus be obtained, which effectively allows us to target temporally constrained retrieval tasks.     

Intuitionistic fuzzy rough sets: at the crossroads of imperfect knowledge

Abstract: Just like rough set theory, fuzzy set theory addresses the topic of dealing with imperfect knowledge. Recent investigations have shown how both theories can be combined into a more flexible, more expressive framework for modelling and processing incomplete information in information systems. At the same time, intuitionistic fuzzy sets have been proposed as an attractive extension of fuzzy sets, enriching the latter with extra features to represent uncertainty (on top of vagueness). Unfortunately, the various tentative definitions of the concept of an ‘intuitionistic fuzzy rough set’ that were raised in their wake are a far cry from the original objectives of rough set theory. We intend to fill an obvious gap by introducing a new definition of intuitionistic fuzzy rough sets, as the most natural generalization of Pawlak's original concept of rough sets.     

Diffusion-limited evaporation of thin polar liquid films

The stability of evaporating very thin films of a polar liquid is investigated. The microscopic interaction with the substrate and capillarity are taken into account in a lubrication equation. The stability of a flat interface is studied when evaporation is limited by the diffusion of the vapour in the gas phase. The evaporation rate is computed and evaporation is shown to be stabilizing. A stability phase diagram is obtained. A weakly nonlinear analysis leads to a film-thickness amplitude equation that is non local in space. Physical consequences of the results are eventually discussed.     

Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications

The integration of nanotechnology into three‐dimensional printing (3DP) offers huge potential and opportunities for the manufacturing of 3D engineered materials exhibiting optimized properties and multifunctionality. The literature relating to different 3DP techniques used to fabricate 3D structures at the macro‐ and microscale made of nanocomposite materials is reviewed here. The current state‐of‐the‐art fabrication methods, their main characteristics (e.g., resolutions, advantages, limitations), the process parameters, and materials requirements are discussed. A comprehensive review is carried out on the use of metal‐ and carbon‐based nanomaterials incorporated into polymers or hydrogels for the manufacturing of 3D structures, mostly at the microscale, using different 3D‐printing techniques. Several methods, including but not limited to micro‐stereolithography, extrusion‐based direct‐write technologies, inkjet‐printing techniques, and popular powder‐bed technology, are discussed. Various examples of 3D nanocomposite macro‐ and microstructures manufactured using different 3D‐printing technologies for a wide range of domains such as microelectromechanical systems (MEMS), lab‐on‐a‐chip, microfluidics, engineered materials and composites, microelectronics, tissue engineering, and biosystems are reviewed. Parallel advances on materials and techniques are still required in order to employ the full potential of 3D printing of multifunctional nanocomposites.     

Survey of 1012 moldy dwellings by culture fungal analysis: Threshold proposal for asthmatic patient management

Different countries have tried to define guidelines to quantify what levels of fungi are considered as inappropriate for housing. This retrospective study analyzes indoor fungi by cultures of airborne samples from 1012 dwellings. Altogether, 908 patients suffering from rhinitis, conjunctivitis, and asthma were compared to 104 controls free of allergies. Portuguese decree law no 118/2013 (PDL118), ANSES (a French environmental and health agency) recommendations, and health regulations of Besançon University Hospital were applied to determine the rates of non‐conforming dwellings, which were respectively 55.2%, 5.2%, and 19%. Environmental microbiological results and medical data were compared. The whole number of colonies per cubic meter of air was correlated with asthma (P < 0.001) and rhinitis (P = 0.002). Sixty‐seven genera and species were detected in bedrooms. Asthma was correlated to Aspergillus versicolor (P = 0.004) and Cladosporium spp. (P = 0.02). Thresholds of 300 cfu/m³ for A. versicolor or 495 cfu/m³ for Cladosporium spp. are able to discriminate 90% of the asthmatic dwellings. We propose a new protocol to obtain an optimal cost for indoor fungi surveys, excluding surface analyses, and a new guideline to interpret the results based on >1000 cfu/m³ of whole colonies and/or above threshold levels for A. versicolor or Cladosporium spp.