Optimizing the Runoff Estimation with HEC-HMS Model Using Spatial Evapotranspiration by the SEBS Model

Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m³/s (R²?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m³/s (R²?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m³ runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.

     

Fuzzy reliability analysis of nanocomposite ZnO beams using hybrid analytical-intelligent method

A hybrid analytical-intelligent approach is proposed for fuzzy reliability analysis of the composite beams reinforced by zinc oxide (ZnO) nanoparticle. The fuzzy reliability index corresponding to buckling failure mode of nanocomposite beam under thickness-direction external voltage is computed based on three-levels: (1) fuzzy analysis, (2) reliability analysis and (3) analytical buckling analysis. In fuzzy analysis level, an improved gravitational search algorithm has been applied to determine uncertainty interval for membership levels of reliability index. The adaptive formulation with a dynamical self-adjusting process is used for reliability analysis level based on conjugate first-order reliability method (FORM). The self-adjusting term in conjugate sensitivity vector is used to satisfy the sufficient descent condition for controlling instability of FORM formula while the proposed conjugate scalar factor is computed less than the original conjugate FORM, thus it may be provided with the efficient results for the convex problem. The new and previous sensitivity vectors obtained by conjugate and steepest descent vectors dynamically adjusted the proposed conjugate factor. In the buckling analysis level, an exponential theory in conjunction with the method of energy is utilized. Fuzzy random variables including applied voltage, the volume fraction of ZnO, thickness of beam, spring constant and shear constant of the foundation are considered in studied nanocomposite beam. Survey results indicated that the proposed method can provide stable and acceptable fuzzy membership functions for parametric study. Moreover, the ratio of length to thickness and spring constant of foundation are the more sensitive parameters which affect fuzzy reliability index significantly.

     

Condensation–cyclization reaction for one-pot synthesis of 1,3-thiazolidin-4-one derivatives by poly(p-phenylenediamine) grafted on LDHs as a catalyst with green tool

The three-component reaction between amine, carbonyl compound and thioglycolic acid is now considered as a major strategy for synthesis of 1,3-thiazolidin-4-ones, which consists of the following steps: (i) condensation of aldehyde and amine which results the formation of an imine; (ii) the reaction between thioglycolic acid and the imine which is followed by an intramolecular cyclization reaction, which leads to the formation of the final product. In this way, if no suitable catalyst is employed, the completion of the reaction will not be achieved. Hence, it is of great importance to select an appropriate catalyst so that these compounds can be successfully synthesized. Herein, we employed LDHs@PpPDA as a versatile catalyst for the fabrication of novel derivatives of 1,3-thiazolidin-4-one.     

An analytical framework for event mining in video data

With the high availability of digital video contents on the internet, users need more assistance to access digital videos. Various researches have been done about video summarization and semantic video analysis to help to satisfy these needs. These works are developing condensed versions of a full length video stream through the identification of the most important and pertinent content within the stream. Most of the existing works in these areas are mainly focused on event mining. Event mining from video streams improves the accessibility and reusability of large media collections, and it has been an active area of research with notable recent progress. Event mining includes a wide range of multimedia domains such as surveillance, meetings, broadcast, news, sports, documentary, and films, as well as personal and online media collections. Due to the variety and plenty of Event mining techniques, in this paper we suggest an analytical framework to classify event mining techniques and to evaluate them based on important functional measures. This framework could lead to empirical and technical comparison of event mining methods and development of more efficient structures at future.     

Use of surface modified recycled rubber particles for toughening of epoxy polymers

The objective of this research is to investigate the feasibility of using surface treated recycled rubber particles for toughening of epoxy polymers. These particles are obtained through grinding of scrap tires followed by oxidizing the surface of the particles in a reactive gas atmosphere. Surface treated recycled rubber particles with a nominal particle size of approximately 75 μm and a commonly used reactive liquid elastomer, CTBN, have been incorporated in a DGEBA epoxy resin. It has been shown that the recycled rubber particles are not as effective as CTBN in toughening of the epoxy matrix. However, blending of the two modifiers results in a synergistic toughening. Microscopy reveals that, when used alone, recycled rubber particles simply act as large stress concentrators and modestly contribute to toughening via crack deflection and microcracking. In the presence of micron size CTBN particles, which cavitate and induce massive shear yielding in the matrix, however, the recycled particles “stretch” the plastic deformation to distances far from the crack tip. This mechanism causes plastic zone branching and provides an unexpectedly high fracture toughness value. This study, therefore, provides a practical approach for manufacturing engineering polymer blends utilizing the surface modified recycled rubber particles.     

A new image encryption scheme with Feistel like structure using chaotic S-box and Rubik cube based P-box

Multimedia Tools and Applications - In this paper, a novel chaos-based dynamic encryption scheme with a permutation-substitution structure is presented. The S-boxes and P-boxes of the scheme are...     

A Multi-Criteria Group Decision Making Methodology Using Interval Type-2 Fuzzy Sets: Application to Water Resources Management

In this paper, a new fuzzy group decision-making methodology which determines and incorporates negotiation powers of decision makers is developed. The proposed method is based on a combination of interval type-2 fuzzy sets and a multi-criteria decision making (MCDM) model, namely TOPSIS. To examine the applicability of the proposed methodology, it is used for finding the best scenario of allocating water and reclaimed wastewater to domestic, agricultural, and industrial water sectors and restoring groundwater quantity and quality in the Varamin region located in Tehran metropolitan area in Iran. The results show that the selected scenario leads to an acceptable groundwater conservation level during a long-term planning horizon. Although the capital cost of this scenario is high, which leads to groundwater restoration during the 34-year planning horizon, it is determined as the best allocation scenario. This scenario also entails the second least pumping cost, due to less water allocation from the groundwater. To evaluate the results of the proposed methodology, they are compared with those obtained using some well-known interval type-2 decision-making approaches including arithmetic-based, TOPSIS-based, and likelihood-based comparison methods. The Spearman correlation coefficient shows that the obtained results generally concur with those of the other methods. It is also concluded that the proposed methodology gives more reasonable results by calculating and considering the negotiation powers of decision makers in an extended TOPSIS-based group decision-making model.

     

Preparation and characterization of poly(vinyl alcohol)/gum tragacanth/cellulose nanocomposite film

The effects of gum tragacanth obtained from two species of Astragalus Gossypinus (GT-G) and A. Parrowianus (GT-P) at two levels of 10% and 30% combined with cellulose nanofibers (CNF; 5%) on the physico-mechanical and structural properties of polyvinyl alcohol (PVA) nanocomposite film were investigated in this study. The water solubility and water vapor permeability of the films decreased with increasing the content of both gums, especially in the film containing 30% GT-P. The highest values of the tensile strength (39.3 MPa) and elongation at break (445%) belonged to the treatment containing 10% GT-P (90/10P/0). The FTIR and DSC analyses confirmed good interactions between GT and PVA in the 90/10P/0 treatment. SEM images indicated the dense structure of this film as the optimum treatment. Although the presence of CNF in the films containing GT-G improved some properties, especially the Young modulus, it impaired all the functional properties of nanocomposite GT-P film.     

Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.