The evaluation of speckle contrast with variable speckle generator

Abstract— While laser projection has many advantages, there is a problem with speckle patterns generated as a result of interference of the laser beam and results in bad effects to observers. In 2010, a variable speckle generator, which produces an angular shift of incident light to the screen and generates variable speckle patterns, was suggested. In this study, the performance of a variable speckle generator by using a volume phase holographic beam shaper and scanning mirror was investigated in detail by evaluating both the objective and subjective speckle contrast. The morphology of the speckle pattern was also investigated when the variable speckle generator was activated. With a scanning VPH beam shaper, the objective speckle was effectively reduced because each point of the VPH beam shaper generated different speckle patterns and coherency among each pattern disappeared by using the scan process. On the other hand, subjective speckle was also dramatically reduced by changing the incident angle on the screen, which resulted in generating variable subjective speckle. It was also shown that the speckle reduction rate by using a variable speckle generator did not depend on the coherent length of a laser by evaluating the normalized speckle contrast against the angular shift on the screen.     

Analysis of Economic Incentive Policies for Improving a Low Carbon Society—Case Study of the Building Industry in China and Japan

In the process of promoting the development of a low carbon society, economic incentive policies play an important role. In order to see the effectiveness of implementing the economic incentive policies, we put forward two questions in this study: How effective are economic incentive policies in the building industry in China and Japan? What are the obstacles preventing these policies from being effectively applied and how to overcome them? Considering the energy consumption in the building industry accounts for a significant proportion in both China and Japan, economic incentive policies for promoting building energy saving in the two countries have been chosen as case studies. Policies discussed in this article are divided into national and city levels, in which the city level policy analysis mainly focused on the active Carbon Trading Programs. Methods of stakeholder investigation and literature review are applied in exploring the economic incentive polices' effects and constraints. Based on the outcomes of our research, policy recommendations for overcoming the barriers of economic incentive policies in the building industry are worked out.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Image blurring of thick specimens due to MeV transmission electron scattering: a Monte Carlo study

Image blurring of MeV transmission electrons for gold nanoparticles on the top surface of micrometer-thick specimens has been investigated using the Monte Carlo simulation. Both the simulated line density profile and therefore image blurring were in good agreement with the experimental ones in the ultrahigh voltage electron microscope. Quantitative effects of specimen thickness and electron energy on image blurring were presented, in which the specimen thickness had a greater influence. Image blurring was demonstrated to be caused mainly by multiple elastic scattering, but it could be reduced to several nanometers for a 5?μm thick epoxy-resin specimen at the electron energy of 2?MeV.     

Endothelin-1 secretion from cultured vascular endothelial cells of DOCA-salt hypertensive rats

The profile of endothelin-1 (ET-1) release from cultured vascular endothelial cells (ECs) obtained from deoxycorticosterone acetate (DOCA)-salt hypertensive rats, was examined and compared with that from normotensive sham rats. ET-1 release from ECs was increased in a time-dependent manner, and the level of DOCA-salt hypertensive rats was higher than that of sham rats. Incubation of ECs with transforming growth factor (TGF)-beta 1 or thrombin resulted in a significant increase in the ET-1 release, while FK409, a novel nitric oxide donor, produced a dose-dependent decrease in the release. In the case of ECs from DOCA-salt hypertensive rats, the potencies of TGF-beta 1- or thrombin-induced action was much less than that seen with sham rats, while the difference of reactivity to FK409 was not observed between ECs of DOCA-salt rats and sham rats. Thus, ET-1 production in ECs appears to be up-regulated in DOCA-salt hypertensive rats. In addition, there seems to be an abnormalities in the signaling pathway via TGF-beta 1- or thrombin-induced enhancement of ET-1 production in ECs of DOCA-salt hypertensive rats.     

Influence of the image quality deterioration of a tilted thick specimen on electron tomography

In electron tomography (ET) based on a transmission electron microscope, the effective thickness of a specimen increases with the tilt angle and, therefore, the projection quality may deteriorate because of electron scattering. The information-missing region, however, can be reduced by broadening the specimen tilt range. To clarify the general influence of these effects on ET, the projection quality varying with the tilt angle was quantitatively evaluated for a 5-microm thick specimen observed with a 3 MV ultrahigh-voltage electron microscope. Simulations of three-dimensional reconstruction were then performed for different specimen thicknesses and tilt ranges. As a result, the ET accuracy was shown to decrease as the specimen thickness increased. However, an optimum specimen-tilt range, at which ET could reach its highest accuracy, was found to exist and become small with the increase of the specimen thickness. The presented results are helpful for determining the specimen thickness limitation on the ET resolution and improving the ET fidelity of thick specimens.     

Solving shortest paths efficiently on nearly acyclic directed graphs

Shortest path problems can be solved very efficiently when a directed graph is nearly acyclic. Earlier results defined a graph decomposition, now called the 1-dominator set, which consists of a unique collection of acyclic structures with each single acyclic structure dominated by a single associated trigger vertex. In this framework, a specialised shortest path algorithm only spends delete-min operations on trigger vertices, thereby making the computation of shortest paths through non-trigger vertices easier. A previously presented algorithm computed the 1-dominator set in O(mn) worst-case time, which allowed it to be integrated as part of an O(mn+nrlogr) time all-pairs algorithm. Here m and n respectively denote the number of edges and vertices in the graph, while r denotes the number of trigger vertices. A new algorithm presented in this paper computes the 1-dominator set in just O(m) time. This can be integrated as part of the O(m+rlogr) time spent solving single-source, improving on the value of r obtained by the earlier tree-decomposition single-source algorithm. In addition, a new bidirectional form of 1-dominator set is presented, which further improves the value of r by defining acyclic structures in both directions over edges in the graph. The bidirectional 1-dominator set can similarly be computed in O(m) time and included as part of the O(m+rlogr) time spent computing single-source. This paper also presents a new all-pairs algorithm under the more general framework where r is defined as the size of any predetermined feedback vertex set of the graph, improving the previous all-pairs time complexity from O(mn+nr²) to O(mn+r³).     

Emission of Particulate Matter 2.5 (PM2.5) from Sewage Sludge Incinerators in Japan

Because fine particulate matter ≤2.5 µm in diameter (PM2.5) causes health problems, PM2.5 emissions are of concern. However, little research on stationary sources has been conducted. To determine the concentration and filtration behavior of PM2.5, dust was collected from five fluid-bed sewage sludge incinerators (SSIs) sorted by particle size using cascade impactors. The average PM2.5 concentration was 0.00014–4.8 mg/Nm³. The total estimated amount of PM2.5 emissions from the SSIs for all plants in Japan was 0.96–8.9 tons/year. Since the SSIs with dry Electrostatic Precipitators (EP) contributed 75–99% of the total emissions, replacing dry EPs with bag filters would significantly reduce the PM2.5 emissions from SSI.     

Flow impact of an air conditioner to portable air cleaning

In order to reduce indoor pollutant exposure, people become increasingly interested in portable air cleaning devices, which can be positioned with flexibility. Such purification devices usually discharge cleaned air with strong momentum, which can interrupt indoor airflow created by air-conditioning units. If a well-organized air circulation to a portable air cleaner is not achieved, indoor air purification cannot be fully ensured. This study has used both measurement and computational fluid dynamics (CFD) modeling to investigate the flow interaction between an air conditioner and a portable air cleaner to purify indoor gaseous pollutants. A workshop environment conditioned by an air conditioner and cleaned by a portable air cleaner was mimicked in an environmental chamber to obtain data for validation of a CFD program. Then CFD was applied to evaluate factors that may affect air purification including: positioning of the air conditioner and air cleaner, air conditioner diffuser types, air-conditioning cooling or heating running mode, and location of pollutant sources. The study finds the simulation results are in good agreement with the corresponding experimental data. The positioning coordination of an air conditioner and an air cleaner, and selection of air conditioner diffuser types shall assure a good air circulation cycle to the air cleaner to improve air purification efficacy. In addition to the cleaner effectiveness, it is also recommended to evaluate an air cleaning device in terms of the absolute pollutant concentration, if the portable air cleaner is under the interaction of an air conditioner and the local performance data are interested.