Effect of Moving Speed of Charged Metallic Spherical Electrode on Electrostatic Discharge

In this investigation, the nature of the electrostatic discharge (ESD) that occurs when a charged object moves toward a stationary grounded object is experimentally clarified. The spark lengths, discharge currents, and induced voltages in a magnetic probe were measured when a charged metallic spherical electrode connected to a 422 pF capacitor approached a stationary grounded object, which was the current target, for different moving speeds of the charged metallic spherical electrode in a range of 1 mm/s to 100 mm/s. The charge voltages of the capacitor were +6.5 kV and +10 kV. Based on the results, the average gap length shortened with the speed of the spherical electrode. The average peak values of the discharge current and the induced voltage were likely to increase with the speed of the spherical electrode. The average rise times of the discharge current and the induced voltage were likely to drop with the speed of the spherical electrode. The relation between the spark length and the discharge current due to the ESD can be explained qualitatively by using an equation derived from the spark resistance formula proposed by Rompe and Weizel.     

超低失真多层陶瓷电容相较于薄膜电容的优势

在滤波应用中,超低失真的表面贴装多层陶瓷电容(MLCC),已经成为模拟电路设计者在SMD塑料薄膜(薄膜片式)电容之外的另一种选择,它的体积更小、成本更低、也更为可靠。这些潜在的模拟电路应用实例包括:音响设备、无线设备、锁相环(PLL)和通信设备(如调制/解调器)等。这些新型电容的等效串连电阻(ESR)极低,因此非常适合于高效率的DC/DC变换器和高速微处理器应用。低失真电容的应用随着处理器速度的提高和工作电压的降低,噪声会给信号完整性带来严重的影响,除非能通过过滤或解耦的办法将其去除。在声频、射频、PLL和通信电路中,跟踪误差…     

Non-axisymmetric buckling behaviour of elastic-plastic circular tubes subjected to a nosing operation

Theoretical investigations have been carried out to predict the non-axisymmetric buckling seen in the throat of circular elastic-plastic tubes subjected to a nosing operation along a frictionless conically shaped die. The buckling points and associated modes are determined by Hill's bifurcation theory in conjunction with a non-axisymmetric buckling mode. The results show that increasing the die semi-angle and the tube thickness or decreasing the material work-hardening rate are always beneficial to improve the buckling limit. The associated critical buckling mode number generally decreases as the tube thickness increases and does not depend drastically on the die semiangle nor on the hardening rate. The effect of the average r value is substantial and the buckling limit is improved when the r value reduces. Part of the present results predict well the results observed in existing experimental work.     

Characteristics of thermally expanded core fiber

Thermally expanded core (TEC) fiber is expected to reduce fiber-to-fiber and fiber-to-laser diode connection loss. This paper describes the characteristics of TEC fiber theoretically and experimentally. We reveal theoretically that when fabricating TEC fiber the mode field diameter (MFD) is enlarged more effectively by increasing the heating temperature rather than the heating time. In the 1300-1600°C temperature range with heating times between 0 and 60 min, it is necessary to control the temperature accurately so that no deviation from the target temperature is more than ±30°C. This is in order to ensure that any connection loss caused by MFD mismatch is less than 0.1 dB. We show experimentally that the propagation loss of TEC fiber is dependent on the heating region and wavelength by using a micro burner with a propane/oxygen flame. Based on the relationship between the loss characteristics and the expanded MFD, we suggest a method for nondestructively measuring the MFD in TEC fibers     

Abnormal development and differentiation of macrophages and dendritic cells in viable motheaten mutant mice deficient in haematopoietic cell phosphatase

In mice homozygous for the 'viable motheaten' (mev) mutation, numbers of macrophage progenitor cells, particularly monocytes, were markedly increased in the bone marrow and spleen. Increased mobilization of these precursor cells to peripheral tissues and their differentiation to macrophages were evidenced by striking increases in macrophage numbers. Immunohistochemical double staining of tissue sections and flow cytometry analyses of single cell suspensions from these mice demonstrated CD5 (Ly-1)-positive macrophages in the peritoneal cavity, spleen and other tissues. Ly-1-positive macrophage precursor cells were demonstrated in the peritoneal cavity of the mev mice and developed in the omental milky spots. The development of marginal metallophilic and marginal zone macrophages was poor in the splenic white pulp and related macrophage populations were absent in the other lymphoid tissues. The numbers of epidermal Langerhans cells in the skin and T cell-associated dendritic cells in the thymic medulla, lymph nodes, and the other peripheral lymphoid tissues were decreased. However, increased numbers of dendritic cells accumulated in the lungs, liver, and kidneys. These abnormalities in development and differentiation of macrophages and dendritic cells may be ascribed to the deficiency in haematopoietic cell SHP-1 tyrosine phosphatase or may be a secondary consequence of abnormal microenvironments, (either constitutive or in response to inflammatory stimuli) in the haematopoietic and lymphopoietic organs and tissues of these mice.     

Epidermodysplasia verruciformis accompanied by familial large granular lymphocytosis and a decrease in T lymphocytes

A 40-year-old man with epidermodysplasia verruciformis showed a decrease in peripheral blood T cells and abnormal expansion of large granular lymphocytes, accompanied by increased natural killer cell activity. Surface marker analysis of his large granular lymphocytes demonstrated that the subset, CD 57+ and CD 16+, had increased. His father, who had no skin lesions of epidermodysplasia verruciformis, displayed similar blood changes and his brother showed a decrease in T cells and a slight increase in CD 16+ natural killer cells, whereas his mother revealed only a slight decrease in T cells. Our present study indicates that epidermodysplasia verruciformis might be associated with hereditary abnormal expansion of large granular lymphocytes and a decrease in T cells.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

Growth condition of iodine-doped n+-CdTe layers in metal-organic vapor phase epitaxy

Iodine doping of CdTe layers grown on (100) GaAs by metal-organic vapor phase epitaxy (MOVPE) was studied using diethyltelluride (DETe) and diisopropyltelluride (DiPTe) as tellurium precursors and ethyliodine (EI) as a dopant. Electron densities of doped layers increased gradually with decreasing the growth temperature from 425°C to 325°C. Doped layers grown with DETe had higher electron densities than those grown with DiPTe. When the hot-wall temperature was increased from 200°C to 250°C at the growth temperature of 325°C, doped layers grown with DETe showed an increase of the electron density from 3.7×10¹⁶ cm⁻³ to 2.6×10¹⁸ cm⁻³. On the other hand, such an increase of the electron density was not observed for layers grown with DiPTe. The mechanisms for different doping properties for DETe and DiPTe were studied on the basis of the growth characteristics for these precursors. Higher thermal stability of DETe than that of DiPTe was considered to cause the difference of doping properties. With increasing the hot-wall temperature from 200°C to 250°C, the effective ratio of Cd to Te species on the growth surface became larger for layers grown with DETe than those grown with DiPTe. This was considered to decrease the compensation of doped iodine and to increase the electron density of layers grown with DETe. The effective ratio of Cd to Te species on the growth surface also increased with decreasing growth temperature. This was considered to increase the electron density with decreasing growth temperature.     

Effects of Digital Doping of Mn on Giant Magneto-Optical Properties of Zn1−x Mn x Se Quantum Wells

We have studied effects of the digital-doping profile of MnSe layers on the giant magneto-optical properties in Zn_1?x Mn _x Se-based quantum wells. The giant Zeeman shift energy increases monotonically with increasing spatial overlap of the exciton wavefunction with the 0.5 monatomic-thick effective Mn layers at the interfaces between the digitally doped MnSe layers and nonmagnetic ZnSe layers. Also, a field-induced enhancement factor of the excitonic photoluminescence intensity, because of the suppression of the exciton energy transfer into the d-d transition of Mn-ions, increases linearly with increasing such overlap of the exciton wavefunction with the effective Mn layer. In addition, the formation energy as large as 18.6 meV and the formation time of the magnetic polaron are determined, which are also affected by the digital-doping profile.     

Tyrosine phosphorylation as a convergent pathway of heterotrimeric G protein- and rho protein-mediated Ca2+ sensitization of smooth muscle of rabbit mesenteric artery

1. The aim of this study was to determine whether different signal transduction mechanisms underlie the Ca2+ sensitizing effects of guanosine 5'-O-(3-thiotriphosphate) (GTP(gamma)S) and receptor agonists on beta-escin-skinned smooth muscle of rabbit mesenteric artery. 2. In the homogenate of the beta-escin-skinned arterial strip, C3 exoenzyme of Clostridium botulinum catalyzed the [32P]-ADP-ribosylation of only one protein that had the same molecular mass as the protein detected in Western blots with anti-rho p21 antibody. Pretreatment of preparations with C3 resulted in great inhibition of GTP(gamma)S-induced Ca2+ sensitization, although the effect of GTP(gamma)S at higher concentrations (> or = 30 microM) was not completely blocked by this treatment. In contrast, the enhancement by phenylephrine and histamine, in the presence of guanosine 5'-triphosphate, of the Ca2+-induced contraction was not affected by C3 pretreatment. 3. The protein kinase C (PKC) inhibitors calphostin C and staurosporine completely eliminated the enhancement by phorbol ester 12,13-dibutyrate of the Ca2+-induced contraction. However, these PKC inhibitors had no effect on GTP(gamma)S- and receptor agonist-induced Ca2+ sensitization. 4. The tyrosine kinase inhibitors genistein and tyrphostin 25 caused an irreversible and complete block of the enhancement by GTP(gamma)S of the Ca2+-induced contraction without affecting this Ca2+ contraction. The inactive genistein analogue daidzein did not modify the effect of GTP(gamma)S. The Ca2+ sensitizing effects of phenylephrine and histamine were also blocked by these tyrosine kinase inhibitors. 5. These results suggest that rho p21 predominantly mediates GTP(gamma)S-induced Ca2+ sensitization of beta-escin-skinned smooth muscle of rabbit mesenteric artery, while the Ca2+ sensitizing actions of heterotrimeric G protein-coupled receptor agonists do not involve this small G protein. However, it seems that tyrosine phosphorylation, but not PKC activation, plays an important role in both of the rho p21 protein- and heterotrimeric G protein-mediated Ca2+ sensitization mechanisms.