Breakdown characteristics of oil and paper insulation for a very fast transient voltage

This paper describes the dielectric breakdown characteristics of oil and oil‐impregnated paper for very fast transient (VFT) voltages. Blumlein circuits generate VFT voltages of 60 and 300 ns in a pulse width that simulates disconnecting switching surges in gas‐insulated switch gears. We measured the breakdown voltages of needle‐to‐plane, plane‐to‐plane oil gaps and several pieces of paper between plane electrodes for VFT and lightning impulse voltages. The measured data were formulated in V‐t characteristics and Weibull probability distributions. The inclination n of V‐t characteristics of insulating paper is 150, which is less than n = 13.7 of the plane‐to‐plane oil gap in the VFT time range. The shape parameters of Weibull distribution obtained in this study show that the scattering of breakdown voltages of paper is much less than that of oil. © 2002 Wiley Periodicals, Inc. Electr Eng Jpn, 141(4): 16–24, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.10043     

TRVs and fault clearing stresses in extra-high-voltage radial networks

To cope with the high rate of increase of power demand in the main industrialized districts in Japan, 550-kV transmission systems covering the districts have been reinforced, with most of the main power plants connected directly to these systems. Through 550-/300-kV substations, the majority of power to the districts is supplied by 300-kV systems. To limit the excess short-circuit capacity in the 300-kV systems, they tend to be reconstructed as so-called radial networks. In radial networks with high short-circuit capacity and relatively small number of transmission lines connected to the substation busbars, the rate of rise of TRV can be far higher than standard value. This paper analyzes the transient recovery voltages (TRV) in such extra-high-voltage radial networks in Japan, together with the relevant stresses to circuit-breakers during fault clearings. Future system conditions have also been introduced. As the typical rate of rise of the TRV values, more than twice that of today's standard ones are probable.     

Robust stabilization of a magnetic suspension system using H∞ Control Theory

This paper presents the robust control design of a magnetic suspension system for a flexible beam which is a simplified model of an elastic rotor in a magnetic bearing system. To stabilize this magnetic suspension system which is unstable in nature, the H^infin; control theory is applied for a design of the control system. To apply the H^infin; control theory, a statespace model of an augmented plant with frequency-weighting functions is constructed. This augmented plant has two inputs which are the exogenous inputs and the control inputs, and two outputs which are the sensor outputs and the regulated outputs. Here we consider the mixed sensitivity problem. The H^infin; controller is implemented by a digital controller which is able to execute the computations very quickly. For the evaluation of the control performance, several experiments are made. The robustness of the closed-loop system is confirmed by the experimental results. The result of this study is useful for the control design of a magnetic bearing system.     

A probabilistic simulator for population dynamics of quasispecies

We constructed a probabilistic simulator that allows all the events in population dynamics such as death, birth, mutation, and suppression/stimulation to be described by probabilistic rules. The simulator also facilitates a lattice used for expressing distribution and diversity (number of distinct strains) of quasispecies. The simulator is used to investigate the diversity threshold in HIV and T-cell interaction. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

Characteristics and classification of high-current fault arcs on distribution systems

When a fault occurs on transmission or distribution systems due to lightning or overvoltage, often an arc discharge occurs at the fault point. The arc discharge, which is caused by a fault current, has a high current, high temperature, strong light emission, etc., thus it sometimes causes heavy damages to electric power equipment. The arc discharge is influenced by the conditions around the arcs, i.e., gas, insulation materials, gap length, weather, etc. Also, the arc voltage along the arc column indicates the characteristics of the arc. If the voltage waveforms of the arcs caused by the fault on transmission or distribution systems are classified, it is possible to find the location and the equipment where the fault occurred. In this paper, the arc voltage data in 6-kV class XLPE cables and 6-kV class overhead lines are analyzed and an artificial neural network method is applied to classify the arc voltage waveforms. The results obtained from the six artificial neural networks developed show that the artificial neural network method is effective for classification of arc voltage waveforms if adequate input parameters are selected.     

Dehydration of Gels and Glasses in the Systems B2 O3-SiO2 and ZrO2-SiO2 Prepared by the Sol-Gel Process from Metal Alkoxides

Dehydration of gels prepared by the sol-gel process from metal alkoxides in the systems B₂O₃-SiO₂ and ZrO₂-SiO₂ was determined by measuring the shrinkage of the gel on heating. Dehydration was enhanced with increased ZrO₂ content, whereas it decreased with B₂O₃ content. Diffusion of water was also measured in the nonporous glasses obtained by heating the gels. The diffusion rate was independent of the composition of the glass.     

Local disturbances preceding a running crack front in a viscoelastic solid

The local disturbances ahead of a running crack front in a viscoelastic solid were measured through noncontact electro-optical tools. It was observed that the very high local strain rate up to 200/sec exists even in the present quasistatic loading case. It may be concluded that the running crack propagation velocities, not the conventional average strain rates ranging from about 10^?4/sec to 10^?2/sec, govern the local disturbances, as the crack propagation velocities always exceed 200m/sec for both average strain rates, while the local strain rates observed do not show much differences between both average strain rate cases.     

Aggregation arrestant pheromone of the German cockroach,Blattella germanica (L.) (Dictyoptera: Blattellidae): Isolation and structure elucidation of blattellastanoside-A and -B

The aggregation pheromone of the German cockroach,Blattella germanica, consists of attractant and arrestant, which can be detected by olfactometer and choice-chamber assay, respectively. Both were extracted from the frass-contaminated filter paper being used as a shelter. They were separated by solvent partition withn-butanol and water. The arrestant from then-butanol phase was purified by open column chromatography and then successive HPLC isolated two major arrestant components. Spectral evidence from SI-MS, HR-EI-MS, and NMR experiments with pulse techniques provided possible structures as 1-(6-chloro-4,5-epoxy-5-stigmast-3-yl)--d-glucopyranoside and 1-(6-chloro-5-hydroxy-5-stigmast-3-yl)--d-glu-copyranoside, denoted as blattellastanoside-A and blattellastanoside-B, respectively. They represented arrestant activity as median effective doses (ED₅₀) at 0.044 (A) and 3.2 (B) nmol on 1.0 cm² of Whatman No. 1 filter paper.     

Efficient Leave-<Emphasis Type="Italic">m</Emphasis>-out Cross-Validation of Support Vector Regression by Generalizing Decremental Algorithm

We propose a computationally efficient method for cross-validation of the Support Vector Regression (SVR) by generalizing the decremental algorithm of SVR. Incremental and decremental algorithm of Support Vector Machines (SVM) ^{2, 8, 9)} efficiently update the trained SVM model when a single data point is added to or removed from the training set. The computational cost of leave-one-out cross-validation can be reduced using the decremental algorithm. However, when we perform leave-m-out cross-validation (m > 1), we have to repeatedly apply the decremental algorithm for each data point. In this paper, we extend the decremental algorithm of SVR^{8, 9)} in such a way that several data points can be removed more efficiently. Experimental results indicate that the proposed approach can reduce the computational cost. In particular, we observed that the number of breakpoints, which is the main computational cost of the involved path-following, were reduced from \({\mathcal O}(m)\) to \({\mathcal O}(\sqrt{m})\).