Infiltration and Top Seed Growth-Textured YBCO Bulks With Multiple Holes

The recently reported hole-patterned YBa₂Cu₃O _y (Y123) bulks with improved superconducting properties are highly interesting from material quality and application variety points of view. It is well known that the core of plain bulk superconductors needs to be fully oxygenated and some defects like cracks, pores, and voids must be suppressed in order that the material can trap a high magnetic field or carry a high current density. To minimize the above defects, we have used a combination of standard superconducting ceramic processing and an infiltration technique to prepare regularly perforated YBa₂Cu₃O _y (Y123) bulk superconductors. This process leads to negligible shrinkage upon annealing and a uniform distribution of Y211 inclusions. Texture was evidenced by neutron pole figure measurements. Flux mapping was used to verify the superconducting homogeneity of the samples and to investigate the field-trapping ability. In addition, the textured drilled samples were reinforced using resin or metal impregnation and the influence of the different processing steps on the hardness of the materials has been investigated.     

Miscibility and morphology of poly(vinylidene fluoride)/poly[(vinylidene fluoride)‐ran‐trifluorethylene] blends

This study presents an investigation of the effect of the different crystalline phases of each blend component on miscibility when blending poly(vinylidene fluoride) (PVDF) and its copolymer poly[(vinylidene fluoride)‐ran‐trifluorethylene] [P(VDF–TrFE)] containing 72 mol % of VDF. It was found that, when both components crystallized in their ferroelectric phase, the PVDF showed a strong effect on the crystallinity and phase‐transition temperature of the copolymer, indicating partial miscibility in the crystalline state. On the other hand, immiscibility was observed when both components, after melting, were crystallized in their paraelectric phase. In this case, however, a decrease in crystallization temperatures suggested a strong interaction between monomers in the liquid state. Blend morphologies indicated that, in spite of the lack of miscibility in the crystalline state, there is at least miscibility between PVDF and P(VDF–TrFE) in the liquid state, and that a very intimate mixture of the two phases on the lamellar level can be maintained upon crystallization. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1362–1369, 2002     

Mass transfer in 3D-printed electrolyzers: The importance of inlet effects

This article investigates the effect of inlet shape, entrance length, and turbulence promoters on mass transfer by using 3D-printed electrolyzers. Our results show that the inlet design can promote turbulence and lead to an earlier transition to turbulent flow. The Reynolds number at which the transition occurs can be predicted by the ratio of the cross-sectional area of the inlet to the cross-sectional area of the electrolyzer channel. A longer entrance length results in more laminar behavior and a later transition to turbulent flow. With an entrance length of 550 mm, the inlet design did no longer affect the mass transfer performance significantly. The addition of gyroid type turbulence promoters resulted in a factor of 2 to 4 increase in mass transfer depending on inlet design, entrance length, and the type of promoter. From one configuration to another, there was a minimal variation in pressure drop (<1600 Pa).     

pH sensitive phosphate crosslinked films of starch-carboxymethyl cellulose

This work aims to develop hydrogel films of starch and carboxymethyl cellulose (CMC) crosslinked with sodium trimetaphosphate (STMP) and to characterize some of their properties. Starch and STMP (S/T), starch and CMC (S/C), and mixed (S/T/C) films were prepared by casting. The degree of substitution, morphology, swelling degree, FTIR, mechanical properties, and sorption isotherms were studied. Reticulated samples (S/T and S/T/C) showed the same degree of substitution (0.050 ± 0.001). All films presented homogeneous morphology, but the mixed film showed greater roughness. Crosslinking increased the swelling capacity of the mixed hydrogel at pH 7, although it remained decreased concerning the S/T hydrogel. However, this property was sensitive to pH variations. The mixed film (S/T/C) showed greater mechanical resistance. The casting process was efficient to produce hydrogel films of starch/CMC crosslinked with STMP and the general results demonstrated the advantages of the mixed hydrogel.     

Development of a water-in-oil-in-water multiple emulsion system integrating biomimetic aqueous-core lipid nanodroplets for protein entity stabilization. Part II: process and product characterization

The aqueous-core enclosed in lipid nanoballoons integrating multiple emulsions of the type water-in-oil-in-water mimic, at least in theory, the environment within viable cells, thus being suitable for housing hydrophilic protein entities such as bioactive proteins, peptides and bacteriophage particles. This study reports a complete physicochemical characterization of optimized biomimetic aqueous-core lipid nanoballoons housing hydrophilic (BSA) protein entities, evolved from a statistical 2³×3¹ factorial design study (three variables at two levels and one variable at three levels) that was the subject of the first paper of a series of three, aiming at complete stabilization of the three-dimensional structure of protein entities attempted via housing the said molecular entities within biomimetic aqueous-core lipid nanoballoons integrating a multiple (W/O/W) emulsion. The statistical factorial design followed led to the production of an optimum W/O/W multiple emulsion possessing quite homogeneous particles with an average hydrodynamic size of (186.2?±?2.6) nm and average Zeta potential of (?36.5?±?0.9) mV, and exhibiting a polydispersity index of 0.206?±?0.014. Additionally, the results obtained for the diffusion coefficient of the lipid nanoballoons integrating the optimized W/O/W multiple emulsion were comparable and of the same order of magnitude (10^?12 m² s^?1) as those published by other authors since, typically, diffusion coefficients for molecules range from 10^?10 to 10^?7 m² s^?1, but diffusion coefficients for nanoparticles are typically of the order of magnitude of 10^?12 m² s^?1.     

Leaf and stem micromorphology of Byrsonima sericea DC. by light and scanning electron microscopy

Micromorphological studies were carried out using multiple microscopic techniques on the leaves and stem bark of Byrsonima sericea DC. (Malpighiaceae), a species popularly known as “murici” and used medicinally, in order to identify both qualitative and quantitative features of leaf and stem anatomy and histochemistry as differential parameters to support both the quality control of its ethnodrugs and the taxonomy of the genus. The study was conducted using traditional techniques of plant anatomy, histochemical tests, and the stomatal index (SI). Byrsonima sericea has hypostomatic leaves, anomocytic stomata, and its epidermal walls are anticlinal and straight on the adaxial and curved on the abaxial faces. T‐shaped trichomes were observed mainly on the abaxial surface. The leaf epidermis showed waxes syntopism on both surfaces, with the occurrence of different crystalloid forms on a single phylloplane. The mesophyll is dorsiventral, with 3‐4 collateral vascular bundles. Phenolic compounds, starch, and proteins were identified in the petiole and stem. The SI was 14.5 ± 0.53% (p < .05), but did not showed significant variations. A set of characters were found to be distinctive for the studied species, however, constituting parameters that could be used to separate B. sericea from other species of the genus.     

Development of a simulation model for a three-dimensional wind velocity field using Ténès Algeria as a case study

A mathematical simulation model was developed that can determine the three-dimensional wind velocity field over a complex terrain. The Ténès area in the Valley of Cheliff in Algeria was used as a case study. This region is exposed to south-west circulation that makes it favorable to the use of wind energy. Knowledge of wind fields is crucial for predicting the dispersion of pollutants, for forecasting meteorological weather, for fire spread prediction and in the design and implementation of wind turbines. By means of a mass consistent model, an in-house program was developed to calculate the three-dimensional wind velocity field in the study region. The model was supported by a numerical box in which flow through is allowed for in the upper and lateral boundaries. The bottom boundary through which no flow through occurs was determined by the topographic relief at the surface. From measured wind velocities, observed values were calculated by interpolation-extrapolation. Using an optimization method, the adjusted velocities were obtained from constraints, observed velocities and the continuity equation. The model was verified with wind point data, the relative error did not exceed 6%.     

Short‐term effects in a reduced flow stretch: The case of the Antas River in South Brazil

The building of adduction channels (penstocks) that conduct water from reservoirs to turbines, which are located kilometres from the dam, is becoming common, optimizing the electricity generation in small dams. This design creates a river stretch with reduced discharge between the dam and the powerhouse. This study evaluates the short‐term impacts of the below‐dam decrease in river flow on fish assemblages. Samples were collected in the reduced flow stretch of the Castro Alves Hydropower Plant (Antas River, Rio Grande do Sul, Brazil) before the reservoir started operating (January 2008; mean discharge of 103.7 m³/s) and immediately after operation began (March 2008; mean discharge of 12.4 m³/s). Sampling was conducted in distinct habitats of the reduced flow stretch (slow waters—gillnets, sand beaches—seining nets, structured littoral—electrofishing, and fast waters—cast nets) with a strongly standardized effort. The attributes of the fish assemblages were not negatively affected by the flow reduction in any habitat sampled. However, distinct changes in the spatial structure were observed considering the different types of habitat predominantly used by the species, which represents an entire reorganization of the fish assemblages in the short term. It is fundamental that these short‐term aspects be considered in the licensing of hydropower plants in addition to the long‐term changes.