Critical Shear Stress of Bimodal Sediment in Sand-Gravel Rivers

A new model for the critical shear stress and the transport of graded sediment is presented. The model is based on the size distribution of the bed surface and can be used to compute sediment transport rates in numerical simulations with an active layer model. This model makes a distinction between unimodal and bimodal sediments. It is assumed that all size fractions of unimodal sediments have the same critical shear stress while there is selective transport for the gravel fractions of bimodal sediments. A recently published laboratory transport data set is used to calibrate our model.     

Coding distributive lattices with Edge Firing Games

In this note, we show that any distributive lattice is isomorphic to the set of reachable configurations of an Edge Firing Game. Together with the result of James Propp, saying that the set of reachable configurations of any Edge Firing Game is always a distributive lattice, this shows that the two concepts are equivalent.     

Recovering gallium from residual bayer process liquor

Gallium is normally obtained by direct electrolysis as a by-product from Bayer process residual liquor at an aluminum processing plant. However, to permit any net accumulation of the metal, the gallium concentration must be at least about 0.3 g/l in the liquor. This article describes a continuous process of extraction with organic solvents and rhodamine-B, followed by a re-extraction step into aqueous media. The final product is a solid containing up to 18 wt.% Ga in a solid mixture of hydroxides and oxides of gallium and aluminum. This final product can then be electrolyzed to recover the gallium more efficiently.     

Fluoroelastomers-dependence of relaxation phenomena on composition

The dynamic-mechanical properties of some fluoroelastomers were determined as a function of composition at low frequency (≈ 1 Hz), by means of a free oscillation torsion pendulum, between −180°C and the softening point. Vinylidenefluoride (VDF)-hexafluoropropene (HFP) copolymers of molar composition 0–39% HFP and terpolymers of VDF and HFP with up to 30mol% tetrafluoroethylene (TFE) and a constant VDF to HFP molar ratio of 3.4 were considered. Two relaxation processes typical of the amorphous phase were found. The first, located at about −87°C, is related to local motions and the transition temperature was found to be independent of composition for copolymers, while it depends on TFE molar content for terpolymers. The second is related to the glass transition and the transition temperature depends on the composition. However, for semicrystalline copolymers the double glass transition phenomenon was observed. When crystallinity goes to zero at about 20 mol% HFP, only one transition is observed. It was also found that ordered structures can take place for terpolymers when TFE molar concentration exceeds 20%. The crystal disorder transition of pure PVDF (75°C) is observed also for low HFP concentrations but the transition temperature is strongly reduced. Analogies between the VDF-HFP and E-P systems are also discussed.     

Study of siloxane additives migration to the surface of polyester-(melamine)-polyurethane coatings: Aging effects after ethanol cleaning

This study determines the influences of siloxane flow agents’ migration on the outermost surface composition of clearcoats, before and after ethanol cleaning. This evaluation is undertaken to improve adhesion of pressure-sensitive adhesives (PSAs) on automotive paint systems. Most of the siloxane flow agents segregate from the bulk to the clearcoat outermost surface during curing. These additives can cover until 50% of the surface area but X-ray photoelectron spectroscopy (XPS) and time of flight-secondary ion mass spectrometry (ToF-SIMS) analyses indicate that they can be removed by ethanol cleaning. Composition of the cleaned clearcoats surfaces are similar as the composition of clearcoat formulated without siloxane additives: the polyester-(melamine)-polyurethane network is more detected than before cleaning. However, outermost surface analyses show that several aging weeks increase the siloxane additives segregation. This post-cleaning migration modifies the clearcoat surface composition and cancels the chemical modifications due to the ethanol cleaning. XPS analyses show that silicon concentrations after cleaning and aging are inversely proportional to the initial silicon concentrations measured after curing. It highlights that aging has to be controlled to improve adhesion of PSAs on clearcoats. A second ethanol cleaning on aged clearcoats is not effective to remove these new siloxane additives. Their formulation should be different from the flow agents and it could modify their solubility in ethanol. This result could also indicate that these new siloxane additives are not located on the last molecular layer of surface and they would not be soluble in ethanol.     

Investigation of the biogenetic reaction sequence of cholesterol in rat tissues,through inhibition with AY-9944

An inhibitor of Δ⁷-reductase, AY-9944 (trans-1,4-bis(2-dichlorobenzylaminomethyl cyclohexane dihydrochloride), was used to investigate the last steps of cholesterol formation in brain and liver of adult and newborn rats. The accumulation of different sterols in the two tissues of the same animals was observed. Δ^5,7-Cholestadien-3β-ol, Δ^7,24-cholestadien-3β-ol and Δ^5,7,24-cholestatrien-3β-ol, which are not present in detectable amounts in control brains, were identified in brains of growing rats treated with AY-9944. An accumulation of Δ^5,7-cholestadien-3β-ol only was found in adult rat tissues. These differences in sterol accumulation are discussed in relation with the possible in vivo pathways of cholesterol biosynthesis.     

Comparing the Performance of Organic Solvent Nanofiltration Membranes in Non-Polar Solvents

Organic solvent nanofiltration (OSN) is gradually expanding from academic research to industrial implementation. The need for membranes with low and sharp molecular weight cutoffs that are able to operate under aggressive OSN conditions is increasing. However, the lack of comparable and uniform performance data frustrates the screening and membrane selection for processes. Here, a collaboration is presented between several academic and industrial partners analyzing the separation performance of 10 different membranes using three model process mixtures. Membrane materials range from classic polymeric and thin film composites (TFCs) to hybrid ceramic types. The model solutions were chosen to mimic cases relevant to today's industrial use: relatively low molar mass solutes (330–550 Da) in n-heptane, toluene, and anisole.     

On preconditioning for a parallel solution of the Richards equation

In this paper, we present a class of preconditioning methods for a parallel solution of the three-dimensional Richards equation. The preconditioning methods Jacobi scaling, block-Jacobi, incomplete lower–upper, incomplete Cholesky and algebraic multigrid were applied in combination with a parallel conjugate gradient solver and tested for robustness and convergence using two model scenarios. The first scenario was an infiltration into initially dry, sandy soil discretised in 500,000 nodes. The second scenario comprised spatially distributed soil properties using 275,706 numerical nodes and atmospheric boundary conditions. Computational results showed a high efficiency of the nonlinear parallel solution procedure for both scenarios using up to 64 processors. Using 32 processors for the first scenario reduced the wall clock time to slightly more than 1% of the single processor run. For scenario 2 the use of 64 processors reduces the wall clock time to slightly more than 20% of the 8 processors wall clock time. The difference in the efficiency of the various preconditioning methods is moderate but not negligible. The use of the multigrid preconditioning algorithm is recommended, since on average it performed best for both scenarios.