Forging furnace with thermochemical waste-heat recuperation by natural gas reforming: Fuel saving and heat balance

This paper considers thermochemical recuperation (TCR) of waste-heat using natural gas reforming by steam and combustion products. Combustion products contain steam (H₂O), carbon dioxide (CO₂), and ballast nitrogen (N₂). Because endothermic chemical reactions take place, methane steam-dry reforming creates new synthetic fuel that contains valuable combustion components: hydrogen (H₂), carbon monoxide (CO), and unreformed methane (CH₄). There are several advantages to performing TCR in the industrial furnaces: high energy efficiency, high regeneration rate (rate of waste-heat recovery), and low emission of greenhouse gases (CO₂, NO_x). As will be shown, the use of TCR is significantly increasing the efficiency of industrial furnaces – it has been observed that TCR is capable of reducing fuel consumption by nearly 25%. Additionally, increased energy efficiency has a beneficial effect on the environment as it leads to a reduction in greenhouse gas emissions.     

On stochastic comparisons of finite mixtures for some semiparametric families of distributions

In this paper, we consider the classical finite mixture model, which is an effective tool for modeling lifetime distributions for random samples from heterogeneous populations. We discuss new results on stochastic comparison for two finite mixtures when each of them is drawn from one of the following semiparametric families, i.e., proportional hazards, accelerated lifetime and proportional reversed hazards.     

Abnormal hepatic mitochondrial respiration and cytochrome C oxidase activity in rats with long-term copper overload

BACKGROUND: Dietary copper overload in the rat is associated with morphological abnormalities and lipid peroxidation of hepatic mitochondria. This study was designed to determine if copper hepatotoxicity was associated with functional alterations in mitochondrial respiration in conjunction with lipid peroxidation. METHODS: Weanling male rats were pair-fed for 8 weeks on diets containing normal or high levels of copper in combination with sufficient vitamin E. Serum and liver samples were obtained, and hepatic mitochondria were isolated by differential centrifugation. RESULTS: Oxidant injury (decreased levels of hepatic glutathione and alpha tocopherol and increased levels of mitochondrial thiobarbituric acid-reacting substances) was present in the copper-overloaded rats. Serum aminotransferase levels correlated with concentrations of mitochondrial copper and thiobarbituric acid-reacting substances. Copper overload caused a decrease in state 3 respiration and the respiratory control ratio in hepatic mitochondria when several electron donors were used. Analysis of the oxidoreductase activities of the four mitochondrial electron transport protein complexes showed that complex IV (cytochrome C oxidase) activity was reduced by 60% in copper overload. CONCLUSIONS: Functional abnormalities of mitochondria accompany lipid peroxidation and the morphological alterations caused by copper overload, supporting the hypothesis that the mitochondrion is one of the major intracellular targets in copper hepatotoxicity.     

X-ray diffraction study of the structure of Al-Ni melts

The structures of Al-Ni melts with 0, 10, 18, 25, 28, 32, 40, 75, 90, and 100 at % Ni are studied by X-ray diffraction. The structural models of the melts, which were analyzed by the Voronoi-Delaunay transformation method, are reconstructed by a procedure that is inverse to the Monte Carlo method using experimental structure-factor curves. The parameters characterizing atomic ordering at short and longer distances are determined to change nonmonotonically in the range 10–40 at % Ni with an extreme in the vicinity of the melt containing 28 at % Ni. In this concentration range, nickel atoms are predominantly located in the pentagonal rings of polytetrahedral clusters of the icosahedral type; these atoms are ～4.1 Å from each other. Such clusters generate a prepeak in the structure-factor curves of the melts in the range 10–40 at % Ni.     

DBS电视接收机低中频与直接转换调谐器的比较

CMOS技术是把L波段卫星调谐器、解调器和其它功能整合至低成本、高效能单芯片的关键。本文将探讨新型低中频和传统零中频DBS调谐器架构在单芯片DBS射频前端设计中的优缺点。     

Hydrorefining of catalytic naphtha cuts

A polyfunctional catalyst for hydrorefining of the catalytic naphtha cut with a high olefin content is proposed. This catalyst induces isomerization and hydrogenation of olefins on contact with the feedstock with formation of isoparaffins, isomerization of n-paraffins, hydrotreating to remove sulfur, and other processes. The naphtha obtained satisfies the Euro-4 standard (2005) with respect to quality. __________ Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 5, pp. 35–3 6, September–October, 2007.     

hTERT-Driven Immortalization of RDEB Fibroblast and Keratinocyte Cell Lines Followed by Cre-Mediated Transgene Elimination

The recessive form of dystrophic epidermolysis bullosa (RDEB) is a crippling disease caused by impairments in the junctions of the dermis and the basement membrane of the epidermis. Using ectopic expression of hTERT/hTERT + BMI-1 in primary cells, we developed expansible cultures of RDEB fibroblasts and keratinocytes. We showed that they display the properties of their founders, including morphology, contraction ability and expression of the respective specific markers including reduced secretion of type VII collagen (C7). The immortalized keratinocytes retained normal stratification in 3D skin equivalents. The comparison of secreted protein patterns from immortalized RDEB and healthy keratinocytes revealed the differences in the contents of the extracellular matrix that were earlier observed specifically for RDEB. We demonstrated the possibility to reverse the genotype of immortalized cells to the state closer to the progenitors by the Cre-dependent hTERT switch off. Increased β-galactosidase activity and reduced proliferation of fibroblasts were shown after splitting out of transgenes. We anticipate our cell lines to be tractable models for studying RDEB from the level of single-cell changes to the evaluation of 3D skin equivalents. Our approach permits the creation of standardized and expandable models of RDEB that can be compared with the models based on primary cell cultures.     

Pre-Senescence Induction in Hepatoma Cells Favors Hepatitis C Virus Replication and Can Be Used in Exploring Antiviral Potential of Histone Deacetylase Inhibitors

Recent evidence suggests that fibrotic liver injury in patients with chronic hepatitis C correlates with cellular senescence in damaged liver tissue. However, it is still unclear how senescence can affect replication of the hepatitis C virus (HCV). In this work, we report that an inhibitor of cyclin-dependent kinases 4/6, palbociclib, not only induced in hepatoma cells a pre-senescent cellular phenotype, including G1 arrest in the cell cycle, but also accelerated viral replicon multiplication. Importantly, suppression of HCV replication by direct acting antivirals (DAAs) was barely affected by pre-senescence induction, and vice versa, the antiviral activities of host-targeting agents (HTAs), such as inhibitors of human histone deacetylases (HDACi), produced a wide range of reactions—from a dramatic reduction to a noticeable increase. It is very likely that under conditions of the G1 arrest in the cell cycle, HDACi exhibit their actual antiviral potency, since their inherent anticancer activity that complicates the interpretation of test results is minimized.     

Product composition of the dynamic conversion of brown coal in supercritical water

The product composition of the dynamic conversion of brown coal, which was continuously supplied as a water-coal slurry to a flow reactor at 30 MPa, was studied. The temperature of water and coal particles was increased from room temperature to 400°C (top part of the reactor). The conversion of the organic matter of coal was ～48%, and the products collected at the reactor outlet consisted of solid tar components, substances dissolved and emulsified in water, and volatile substances, whose major constituent was CO₂. The composition of solid tar components and oils was determined.     

Catalytic combustion over platinum group catalysts: fuel-lean versus fuel-rich operation

Performance data are presented for methane oxidation on alumina-supported Pd, Pt, and Rh catalysts under both fuel-rich and fuel-lean conditions. Catalyst activity was measured in a micro-scale isothermal reactor at temperatures between 300 and 800 °C. Non-isothermal (near adiabatic) temperature and reaction data were obtained in a full-length (non-differential) sub-scale reactor operating at high pressure (0.9 MPa) and constant inlet temperature, simulating actual reactor operation in catalytic combustion applications.

Under fuel-lean conditions, Pd catalyst was the most active, although deactivation occurred above 650 °C, with reactivation upon cooling. Rh catalyst also deactivated above 750 °C, but did not reactivate. Pt catalyst was active above 600 °C. Fuel-lean reaction products were CO₂ and H₂O for all three catalysts.

The same catalysts tested under fuel-rich conditions demonstrated much higher activity. In addition, a ‘lightoff’ temperature was found (between 450 and 600 °C), where a stepwise increase in reaction rate was observed. Following ‘lightoff’ partial oxidation products (CO, H₂) appeared in the mixture, and their concentration increased with increasing temperature. All three catalysts exhibited this behavior.

High-pressure (0.9 MPa) sub-scale reactor and combustor data are shown, demonstrating the benefits of fuel-rich operation over the catalyst for ultra-low emissions combustion.