Short contact time dissolution of vitrinite and inertinite concentrates

The short contact time dissolution of vitrinite and inertinite concentrates of an Australian bituminous coal was studied under isothermal conditions with tetralin as solvent. The reactivity of the two maceral types and the yields and nature of the products were determined for a range of reaction temperatures (400, 420 and 440 °C) and reaction times (2–20 min). The dissolution of vitrinite proceeded at a significantly greater rate than for inertinite and was associated with greater selectivity to soluble non-gaseous products. At very short reaction times (2 min), the vitrinite underwent solubilizing reactions to yield products of higher molecular weight and greater oxygen functionality than was the case for inertinite, for which changes in the chemical nature of the products were negligible over the range of conditions studied. At longer reaction times (5 min), the composition of the vitrinite-derived products was similar to that of the inertinite-derived products.     

Characterization of GaAs layers grown on polycrystalline GaAs by LPE and current controlled LPE

It is the purpose of this paper to investigate the suitability and effectiveness of growth of thin GaAs layers on polycrystalline GaAs substrates by liquid phase epitaxy (LPE) and current controlled LPE (CCLPE). During each growth run LPE and CCLPE were used to grow thin GaAs layers on two large-grain polycrystalline GaAs substrates cut from the same wafer and simultaneously placed in the same growth system. The grain boundary was exposed by cleaving the samples perpendicular to the grain boundary. Notnarski contrast, SEM, C-V and Hall measurements were performed in order to determine the surface morphology, discontinuity of epilayer at the grain boundary, epilayer thickness unform-ity, resistivity (in directions parallel and perpendicular to the grain boundary), and dopant concentration. The CCLPE system was carefully designed so that growth would take place only by electrotransport in the absence of convection or Peltier cooling. The results indicate that CCLPE yields layers with improved surface morphology and thickness uniformity as compared to those grown by LPE. In some samples the epilayer was discontinuous at certain grain boundaries. Results are presented on CCLPE growth rate dependence upon grain orientation, current density, and continuity of the epilayer at the grain boundary.     

Molecular recognition of diketide substrates by a beta-ketoacyl-acyl carrier protein synthase domain within a bimodular polyketide synthase

BACKGROUND: Modular polyketide synthases (PKSs) are large multifunctional proteins that catalyze the biosynthesis of structurally complex bioactive products. The modular organization of PKSs has allowed the application of a combinatorial approach to the synthesis of novel polyketides via the manipulation of these biocatalysts at the genetic level. The inherent specificity of PKSs for their natural substrates, however, may place limits on the spectrum of molecular diversity that can be achieved in polyketide products. With the aim of further understanding PKS specificity, as a route to exploiting PKSs in combinatorial synthesis, we chose to examine the substrate specificity of a single intact domain within a bimodular PKS to investigate its capacity to utilize unnatural substrates. RESULTS: We used a blocked mutant of a bimodular PKS in which formation of the triketide product could occur only via uptake and processing of a synthetic diketide intermediate. By introducing systematic changes in the native diketide structure, by means of the synthesis of unnatural diketide analogs, we have shown that the ketosynthase domain of module 2 (KS2 domain) in 6-deoxyerythronolide B synthase (DEBS) tolerates a broad range of variations in substrate structure, but it strongly discriminates against some others. CONCLUSIONS: Defining the boundaries of substrate recognition within PKS domains is crucial to the rationally engineered biosynthesis of novel polyketide products, many of which could be prepared only with great difficulty, if at all, by direct chemical synthesis or semi-synthesis. Our results suggest that the KS2 domain of DEBS1 has a relatively relaxed specificity that can be exploited for the design and synthesis of medicinally important polyketide products.     

Percutaneous transjejunal biliary intervention: 10-year experience with access via Roux-en-Y loops

Ancylostoma duodenale is still the dominant hookworm species in the Mediterranean area, India, China and Japan. In the present study, biopsied materials were taken from the small intestine of 30 patients infected only with A. duodenale and 12 cross matched controls. The results showed some pathological changes in severely infected cases. However, normal or insignificant changes were seen in the enzymatic activity of the intestinal mucosa.     

Passive Picoinjection Enables Controlled Crystallization in a Droplet Microfluidic Device

Segmented flow microfluidic devices offer an attractive means of studying crystallization processes. However, while they are widely employed for protein crystallization, there are few examples of their use for sparingly soluble compounds due to problems with rapid device fouling and irreproducibility over longer run‐times. This article presents a microfluidic device which overcomes these issues, as this is constructed around a novel design of “picoinjector” that facilitates direct injection into flowing droplets. Exploiting a Venturi junction to reduce the pressure within the droplet, it is shown that passive injection of solution from a side‐capillary can be achieved in the absence of an applied electric field. The operation of this device is demonstrated for calcium carbonate, where highly reproducible results are obtained over long run‐times at high supersaturations. This compares with conventional devices that use a Y‐junction to achieve solution loading, where in‐channel precipitation of calcium carbonate occurs even at low supersaturations. This work not only opens the door to the use of microfluidics to study the crystallization of low solubility compounds, but the simple design of a passive picoinjector will find wide utility in areas including multistep reactions and investigation of reaction dynamics.     

Bacteriological Quality of Rainwater in Roof and Ground Catchment Systems in Botswana

ABSTRACT

Bacteriological analyses were conducted on water samples from 13 roof tanks and 8 ground catchment tanks in Botswana in 1983. The results show that rainwater collected from corrugated iron roofs and stored in covered tanks is of high quality compared with traditional water sources and could provide a safe drinking water supply. The results for the ground catchment tanks, however, indicated that the water posed a serious health hazard. This is significant since several hundred ground tanks are already being used to provide water for other things besides human consumption. Since more ground tanks are planned both in Botswana and elsewhere in Africa the fencing of the catchment area and the use of simple sand and charcoal filters are recommended as the most practical means of insuring improved water quality in ground tanks.