Weekly storage of coolness in heavy brick and adobe walls

Weekly storage of coolness in heavy walls (walls with large thermal inertia or large characteristic time constants or low Fourier numbers) was investigated numerically by considering one-dimensional heat conduction through the walls. The study consisted of first analyzing the heat flow through a single wall and considering various boundary conditions on the inside. The boundary conditions were: constant inside air tempeture throughout the day, variable inside air temperature on a 24-hour cycle, and variable inside air temperature on a 48-hour cycle. Next, the heat flow through walls was studied through a thermal network analysis of a simple building. In this case it was assumed that the ambient air temperature (following a periodic distribution) was increased suddenly and followed this new distribution for many days thereafter.It was concluded that walls with high thermal inertia or time constant can store coolness for several days. The larger the time constant of the wall (for example adobe as compared with brick) the longer it takes for the wall temperature to reach a steady periodic distribution after the change has occurred. However, because of low thermal conductivity of adobe, the retrieval of the stored coolness in these walls is slow, and the mean daily temperature of the room air in the adobe building does not change appreciably beyond seven days after the change. Increase of the wall thickness beyond 50 cm does not improve the thermal performance of the building significantly.     

Effect of carbon surface oxidation on platinum supported carbon particles on the performance of gas diffusion electrodes for the oxygen reduction reaction

The effect of carbon surface oxidation on platinum supported carbon particles (Pt/C) with nitric acid was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, polarization experiments and chronoamperometry. Cyclic voltammograms, polarization curves and electrochemical impedance spectra showed that the treated catalyst had much larger active surface area and higher ionic conductivity than the untreated catalyst, and provided enhanced performance for oxygen reduction. The formation of acidic groups was examined by IR spectra. The Pt/C surface oxidation had a large effect on the performance of a gas diffusion electrode for oxygen reduction reaction.     

Synthesis and thermomechanical characterization of polyurethane elastomers extended with α,ω‐alkane diols

A series of polyurethane (PU) elastomers was prepared by the reaction of poly(?‐caprolactone) and 4,4′‐diphenylmethane diisocyanate, which was extended with a series of chain extenders (CEs) having 2–10 methylene units in their structure. The completion of the reaction was confirmed by Fourier transform infrared spectroscopy. The chemical structures of the synthesized PU samples were characterized with Fourier transform infrared, ¹H‐NMR, and ¹³C‐NMR spectroscopy, and the thermal properties were determined by thermogravimetric analysis, DSC, and dynamic mechanical thermal analysis techniques. The mechanical properties were also studied and are discussed. The thermogravimetric analysis and DSC analysis showed that CE length had a considerable effect on the thermal properties of the prepared samples. The dynamic mechanical thermal analysis and damping peaks were also affected by the number of methylene units in the CE length. The elastomer extended with 1,2‐ethane diol exhibited optimum thermal properties, whereas the elastomer based on 1,10‐decane diol displayed the worst thermal properties. Tensile strength and elongation at break decreased with increasing CE length, whereas hardness showed the opposite trend. The glass‐transition temperature moved toward lower temperatures with increasing CE length. The decrease in the glass‐transition temperature and tensile properties were interpreted in terms of decreasing hard segments and increasing chain flexibility. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Efficient designs of reversible sequential circuits

The Journal of Supercomputing - Recently, the synthesis of reversible sequential circuits has attracted researchers’ attention for implementing low-power logic designs. So far, the direct and...     

Supplier selection using a novel intuitionist fuzzy clustering approach

Supplier selection is a complicated decision-making problem involving multicriteria, alternative and decision makers (DMs). The main purpose of this paper is to demonstrate the use of a clustering-based method to solve a group decision making (GDM) problem and, also to achieve more realistic and homogeneous results. Intuitionistic fuzzy value (IFV) is used to show the decision makers’ preferences and IFN clustering method is utilized to cluster around DM's preferences. Intuitionistic fuzzy weighted geometric (IFWG) is applied to aggregate the obtained clusters. Ranking process is used based on the two indices, score function and accuracy function, to rank the alternatives. Lastly, to demonstrate the efficiency of our proposed method, it is implemented to choose suppliers in a car factory.The strength of the propose approach is considering the group agreement on proposed DMs’ preferences for giving different effect on their judgment. Besides, encountering the qualitative judgment of DMs using IFV concept with score function and the accuracy function for modeling the DMs’ knowledge is the other contribution of this paper.     

Solving coupled matrix equations over generalized bisymmetric matrices

In this paper, an iterative algorithm is established for finding the generalized bisymmetric solution group to the coupled matrix equations (including the generalized (coupled) Lyapunov and Sylvester matrix equations as special cases). It is proved that proposed algorithm consistently converges to the generalized bisymmetric solution group for any initial generalized bisymmetric matrix group. Finally a numerical example indicates that proposed algorithm works quite effectively in practice.     

An isogeometrical approach to structural topology optimization by optimality criteria

The Isogeometric Analysis (IA) method is applied for structural topology optimization instead of finite elements. For this purpose, a control point based Solid Isotropic Material with Penalization (SIMP) method is employed and the material density is considered as a continuous function throughout the design domain and approximated by the Non-Uniform Rational B-Spline (NURBS) basis functions. To prevent the formation of layouts with porous media, a penalization technique similar to the SIMP method is used. For optimization an optimality criteria is derived and implemented. A few examples are presented to demonstrate the performance of the method. It is shown that, dissimilar to the element based SIMP topology optimization, the resulted layouts by this method are independent of the number of the discretizing control points and checkerboard free.     

Cheep! Cheep!

Open Forum

Cheep! Cheep!     

Theoretical and experimental analyses of rheological,compatibility and mechanical properties of PVMQ/XNBR-g GMA/XNBR/GO ternary hybrid nanocomposites

Iranian Polymer Journal - Effects of graphene oxide (GO) on various properties of rubber hybrid nanocomposites based on PVMQ/XNBR-g-GMA/XNBR (phenyl-vinyl-methyl-polysiloxane/carboxylated nitrile...