Object-based hyperspectral image classification using a new latent block model based on hidden Markov random fields

Pattern Analysis and Applications - Efficient high-dimensional analyses of hyperspectral datasets and their utilization within classification algorithms is a popular topic in the field of data...     

Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

A novel triple notch‐bands ultra wide‐band band‐pass filters using parallel multi‐mode resonators and CSRRs

This article discusses a technique based on combination of multimode resonators (MMR) and complementary split ring resonators (CSRR) to design multi notch‐bands ultra wide‐band (UWB) band‐pass filters (BPF). The proposed structure consists of two parallel multimode resonators, resulting in a dual notch‐band UWB BPF, integrated with a single cell of CSRR to realize the third notch‐band. The mechanism of realizing the notch‐bands is mathematically presented and a triple notch‐bands UWB BPF is designed, simulated and fabricated. The overall size of the proposed filter is reported to be around 36 × 7.7 mm² where a size reduction of around 35% is demonstrated in comparison to the conventional filter. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:375–381, 2014.     

Removal of iron from milk of lime to produce pure precipitated calcium carbonate

ABSTRACT

Milk of lime (MOL) suspension is widely utilized in many industries; however, in some of the applications, such as the production of precipitated calcium carbonate (PCC), the suspension must be of high purity and quality. In other words, the amounts of iron and magnesium should be so little so that the final PCC product would be of high quality. The effects of initial temperature, quicklime particle size, amount of initial solid present, agitation rate, and time on the recovery of hydrated lime and iron/magnesium reduction efficiency were investigated through a central composite design (CCD) of experiments. The iron reduction efficiency and the weight recovery of hydrated lime were obtained as 91% and 98.5%, respectively. The reduction of magnesium was not significant in this stage. Moreover, approximately the whole existing SiO₂ was eliminated.     

F-LEACH: a fuzzy-based data aggregation scheme for healthcare IoT systems

The Journal of Supercomputing - Internet of Things (IoT) is an emerging paradigm that consists of numerous connected and interrelated devices with embedded sensors, exchanging data with each other...     

Ionization coefficient of monolayer graphene nanoribbon

A semi-analytical model for impact ionization coefficient of graphene nanoribbon (GNR) is presented. The model is derived by calculating probability of electrons reaching ionization threshold energy E_t and the distance travelled by electron gaining E_t. In addition, ionization threshold energy is semi-analytically modelled for GNR. During modelling, we justify our assumptions using analytical modelling and comparison with simulation. Furthermore, it is shown that conventional silicon models are not valid for calculation of ionization coefficient of GNR. Finally, the profile of ionization is presented using the proposed models and the results are compared with that of silicon.     

Parallel‐series connected rectenna array using frequency selective surface (FSS) for power harvesting applications at 5.8 GHz

This article presents a frequency selective surface (FSS) and rectenna array in parallel‐series connection to harvest power of wireless power systems. To improve the basic antenna parameters, a frequency selective surface was mounted on the reverse side of the substrate. According to the results, the proposed method showed significant improvement in comparison to other methods in both single and rectenna array. Moreover, the conversion efficiency of the presented technique was increased to 76%. The output voltage of 4.5 and 9 V and the current of 60 and 120 mA were resulted for 5 and 10 rectenna units, respectively. The proposed arrays can be expanded to large scale integrated array without any significant degradation in conversion efficiency.     

Direct extraction of Mo(VI) from sulfate solution by synergistic extractants in the rotation column

Direct extraction of molybdenum from sulfate solution with synergistic extractants (mixture of D₂EHPA and TBP) was studied in the rotation column. The influence of extractant concentration and initial pH of aqueous phase was studied in the bench scale experiments. The outcomes demonstrated that the synergistic solvent extraction enhances the constancy of the extracted complexes for transfer into the organic phase. In the continuous experiments, the effect of different operating parameters such as speed of agitation, inlet solvent flow rate and inlet aqueous flow rate on the holdup, mean drop size, drop size distribution, slip and characteristic velocities and extraction percentage were examined. Modified correlations were proposed for prediction of hydrodynamic parameters with consideration of reaction extraction condition in the rotation column. Furthermore, these correlations were compared with the experimental data. According to the results, the direct extraction of Mo (VI) from aqueous solution and sulfuric media with extraction efficiency of 90.4% was obtained at higher rotor speed (240 r·min^-1 rpm) in this column.     

Performance evaluation of supported ionic liquid membrane for removal of phenol

This work evaluates the performance of ionic liquid in supported liquid membrane (SLM) for the removal of phenol from wastewater. Ionic liquids are organic salts entirely composed of organic cations and either organic or inorganic anions. Due to the fact that the vapor pressure of ionic liquid is not detectable and they are sparingly soluble in most conventional solvents, they can be applied in SLM as the organic phase. In this work, 1-n-alkyl-3-methylimidazolium salts, [C_nMIM]⁺[X]⁻ have been investigated so as to determine an optimal supported ionic liquid membrane. The effect of operational parameters such as pH, stirring speed and the concentration of stripping agent has been studied, and an evaluation of different membrane supports were also carried out. With a minimal amount of the ionic liquid 1-Butyl-3-methylimidazolium hydrogensulfate, 85% phenol removal could be achieved by using polytetrafluoroethylene hydrophobic membrane filter in the SLM.     

Modeling of linear time-varying systems by linear time-invariant systems of lower order

A technique for modeling linear time-varying differential systems by linear time-invariant systems of lower order is discussed and criteria for determining stability, uniqueness, and the choice of the model of a given dimension are developed. In addition, a lower bound for the minimized performance index is derived and the effect on it of decreasing the dimension of the model is demonstrated.