Influence of the quality of the heterointerface on the cyclotron resonance spectra of InAs/(AlGa)Sb heterostructures

Cyclotron resonance is measured in solitary type-II InAs-AlGaSb quantum wells grown by molecular-beam epitaxy under various growth conditions. Quantum oscillations observed in the cyclotron resonance spectra in InAs-GaSb samples are attributed to scattering by a short-range potential due to roughness of the heterointerface. A new method based on measurement of the cyclotron resonance spectra is proposed for assessing the quality of the heterointerface. Fiz. Tekh. Poluprovodn. 31, 1246–1248 (October 1997)     

Inspection of the Strength Characteristics and Heat-Treatment Quality of Ferromagnetic Articles Based on Parameters of the Residual-Magnetization Hysteresis Loop upon Their Local Magnetization and Magnetization Reversal in a Pulsed Magnetic Field with a Variable Amplitude: I. Parameters of the Hysteresis Loop

Results of an experimental study of the anomalous behavior of the residual-magnetization hysteresis of ferromagnetic articles that, under local magnetization and magnetization reversal in a pulsed magnetic field with a variable amplitude, were subjected to heat treatment under different conditions are reported. Parameters of the hysteresis and their dependence on the magnetization and magnetization-reversal conditions, as well as on the magnetic properties of a material, are considered.__________Translated from Defektoskopiya, Vol. 41, No. 5, 2005, pp. 3–13.Original Russian Text Copyright © 2005 by Matyuk, Mel’gui, Pinchukov, Lyubarets.All papers in this issue are devoted to the 100th anniversary of the birth of the late M.N. Mikheev, corresponding member of the Russian Academy of Sciences and one of the founders of magnetic structural analysis.     

Textural states of a hot-worked MA2-1 magnesium alloy

Quantitative texture analysis is used to study texture formation in an MA2-1 magnesium alloy subjected to axisymmetric upsetting at temperatures of 250–450°C and strain rates of 10^?4–10^{0 ?1}. The deformed structure is examined by optical microscopy, and the results obtained are used to plot the structural-state diagram of the alloy after 50% upsetting. The experimental textures are compared with the textures calculated in terms of a thermoactivation model.     

Unsteady heat transfer in a system of three coaxial finite cylinders

An integral transformation with the aid of which a solution of the problem of unsteady-state heat transfer in a system of three coaxial finite cylinders with different boundary conditions on their surfaces depending on space and time is presented. Each of the cylinders evolves heat of a certain intensity, depending on time and coordinates. A numerical solution of one variant of the boundary conditions is given and illustrated by figures. The method of transforming the solution of the problem with other boundary conditions is shown. __________ Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 80, No. 1, pp. 140–148, January–February, 2007.     

Syntactic mismatches in machine translation

This paper addresses one of the central problems arising at the transfer stage in machine translation: syntactic mismatches, that is, mismatches between a source-language sentence structure and its equivalent target-language sentence structure. The level at which we assume the transfer to be carried out is the Deep-Syntactic Structure (DSyntS) as proposed in the Meaning-Text Theory (MTT). DSyntS is abstract enough to avoid all types of divergences that result either from restricted lexical co-occurrence or from surface-syntactic discrepancies between languages. As for the remaining types of syntactic divergences, all of them occur not only interlinguistically, but also intralinguistically; this means that establishing correspondences between semantically equivalent expressions of the source and target languages that diverge with respect to their syntactic structure is nothing else than paraphrasing. This allows us to adapt the powerful intralinguistic paraphrasing mechanism developed in MTT for purposes of interlinguistic transfer.     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Effects of sulfur content in tube steel welds on sulfide cracking

Materials Science - Results are presented on the tendency to stress corrosion cracking in NACE solution for welded joints in tube steel with sulfur contents from 0.002 to 0.028%. Threshold stresses...     

Influence of oxygen on the ion-beam synthesis of silicon carbide buried layers in silicon

The properties of silicon structures with silicon carbide (SiC) buried layers produced by high-dose carbon implantation followed by a high-temperature anneal are investigated by Raman and infrared spectroscopy. The influence of the coimplantation of oxygen on the features of SiC buried layer formation is also studied. It is shown that in identical implantation and post-implantation annealing regimes a SiC buried layer forms more efficiently in CZ Si wafers or in Si (CZ or FZ) subjected to the coimplantation of oxygen. Thus, oxygen promotes SiC layer formation as a result of the formation of SiO_x precipitates and accommodation of the volume change in the region where the SiC phase forms. Carbon segregation and the formation of an amorphous carbon film on the SiC grain boundaries are also discovered. Fiz. Tekh. Poluprovodn. 32, 1414–1419 (December 1998)     

Real-Time Global Illumination for VR Applications

Real-time global illumination in VR systems enhances scene realism by incorporating soft shadows, reflections of objects in the scene, and color bleeding. The Virtual Light Field (VLF) method enables real-time global illumination rendering in VR. The VLF has been integrated with the Extreme VR system for real-time GPU-based rendering in a Cave Automatic Virtual Environment.