Towards deterministic downscaling of SMOS soil moisture using MODIS derived soil evaporative efficiency

A deterministic approach for downscaling ～ 40 km resolution Soil Moisture and Ocean Salinity (SMOS) observations is developed from 1 km resolution MODerate resolution Imaging Spectroradiometer (MODIS) data. To account for the lower soil moisture sensitivity of MODIS surface temperature compared to that of L-band brightness temperature, the disaggregation scale is fixed to 10 times the spatial resolution of MODIS thermal data (10 km). Four different analytic downscaling relationships are derived from MODIS and physically-based model predictions of soil evaporative efficiency. The four downscaling algorithms differ with regards to i) the assumed relationship (linear or nonlinear) between soil evaporative efficiency and near-surface soil moisture, and ii) the scale at which soil parameters are available (40 km or 10 km). The 1 km resolution airborne L-band brightness temperature from the National Airborne Field Experiment 2006 (NAFE'06) are used to generate a time series of eleven clear sky 40 km by 60 km near-surface soil moisture observations to represent SMOS pixels across the three-week experiment. The overall root mean square difference between downscaled and observed soil moisture varies between 1.4% v/v and 1.8% v/v depending on the downscaling algorithm used, with soil moisture values ranging from 0 to 15% v/v. The accuracy and robustness of the downscaling algorithms are discussed in terms of their assumptions and applicability to SMOS.     

Influence of surface layer on hydrology and biology of gravel bed vertical flow constructed wetlands.

In France, gravel vertical flow constructed wetlands (gVFCWs) were adapted to treat raw wastewater, which led to important accumulations of matter in filters (organic and mineral). To prevent clogging, large gravel sizes were employed (O 2-6 mm). The aim of this paper was to present the influences of matter accumulation on the hydraulic and biological behaviour of the system. A one-year survey of accumulated matter content and potential respiration activities was completed in three gVFCWs (operating for 3, 4 and 8 years). Cores were sampled into filters. Results showed a vertical stratification of accumulated matter and respiration rates. Dry accumulated matter quantities ranged from 20 kg m(-2) (3 and 4 years operating) to 80 kg m(-2) in the oldest plant (8 years). Potential respiration was larger in the oldest plant (75g O2m(-2)h(-1)) than in the most recent one (15g O2m(-2)h(-1)). Accumulated matter seemed to play a role both on the water retention (enhancing initial percolation time by 5 times) and biological profile (enhancing microfauna's diversity). Contrary to what is generally proposed in the literature, accumulated matter in French gVFCWs seemed to provide better treatment efficiency without leading to surface clogging compared to systems using sand.     

On the impact of physical layer awareness on scheduling and resource allocation in broadband multicellular IEEE 802.16 systems [Radio Resource Management and Protocol Engineering for IEEE 802.16]

Multicellular networks based on the IEEE 802.16 standard appear to be very promising candidates to provide end users with broadband wireless access. However, they also pose interesting challenges in terms of radio resource management, where several design choices are not specified in the standard, intentionally left open to implementors. For this reason, we focus in this article on scheduling and resource allocation, and investigate how they could operate in a cross-layer fashion. In particular, we describe the principles of joint scheduling and resource allocation for IEEE 802.16 operating in AMC mode, and discuss the critical role played by physical layer considerations, especially intercell interference estimation and channel state awareness, in the obtained performance. This leads to identifying key open issues and possible general solutions     

An improved algorithm for disaggregating microwave-derived soil moisture based on red, near-infrared and thermal-infrared data

Accurate high-resolution soil moisture data are needed for a range of agricultural and hydrologic activities. To improve the spatial resolution of ∼ 40 km resolution passive microwave-derived soil moisture, a methodology based on 1 km resolution MODIS (MODerate resolution Imaging Spectroradiometer) red, near-infrared and thermal-infrared data has been implemented at 4 km resolution. The three components of that method are (i) fractional vegetation cover, (ii) soil evaporative efficiency (defined as the ratio of actual to potential evaporation) and (iii) a downscaling relationship. In this paper, 36 different disaggregation algorithms are built from 3 fractional vegetation cover formulations, 3 soil evaporative efficiency models, and 4 downscaling relationships. All algorithms differ with regard to the representation of the nonlinear relationship between microwave-derived soil moisture and optical-derived soil evaporative efficiency. Airborne L-band data collected over an Australian agricultural area are used to both generate ∼ 40 km resolution microwave pixels and verify disaggregation results at 4 km resolution. Among the 36 disaggregation algorithms, one is identified as being more robust (insensitive to soil, vegetation and atmospheric variables) than the others with a mean slope between MODIS-disaggregated and L-band derived soil moisture of 0.94. The robustness of that algorithm is notably assessed by comparing the disaggregation results obtained using composited (averaged) Terra and Aqua MODIS data, and using data from Terra and Aqua separately. The error on disaggregated soil moisture is systematically reduced by compositing daily Terra and Aqua data with an error of 0.012 vol./vol.     

A sequential model for disaggregating near-surface soil moisture observations using multi-resolution thermal sensors

A sequential model is developed to disaggregate microwave-derived soil moisture from 40 km to 4 km resolution using MODIS (Moderate Imaging Spectroradiometer) data and subsequently from 4 km to 500 m resolution using ASTER (Advanced Scanning Thermal Emission and Reflection Radiometer) data. The 1 km resolution airborne data collected during the three-week National Airborne Field Experiment 2006 (NAFE'06) are used to simulate the 40 km pixels, and a thermal-based disaggregation algorithm is applied using 1 km resolution MODIS and 100 m resolution ASTER data. The downscaled soil moisture data are subsequently evaluated using a combination of airborne and in situ soil moisture measurements. A key step in the procedure is to identify an optimal downscaling resolution in terms of disaggregation accuracy and sub-pixel soil moisture variability. Very consistent optimal downscaling resolutions are obtained for MODIS aboard Terra, MODIS aboard Aqua and ASTER, which are 4 to 5 times the thermal sensor resolution. The root mean square error between the 500 m resolution sequentially disaggregated and ground-measured soil moisture is 0.062 vol./vol. with a bias of − 0.045 vol./vol. and values ranging from 0.08 to 0.40 vol./vol.     

A downscaling method for distributing surface soil moisture within a microwave pixel: Application to the Monsoon '90 data

A downscaling method for the near-surface soil moisture retrieved from passive microwave sensors is applied to the PBMR data collected during the Monsoon '90 experiment. The downscaling method requires (1) the coarse resolution microwave observations, (2) the fine-scale distribution of soil temperature and (3) the fine-scale distribution of surface conditions composed of atmospheric forcing and the parameters involved in the modeling of land surface-atmosphere interactions. During the Monsoon '90 experiment, eight ground-based meteorological and flux stations were operating over the 150 km² study area simultaneously with the acquisition of the aircraft-based L-band PBMR data. The heterogeneous scene is hence composed of eight subpixels and the microwave pixel is generated by aggregating the microwave emission of all sites. The results indicate a good agreement between the downscaled and ground-based soil moisture as long as the intensity of solar radiation is sufficiently high to use the soil temperature as a tracer of the spatial variability of near-surface soil moisture.     

Deadlock Avoidance in Store-and-Forward Networks--II: Other Deadlock Types

This paper describes the construction of loop-free buffer graphs which avoid four types of buffer deadlocks in store-and-forward networks. 1) Progeny deadlock, where original messages spawnother ones, and buffer contention occurs between the original and progeny messages. This occurs when positive or negative acknowledgments are created, e.g., if messages reverse direction after encountering a path failure. 2) Copy-release deadlock, where a message copy is stored at the source node and the buffer is not released until an acknowledgment is received from the destination node. Buffer contention may arise among the original messages, stored copies, and acknowledgments. 3) Pacing deadlock, where a local flow control protocol is used between a network node and attached terminals. Buffer contention may arise between the message flows into and out of the terminal, preventing the transmission of go-ahead commands. 4) Reassembly deadlock, whereby reassembly of packetized messages at the destination node cannot be completed. The solution presented here has the novel features of not requiring preallocation of reassembly buffers before transmission of multiple packets of a multipacket message, and not requiring dedication of buffer space at intermediate nodes for individual messages. These schemes are believed to have modest buffer requirements at each node, and if adequate buffer pools are provided, will incur negligible performance degradations under normal conditions, with overhead increasing under heavy buffer usage when deadlock is near.     

Timing HIV infection with a simple and accurate population viral dynamics model

Clinical trials for HIV prevention can require knowledge of infection times to subsequently determine protective drug levels. Yet, infection timing is difficult when study visits are sparse. Using population nonlinear mixed-effects (pNLME) statistical inference and viral loads from 46 RV217 study participants, we developed a relatively simple HIV primary infection model that achieved an excellent fit to all data. We also discovered that Aptima assay values from the study strongly correlated with viral loads, enabling imputation of very early viral loads for 28/46 participants. Estimated times between infecting exposures and first positives were generally longer than prior estimates (average of two weeks) and were robust to missing viral upslope data. On simulated data, we found that tighter sampling before diagnosis improved estimation more than tighter sampling after diagnosis. Sampling weekly before and monthly after diagnosis was a pragmatic design for good timing accuracy. Our pNLME timing approach is widely applicable to other infections with existing mathematical models. The present model could be used to simulate future HIV trials and may help estimate protective thresholds from the recently completed antibody-mediated prevention trials.     

Pharmacogenetics Informed Decision Making in Adolescent Psychiatric Treatment: A Clinical Case Report

Advances made in genetic testing and tools applied to pharmacogenetics are increasingly being used to inform clinicians in fields such as oncology, hematology, diabetes (endocrinology), cardiology and expanding into psychiatry by examining the influences of genetics on drug efficacy and metabolism. We present a clinical case example of an adolescent male with anxiety, attention deficit hyperactivity disorder (ADHD) and autism spectrum disorder who did not tolerate numerous medications and dosages over several years in attempts to manage his symptoms. Pharmacogenetics testing was performed and DNA results on this individual elucidated the potential pitfalls in medication use because of specific pharmacodynamic and pharmacokinetic differences specifically involving polymorphisms of genes in the cytochrome p450 enzyme system. Future studies and reports are needed to further illustrate and determine the type of individualized medicine approach required to treat individuals based on their specific gene patterns. Growing evidence supports this biological approach for standard of care in psychiatry.