Separation of di- and tripeptides with solvent extraction and an emulsion liquid membrane

The extraction equilibria of various di- and tripeptides with di-2-ethylhexylphosphoric acid (D2EHPA) were studied at low pH values. The complex extracted to organic phase consisted of one molecule of peptide and two molecules of D2EHPA dimer. The extraction constants of the peptides correlated well with the distribution coefficients of peptides between 1-octanol and water, which is a measure of hydrophobicity. The permeation rates of peptides through an emulsion liquid membrane were examined by using D2EHPA as a carrier, Span 80 as an emulsifier and kerosene as a diluent. The rates varied considerably with peptide type, depending upon the hydrophobicity.     

Transflective IPS‐LCD with improved reflective contrast ratio

Abstract— In order to improve the reflective contrast ratio of transflective IPS‐LCDs, a novel pixel design for a normally white reflective IPS has been proposed. In this design, the large‐inter‐electrode‐spacing layout using a novel driving method and a double‐layered electrode have effectively reduced the light leakage. By applying these two technologies, a transflective IPS‐LCD has been successfully demonstrated with a high contrast ratio (15:1) in the reflective mode and a wide‐viewing‐angle characteristic in the transmissive mode.     

The synthesis of amorphous M-Si (M=transition metal) alloy powders by mechanical alloying

Crystalline powders of Si and M (transition metal) in the composition ratio Si M = 2 1 were mechanically alloyed by a laboratory ball mill in an inert atmosphere. The progress of the mechanical alloying was identified by X-ray diffraction. The amorphization reaction between Si and M proceeded according to a second-order reaction. The sequence of the rate of amorphization reaction for the Si-M system was Mn > Ti > V > Ni > Co. The sequence of the rate was correlated to the volume ratio (V _M/V_Si) of the Si-M system except for Si-Ni system. The crystallization of Si-Mn, of which the MA rate was fastest, was studied by means of X-ray diffraction, differential thermal analysis (DTA) and electrical resistivity measurement. We observed parallel changes on crystallization between the thermal event in the DTA tracing and the change of electrical resistance.     

Measurement of Flow Stress in Supercooled Austenite for High Hardenability Steel

In this article, the isothermal flow stress in supercooled austenite was measured for a high hardenability steel. Supercooled austenite forms at the nonequilibrium phase and changes into other phases within a short time. It was confirmed that conventional tensile tests, which require maintaining a constant temperature before stretching, cannot accurately measure the flow stress in supercooled austenite. Therefore, a new tensile test named “the continuous cooling tensile test” was developed. In this test, stretching is conducted during continuous cooling. In the continuous cooling tensile test, the flow stress between 673 K and 973 K (400 °C and 700 °C) was measured. Microscopic observations of the continuous cooling test results verified that the microstructures were supercooled austenite.     

Size-dependent separation of graphene oxide by deformation of packed-gel in a chromatographic column

ABSTRACT

A deformable gel-packed chromatographic column was used to separate as-synthesized graphite oxide with different sizes. The synthesized gel (56 µm) was deformed by pressure of the fluid flow and the gaps in the gels showed a range of sizes. A suspension of graphene oxide (0.1 g/L, 10 mL) was injected, and graphene oxide in the elution had a size at 0.56 μm and 0.14 μm, whereas in half upper and bottom domain of the gel layer graphene oxide had a size at 33 µm and 2.9 µm, respectively, demonstrating that graphene oxide suspension was separated by size through gel layer.     

Point-spread function for a rotationally symmetric birefringent lens

Imaging properties of a birefringent lens, in which the fast (or the slow) axis is distributed in the radial direction whereas magnitude of birefringence varies as a quadratic function of the pupil radius, are investigated by calculating a point-spread function. It is found that the point image is analytically described by using the Lommel function as well as the zero-order Bessel function, and a localized intensity null surrounded by bright regions in all directions can be realized at a geometrical focus under certain conditions. The magnitude of birefringence that is tolerable in image formations is also discussed, assuming that the lens is applied to microlithography.     

Isolation and characterization of the solvent-tolerant Bacillus cereus strain R1

Toluene-tolerant gram-positive bacteria were isolated and identified to belong to the genus Bacillus. They grew in a medium containing yeast extract and in the presence of a separate phase of toluene or other hydrocarbons, but not when aliphatic alcohols were present. The isolate Bacillus cereus R1 did not metabolise or transform toluene. Toluene accumulation in its cells was rapid, unless the organism was supplied with glucose as energy source. In bacteria adapted to toluene, the amount of toluene accumulating in cells was one-half that in nonadapted bacteria. Valinomycin (K+ ionophore) and o-vanadate (ATPase inhibitor) as inhibitors of energy metabolism partly counteracted the effect of glucose as energy source. These results suggest the presence of an efflux mechanism for toluene in strain R1. The nature of this mechanism and its function in a solvent-tolerant gram-positive strain are discussed.     

Aggregate formation of rCHO cells and its maintenance in repeated batch culture in the absence of cell adhesion materials

Aggregate formation of recombinant Chinese hamster ovary (rCHO) cells capable of producing granulocyte colony-stimulating factor (G-CSF), using medium lacking cell adhesion materials in a repeated batch culture, was examined together with cell growth, cell viability and G-CSF production. The rCHO culture was conducted in a rotary shaker and the medium was changed every five days. The formation of stable cell aggregates with high reproducibility was observed after the first medium change. The size of the cell aggregates (consisting of several 10s to 40,000 cells) formed during the repeated batch culture ranged from 30 to 600 microm. The cell density of the aggregates reached as high as 2 x 10(6) cells/ml and the viability was maintained at more than 80% for 19 d. Changing the medium to avoid glucose exhaustion effectively maintained the cell density, cell viability and G-CSF productivity at high levels.