Protective properties of epoxy-based organic coatings on mild steel

The protective properties of epoxy-based organic coatings on mild steel substrates have been studied using the electrochemical impedance spectroscopy (EIS) technique. The effects of coating composition, film thickness and curing temperature on the lifetime of the epoxy coating were investigated. The results obtained indicate that the film composition dramatically affects the rate of corrosion of the metallic substrate. Coatings with low and high content of curing agent exhibit early failure when exposed to an air-saturated 0.5 M aqueous solution of NaCl. Extended lifetimes were observed for samples with a content of the curing agent equal to 8.5% by weight. An increase in lifetime was also observed on increasing the film thickness and the curing temperature. The failure mechanism seems to occur in two steps: the first step is related to water uptake in the film while the second step is related to Cl⁻ ion diffusion through the coating. The results have been interpreted in terms of a model in which the dielectric properties (capacitance and resistance) of the coating depend strongly on the coating composition and are affected by both the water and salt uptake into the film.     

Efficiency,recovery and productivity of continuous reverse osmosis systems: new closed expressions

Numerical and approximate analytical solutions for salt concentration polarization in hyperfiltration with laminar flow in a flat sheet configuration are presented. The analysis accounts for the variation of the water flux in the longitudinal direction. Approximate solutions were obtained with an integral method which was found to provide good agreement with the numerical solution. The integral method allows one to obtain closed expressions for the productivity Q, the recovery R and the efficiency E of a reverse osmosis system which can be applied relatively quickly in design calculations.In this analysis the physical properties of the solution are taken to be constant.     

Protein ultrafiltration: an experimental study

An experimental study was carried out on the ultrafiltration (UF) of protein-containing solutions under different conditions, as compared with a solution of a linear synthetic polymer. Three different fluidynamic regimes were investigated, namely, unstirred batch system, stirred batch system, and recirculating system. The results obtained substantially agree with the predictions of the gel polarization model. A significant effect of the electrolytes on the UF flux has been observed, which can be attributed to solute–solute interaction. The influence of different UF membranes has also been investigated.     

Mechanical strength of PET fibers treated in cold plasma and thermal exposed

As a followup to previous work, experiments with argon and oxygen Radio Frequency plasma treated polyethylene terepthalate (PET) exposed to 100 °C after cold plasma treatment were performed. Tensile tests results in monofilaments treated in oxygen and argon plasma for 5 s, 20 s, 30 s, and 100 s showed a decrease in the average tensile strength compared with the untreated fibers. It was also observed that the reduction in mechanical strength is more significant for argon plasma and very sensitive to the treatment time for oxygen plasma. Experimental data obtained from tensile tests in samples thermal exposed to 100 °C after plasma treatments indicate the same influence of treatment times on mechanical strength, as observed for cold plasma treated fibers. Furthermore, an increase in tensile strength when compared with the samples unexposed to 100 °C was observed. Scanning electron microscopy, used to analyze effects of cold plasma treatment on fibers surfaces, indicates differences in roughness profiles depending on the type of treatment. The distance of roughness interval, D_ri, was a parameter introduced to relate the fibers surface condition and average tensile strength. Statistical analysis of experimental data was performed to explain influences of treatment time, and environmental and temperature effects on mechanical properties.     

Effect of feed protein on carcass composition and meat quality in steers

Forty-five Charolais steers were fed one of four experimental regimes containing maize silage and maize grain supplemented with either protected soyabean-rapessed meal or linseed meal. The first three regimes were formulated to supply the same energy and different protein levels with soyabean-rapessed meal: low (L-SRM), medium (M-SRM) and high (H-SRM). The fourth regime consisted in feeding the same amount (kg/day) of linseed meal as that of soyabean-rapessed meal in the H-SRM regime (LSM). As the protein level increased from L-SRM to H-SRM, the daily weight gain of steers increased and the carcass composition was changed towards higher muscle and lower fat proportions. Though the actual supply of feed protein by regime LSM was close to that achieved with M-SRM, the effect of linseed meal supplementation on weight gain and carcass composition was comparable to that obtained by feeding the high protein level (H-SRM). The dry matter content increased and the heme pigments and lipids contents decreased in longissimus thoracis muscle as the protein supply increased from the low to the high level. Again the amplitude of the differences in meat quality with L-SRM were similar in H-SRM and LSM. Muscle colour, connective tissue and mechanical strength remained practically unaffected by the protein treatments. However, meat was scored less tender in H-SRM and less juicy in treatment LSM than in treatment L-SRM. The results obtained with linseed meal suggest a specific effect of type of feed protein on beef carcass composition and meat quality.     

Upregulation of miR145 and miR126 in EVs from Renal Cells Undergoing EMT and Urine of Diabetic Nephropathy Patients

Simple SummaryDiabetic nephropathy is one of the most frequent complications of diabetes, resulting from diffuse damage to different kidney cells. The identification of subjects at risk is mandatory to prevent its development and provide appropriate therapies reducing the unmanageable evolution towards end-stage kidney disease. The aim of this work was to identify urinary-derived extracellular vesicles (EVs) miRNA cargo to be used as biomarker of kidney damage in diabetic patients. The miRNA profile was then correlated with the molecular mechanism associated with the glomerular and tubular damage using a diabetic-like model. In patients, miR145 and miR126 in urinary EVs increased together with albuminuria. MiR145 and miR126 increased in parallel in EVs from renal epithelial cells undergoing transition to a fibrotic mesenchymal phenotype. These data unveiled a role for miR126 and miR145 as the biomarkers of damage progression and proteinuria development in diabetic nephropathy. AbstractDiabetic nephropathy (DN) is a severe kidney-related complication of type 1 and type 2 diabetes and the most frequent cause of end-stage kidney disease. Extracellular vesicles (EVs) present in the urine mainly derive from the cells of the nephron, thus representing an interesting tool mirroring the kidney’s physiological state. In search of the biomarkers of disease progression, we here assessed a panel of urinary EV miRNAs previously related to DN in type 2 diabetic patients stratified based on proteinuria levels. We found that during DN progression, miR145 and miR126 specifically increased in urinary EVs from diabetic patients together with albuminuria. In vitro, miRNA modulation was assessed in a model of TGF-β1-induced glomerular damage within a three-dimensional perfusion system, as well as in a model of tubular damage induced by albumin and glucose overload. Both renal tubular cells and podocytes undergoing epithelial to mesenchymal transition released EVs containing increased miR145 and miR126 levels. At the same time, miR126 levels were reduced in EVs released by glomerular endothelial cells. This work highlights a modulation of miR126 and miR145 during the progression of kidney damage in diabetes as biomarkers of epithelial to mesenchymal transition.     

Influence of Drying Temperature and Harvesting Season on Phenolic Content and Antioxidant and Antiproliferative Activities of Olive (Olea europaea) Leaf Extracts

Interest in plant compounds has increased, given recent evidence regarding their role in human health due to their pleiotropic effects. For example, plant bioactive compounds present in food products, including polyphenols, are associated with preventive effects in various diseases, such as cancer or inflammation. Breast and colorectal cancers are among the most commonly diagnosed cancers globally. Although appreciable advances have been made in treatments, new therapeutic approaches are still needed. Thus, in this study, up to 28 olive leaf extracts were obtained during different seasons and using different drying temperatures. The influence of these conditions on total polyphenolic content (measured using Folin–Ciocalteu assays), antioxidant activity (using Trolox Equivalent Antioxidant Capacity and Ferric Reducing Ability of Plasma assays) and antiproliferative capacity (using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, MTT assays) was tested in breast and colorectal cancer cells. Increased phenolic composition and antioxidant and antiproliferative capacity are noted in the extracts obtained from leaves harvested in autumn, followed by summer, spring and winter. Regarding drying conditions, although there is not a general trend, conditions using the highest temperatures lead to the optimal phenolic content and antioxidant and antiproliferative activities in most cases. These results confirm previously published studies and provide evidence in support of the influence of both harvesting and drying conditions on the biological activity of olive leaf extracts.     

The use of nested desirability functions and quality indices for multi-response robust parameter design problems

A multi-response robust parameter design (RPD) problem-solving technique based on desirability functions is presented in which the means and variances of all responses are placed on a level playing field. The proposal allows a decision maker to integrate their preferences for the individual means and variances. It is shown that the ensuing operating point is a system setting that produces a mutually robust set of responses. In addition, this article offers an approach to assess several RPD strategies via quality indices. The measures presented here allow for a more knowledgeable and comprehensive evaluation of the competing RPD strategies.     

A new hydroxyapatite-based biocomposite for bone replacement

Since the 1970s, various types of ceramic, glass and glass–ceramic materials have been proposed and used to replace damaged bone in many clinical applications. Among them, hydroxyapatite (HA) has been successfully employed thanks to its excellent biocompatibility. On the other hand, the bioactivity of HA and its reactivity with bone can be improved through the addition of proper amounts of bioactive glasses, thus obtaining HA-based composites. Unfortunately, high temperature treatments (1200 °C ÷ 1300 °C) are usually required in order to sinter these systems, causing the bioactive glass to crystallize into a glass–ceramic and hence inhibiting the bioactivity of the resulting composite. In the present study novel HA-based composites are realized and discussed. The samples can be sintered at a relatively low temperature (800 °C), thanks to the employment of a new glass (BG_Ca) with a reduced tendency to crystallize compared to the widely used 45S5 Bioglass®. The rich glassy phase, which can be preserved during the thermal treatment, has excellent effects in terms of in vitro bioactivity; moreover, compared to composites based on 45S5 Bioglass® having the same HA/glass proportions, the samples based on BG_Ca displayed an earlier response in terms of cell proliferation.     

High Temperature Oxidation and Microstructural Evolution of Modified MCrAlY Coatings

Thermal sprayed MCrAlY coatings are widely used as a bond coat in thermal barrier systems to protect the substrate from corrosion and high temperature oxidation and to improve the compatibility between the ceramic top coat and metallic substrate. In this paper, the high temperature oxidation resistance of MCrAlY coatings with modified compositions was evaluated; in particular, the effect of the addition of reactive and refractory elements (Ta, Re, Si, and Hf) was investigated. MCrAlY coatings were obtained by high velocity oxygen fuel spray and vacuum plasma spray techniques; samples were exposed to air at 1423 K (1150 °C) and the oxidation kinetics were evaluated by measuring the thickness of the thermally grown oxide (TGO) scale at several exposure times. Experimental data confirmed that the oxidation resistance of MCrAlY coatings is strictly related to the amount of the reactive and refractory elements in the starting powders and that a thorough understanding of the microstructural modifications taking place during oxidation is essential for controlling TGO growth and thermal barriers’ durability.