Reliability and mechanical durability tests of flexible OLED with ALD coating

To improve the reliability and mechanical durability of a flexible organic light‐emitting diode display, the entire flexible display is coated with an aluminum oxide film by atomic layer deposition (ALD). Because the step coverage of ALD is excellent, the AlO_x film was deposited not only on the front and back surfaces but also on the side surfaces of the display. A high‐temperature and high‐humidity preservation test, repetitive bending tests, and a pencil hardness test were conducted on the flexible display with ALD‐AlO_x coating. The display survived 500 h of a 65°C, 95% preservation test, endured a 100,000‐time repetitive bending test with a curvature radius of 4 mm, and was found to have a pencil hardness of 4H.     

Design of a Four-Element, Hollow-Cube Corner Retroreflector for Satellites by use of a Genetic Algorithm

A four-element retroreflector was designed for satellite laser ranging and Earth-satellite-Earth laser long-path absorption measurement of the atmosphere. The retroreflector consists of four symmetrically located corner retroreflectors. Each retroreflector element has curved mirrors and tuned dihedral angles to correct velocity aberrations. A genetic algorithm was employed to optimize dihedral angles of each element and the directions of the four elements. The optimized four-element retroreflector has high reflectance with a reasonably broad angular coverage. It is also shown that the genetic algorithm is effective for optimizing optics with many parameters.     

On the electrochemical activation of alkali-treated soft carbon for advanced electrochemical capacitors

The electrochemical activation process of the so-called “alkali-treated soft carbon” (ASC) has been examined in organic electrolyte solutions. SEM observation demonstrated that the edge plane of graphene structure of the ASC particle becomes rough after the activation, and XRD measurements indicated that the average lattice constant of graphene stacking in ASC increases after the activation process. Ex-situ ⁷Li NMR measurements proved that the insertion of cation (Li⁺) into the pore structure of ASC is associated with the activation process in the electrolyte dissolving Li salt. The pore-size distribution determined from N₂-gas adsorption for ASC electrodes before and after the electrochemical activation indicates that the pore structure becomes developed after the electrochemical polarization, especially in the pore-diameter range of 2–10 nm. A schematic model of the activation process has been presented, which includes electrochemical insertion of ions into the inside of the ASC.     

Neutron energy dependence of delayed neutron yields and its assessments

Incident neutron energy dependence of delayed neutron yields of uranium and plutonium isotopes is investigated. A summation calculation of decay and fission yield data is employed, and the energy dependence of the latter part is considered in a phenomenological way. Our calculation systematically reproduces the energy dependence of delayed neutron yields by introducing an energy dependence of the most probable charge and the odd–even e?ect. The calculated fission yields are assessed by comparison with JENDL/FPY-2011, delayed neutron activities, and decay heats. Although the fission yields in this work are optimized to delayed neutron yields, the calculated decay heats are in good agreement with the experimental data. Comparison of the fission yields calculated in this work and JENDL/FPY-2011 gave an important insight for the evaluation of the next Japanese evaluated nuclear data library (JENDL) .     

X-ray absorption fine structure combined with fluorescence spectrometry for monitoring trace amounts of lead adsorption in the environmental conditions

The local structure of trace amounts of lead in an adsorbent matrix that contains a high concentration of iron and magnesium (Mg6Fe2(OH)16(CO3) x 3H2O) was successfully monitored by means of X-ray absorption fine structure spectroscopy combined with fluorescence spectrometry. A eutectic mixture of PbCO3 and Pb(OH)2 coagulated when Pb2+ was adsorbed from a 1.0 ppm aqueous solution, and in contrast, the major species was ion-exchanged Pb2+ in the case of adsorption from a 100 ppb aqueous solution. The difference was ascribed to the balance between the precipitation equilibrium for coagulation and the rate of the ion exchange reaction with surface hydroxyl groups.     

Diffuse biliary tract involvement mimicking primary sclerosing cholangitis in an experimental model of chronic graft-versus-host disease in mice

In a previous study, protein components purified from latex gloves that elicited allergenic reactions were characterized by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and yielded apparent molecular weights of 14, 22, 30, 34, 46, and 58 kD. These allergenic components were isolated for further characterization by capillary zone electrophoresis and N-terminal amino acid sequence analysis. These components all migrated at approximately 25 and 35 min on capillary zone electrophoresis. Diode array spectral analysis detected indistinguishable characteristics between these two protein peaks. In addition, complex formation of these components with patients' immunoglobulin was demonstrated by capillary zone electrophoresis. Analysis of components separated by SDS-PAGE on a polyvinylidene difluoride membrane showed that the first 13 residues were identical to the sequence of hevein. Based on the criteria of charge-to-mass ratio and N-terminal amino acid sequence, our results suggest that these components of latex proteins are similar in the primary structure.     

Ingestion of plasmalogen markedly increased plasmalogen levels of blood plasma in rats

Plasmalogens, a subclass of phospholipids, are widely distributed in human and animals, and are taken into the body as food. However, no data exist on the intestinal absorption or fate of ingested plasmalogen. Here, we determined whether dietary plasmalogen is absorbed and whether blood and tissue concentrations increased in normal male Wistar rats by using four separate experiments. Phospholipids containing more than 20 wt% of plasmalogen extracted from the bovine brain were incorporated into test diets (10–15 wt%). In experiment 1, we estimated the absorption rate by measuring the plasmalogen vinyl ether bonds remaining in the alimentary tract of rats after the ingestion of 2 g of test diet containing 91 μmol plasmalogen. The absorption rate of plasmalogen was nearly 80 mol% after 4 h, comparable to the total phospholipid content in the test diet. In experiment 2, we observed no degradation of the plasmalogen vinyl ether bonds under in vitro conditions simulating those of the stomach and small intestinal lumen. In experiment 3 we confirmed a comparable absorption (36 mol%) by using a closed loop of the upper small intestine in anesthetized rats 90 min after injecting a 10 wt% brain phospholipid emulsion. Feeding a test diet containing 10 wt% brain phospholipids for 7 d increased plasmalogen concentration threefold in blood plasma and by 25% in the liver; however, no increases were seen in blood cells, skeletal muscle, brain, lungs, kidneys, or adipose tissue (experiment 4). We concluded that dietary plasmalogen is absorbed from the intestine and contributes to a large increase in plasmalogen levels in blood plasma.     

Optical design of a hollow cube-corner retroreflector for a geosynchronous satellite

The optical characteristics of a single-element hollow cube-corner retroreflector for a geosynchronous satellite were numerically evaluated for laser ranging and laser long-path absorption measurements of atmospheric species. An optical design with spherical surfaces and tuned dihedral angles was considered to compensate for velocity aberrations. The parameters for the retroreflector were optimized with genetic algorithms for different retroreflector sizes and wavelengths (500 nm and 1, 3, and 10 mum). We found that 20-cm retroreflectors are sufficient for realistic measurements when the laser wavelength is 500 nm or 1 mum. However, a larger retroreflector is necessary to overcome the detector noise level at 3 and 10 mum.     

Demonstration of 80-km-Long SMF Transmission on Time-Spread Wavelength-Hopping-Type OCDM With Dispersion Compensators

We demonstrate the novel dispersion compensation for time-spread/wavelength-hop (TS-WH) optical code-division multiplexing (OCDM). The single-mode-fiber transmission, up to 80 km long, on TS-WH OCDM was achieved by a combination of the dispersion-compensated decoder and the multichannel-type dispersion-slope compensator.