Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target

Structure modification has been found to tune significantly the transparent-conducting performance, especially mobility and conductivity of hydrogenated Ga-doped ZnO (HGZO) films. The strong correlation between film thickness and mobility of the films is revealed. The mobility increases quickly with increasing the thickness from 350 to 900 nm, and then tends to be saturated at further thicknesses. A higher mobility than 50 cm²/Vs can be achieved, which is an extra-high value for polycrystalline ZnO films deposited by using the sputtering technique. The thickness-dependent mobility originates from scatterings on grain boundaries and dislocation-induced defects controlled by thin-film growth. Based on the Volmer-Weber model, an expansion model is built up to describe the thickness-dependent crystal growth of the HGZO films, especially at the thick films. As a result, the 800 nm-thick HGZO film obtains the highest performance with high mobility of 51.5 cm²/Vs, low resistivity of 5.3 × 10^?4 Ωcm, and good transmittance of 83.3 %.     

Synthesis and Application of Novel Nano Fe-BTC/GO Composites as Highly Efficient Photocatalysts in the Dye Degradation

Topics in Catalysis - Nano Fe-BTC/graphene oxide (GO) composites were successfully synthesized by hydrothermal treatment with a microwave-assisted method. Samples were characterized by X-ray...     

Thin-gate oxides prepared by pure water anodization followed byrapid thermal densification

Anodic oxidation at room temperature with pure deionized water as electrolyte and then followed by high-temperature rapid thermal densification was used to prepare high breakdown endurance thin-gate oxides with thicknesses of about 50 Å. It was observed that the oxides prepared by anodic oxidation followed by rapid thermal densification (AOD) show better electrical characteristics than those grown by rapid thermal oxidation (RTO) only. The AOD oxides have a very low midgap interface trap density, Ditm, of smaller than 1×10¹⁰ eV^-1 cm^-2 and negative effective oxide trapped charge. From the smaller leakage currents observed during staircase ramp voltage time-zero dielectric breakdown (TZDB) and constant field time-dependent dielectric breakdown (TDDB) testings, it is supposed that the uniform interfacial property and the pretrapped negative charges in AOD oxides are responsible for the improved characteristics     

Gate and drain currents in off-state buried-type p-channel LDDMOSFETs

The buried-type p-channel LDD MOSFETs biased at high positive gate voltage exhibit novel characteristics: (1) the ratio of the drain to gate currents is about 1×10^-3 to 5×10^-3; and (2) the gate and drain currents both are functions of only the gate voltage minus the n-well bias. Such characteristics are addressed based on the formation of the surface n ⁺ inversion layer due to the punchthrough of the buried channel to the underlying shallow p-n junction. The measured gate current is due to the Fowler-Nordheim tunneling of electrons from this inversion layer surface and the holes generated within the high-field oxide constitute the drain current. The n⁺ inversion layer surface potential is found to be equal to the n-well bias plus 0.55 V. As a result, both the oxide field and the gate and drain currents are independent of drain voltage     

Design model and guidelines for n-well guard ring in epitaxial CMOS

This work reports the development of design model for n-well guard rings in a CMOS process utilizing a low-doped epitaxial layer on a highly doped substrate. The validity of the model has been judged by a wide range of experimental data measured from the fabricated n-well guard ring structures with guard ring width as parameter. From the model developed, guidelines have been drawn to minimize the guard ring width while critically suppressing the amount of electrons escaping from the guard ring     

Integrating local action elements for action analysis

In this paper, we propose a framework for human action analysis from video footage. A video action sequence in our perspective is a dynamic structure of sparse local spatial–temporal patches termed action elements, so the problems of action analysis in video are carried out here based on the set of local characteristics as well as global shape of a prescribed action. We first detect a set of action elements that are the most compact entities of an action, then we extend the idea of Implicit Shape Model to space time, in order to properly integrate the spatial and temporal properties of these action elements. In particular, we consider two different recipes to construct action elements: one is to use a Sparse Bayesian Feature Classifier to choose action elements from all detected Spatial Temporal Interest Points, and is termed discriminative action elements. The other one detects affine invariant local features from the holistic Motion History Images, and picks up action elements according to their compactness scores, and is called generative action elements. Action elements detected from either way are then used to construct a voting space based on their local feature representations as well as their global configuration constraints. Our approach is evaluated in the two main contexts of current human action analysis challenges, action retrieval and action classification. Comprehensive experimental results show that our proposed framework marginally outperforms all existing state-of-the-arts techniques on a range of different datasets.     

Personalized identification of abdominal wall hernia meshes on computed tomography

An abdominal wall hernia is a protrusion of the intestine through an opening or area of weakness in the abdominal wall. Correct pre-operative identification of abdominal wall hernia meshes could help surgeons adjust the surgical plan to meet the expected difficulty and morbidity of operating through or removing the previous mesh. First, we present herein for the first time the application of image analysis for automated identification of hernia meshes. Second, we discuss the novel development of a new entropy-based image texture feature using geostatistics and indicator kriging. Third, we seek to enhance the hernia mesh identification by combining the new texture feature with the gray-level co-occurrence matrix feature of the image. The two features can characterize complementary information of anatomic details of the abdominal hernia wall and its mesh on computed tomography. Experimental results have demonstrated the effectiveness of the proposed study. The new computational tool has potential for personalized mesh identification which can assist surgeons in the diagnosis and repair of complex abdominal wall hernias.     

Design and control of reactive distillation for ethyl and isopropyl acetates production with azeotropic feeds

Reactive distillations for the production of ethyl acetate (EtAc) and isopropyl acetate (IPAc) are classified as the type-II process where the first column consists of a reactive zone and a rectifying section followed by a stripper [Tang et al., 2005. Design of reactive distillations for acetic acid esterification with different alcohols. A.I.Ch.E. Journal 51, 1683-1699]. Instead of using pure alcohols and acetic acid as reactants, this paper studies the effects of reactant purity on the design and control of reactive distillation. This offers significant economical incentives (by reducing raw materials costs), because ethanol forms an azeotrope with water at 90 mol% and isopropanol/water has an azeotrope at 68%. The purities of the acid is set to 95% for acetic acid (industrial grade), 87% for ethanol, and 65% for isopropanol. The results show that the total annual costs (TAC) increase by a factor of 5% for EtAc and 8% for IPAc production using reactive distillation. Next, the operability of the reactive distillations with azeotrope feeds is explored. Three disturbances, feed flow, acid feed purity, and alcohol feed composition, are introduced to assess control performance using dual-temperature control and one-temperature-one-composition control. Simulation results indicate good control performance can be achieved for reactive distillation with azeotropic feeds.