The assessment of ceramic and mixed recycled aggregates for high strength and low shrinkage concretes

Very few studies on recycled aggregate concretes (RC) have been extended to the use of recycled ceramic and mixed aggregates in relation with high strength concretes. In the main they concentrate only on the analysis of the physical and mechanical properties. This study deals with the investigation of the influence that different percentages (up to 30% substitution for natural aggregates) of high porous ceramic and mixed recycled aggregates have over the plastic, autogenous and drying shrinkage of the concretes. The physical and mechanical properties as well as the chloride resistance were also determine in order to assess the viability of the use of ceramic and mixed recycled aggregates in high strength concretes. The results revealed that the employment of highly porous recycled aggregates reduced the plastic and autogenous shrinkage values of the concrete with respect to those obtained by conventional concrete (CC). Although the total drying shrinkage of the recycled concrete proved to be 25% higher than that of the CC concrete, the CC concrete had in fact a higher shrinkage value than that of the RC from 7 to 150 days of drying. It can be concluded that the RC concrete produced employing up to 30% of fine ceramic aggregates (FCA, with 12% of absorption capacity) achieved the lowest shrinkage values and higher mechanical and chloride ion resistance. In addition, the concrete produced with low percentage (10–15%) of recycled mixed aggregates also had similar properties to conventional concrete.     

Influence of the processing parameters and composition on the thermal stability of PLA/nanoclay bio‐nanocomposites

Poly(lactic acid) (PLA) is one the most promising bio‐based and biodegradable polymer. However, its low thermal stability limits the range of applications and complicates its transformation via the most industrial common processes. The novelty of this work is studying the thermal stability of PLA and PLA/clay nanocomposites during use, as a function of the composition and using a wide range of extrusion and injection moulding processing parameters. To improve the thermal stability of the PLA, laminar silicates containing different organomodifications have been added (Cloisite 20A and Cloisite 30B). The results show that the processing conditions and composition define the morphology of the bio‐nanocomposites, which plays key role in defining final thermal properties of the material. In general, clays improve the thermal stability of the processed material, increasing the degradation temperature and decreasing the degradation rate under a wide range of processing conditions. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40747.     

Illicit drug consumption estimations derived from wastewater analysis: A critical review

The consumption of illicit drugs causes indisputable societal and economic damage. Therefore it is necessary to know their usage levels and trends for undertaking targeted actions to reduce their use. Recently, a new approach (namely sewage epidemiology) was developed for the estimation of illicit drug use based on measurements of urinary excreted illicit drugs and their metabolites in untreated wastewater. This review aims at critically evaluating the published literature and identifying research gaps of sewage epidemiology. Firstly, the existing analytical procedures for the determination of the four most used classes of illicit drugs worldwide (cannabis, cocaine, opiates and amphetamine-like stimulants) and their metabolites in wastewater are summarized and discussed. The focus lies on the sample preparation and on the analysis with chromatographic techniques coupled to mass spectrometry. Secondly, back-calculations used to transform measured concentrations in wastewater (in ng/L) into an amount of used illicit drug (in g/day per 1000 inhabitants or doses/day per 1000 inhabitants) are discussed in detail for the four groups of illicit drugs. Sewage epidemiology data from Spain, Belgium, UK, Italy, Switzerland and USA are summarized and compared with data from international organisations, such as the European Monitoring Centre for Drug and Drug Addiction (EMCDDA) and the United Nations Office on Drugs and Crime (UNODC). The results derived from wastewater analysis show in general good agreement with existing prevalence data (percentage of a population that uses illicit drugs at a given time) and demonstrate the potential of sewage epidemiology. However, this review confirms that future work should focus on further optimisation and standardisation of various important parameters (e.g. sample collection and back-calculations). In the future, sewage epidemiology could be used in routine drug monitoring campaigns as a valuable tool in addition to the classical socio-epidemiological studies for the determination of local, national and international illicit drug use.     

Peroxisome proliferation as a biomarker in environmental pollution assessment

Peroxisome proliferators comprise a heterogeneous group of compounds known for their ability to cause massive proliferation of peroxisomes and liver carcinogenesis in rodents. In recent years it has become evident that other animals may be threatened by peroxisome proliferators, in particular aquatic organisms living in coastal and estuarine areas. These animals are exposed to a variety of pollutants of industrial, agricultural and urban origin which are potential peroxisome proliferators. Both laboratory and field studies have shown that phthalate ester plasticizers, PAHs and oil derivatives, PCBs, certain pesticides, bleached kraft pulp and paper mill effluents, alkylphenols and estrogens provoke peroxisome proliferation in different fish or bivalve mollusc species. The response appears to be mediated by peroxisome-proliferator activated receptors, members of the nuclear receptor family, recently cloned in fish. Based on these results it is proposed that peroxisome proliferation could be used as a biomarker of exposure to a variety of pollutants in environmental pollution assessment. This is illustrated by a case study in which mussels, used worldwide as sentinels of environmental pollution, were transplanted from reference to contaminated areas and vice versa. In mussels native to an area polluted with PAHs and PCBs, peroxisomal acyl-CoA oxidase (AOX) activity and peroxisomal volume density were 2-3 fold and 5-fold higher, respectively, compared to the reference site. When animals were transplanted to the polluted station, with increased concentration of organic xenobiotics, a concomitant significant increase of AOX was recorded. Conversely, in animals transplanted to the cleaner station, AOX activity and peroxisomal volume density decreased significantly. These results indicate that peroxisome proliferation is a rapid (i.e., two days) and reversible response to pollution in mussels. Before peroxisome proliferation can be implemented as a biomarker in biomonitoring programs, a well-defined protocol should be established and validated in intercalibration and quality assurance programmes. Furthermore, the influence of biotic and abiotic factors, some of which are known to affect peroxisome proliferation (season, tide level, interpopulation and interindividual variability), should be taken into consideration. The possible hepatocarcinogenic effects as well as the potential adverse effects on reproduction, development, and growth of peroxisome proliferators are unknown in aquatic organisms, thus providing a challenge for future investigations.     

Application of interrupted cooling experiments to study the mechanism of bainitic ferrite formation in steels

New interrupted cooling experiments have been designed to study the kinetics of bainitic ferrite formation starting from a mixture of austenite and bainitic ferrite. It is found that the kinetics of bainitic ferrite formation during the cooling stage is determined by the isothermal holding time. The formation rate of bainitic ferrite at the beginning of the cooling decreases with increasing prior isothermal holding time. An unexpected stagnant stage during the cooling stage appears when the isothermal holding time increases to a critical point. There are two reasons for the occurrence of the stagnant stage: (i) a solute spike in front of the interface; and (ii) kinetic transition. A so-called Gibbs energy balance approach, in which the dissipation of Gibbs energy due to diffusion inside the interface and interface friction is assumed to be equal to the available chemical driving force, is applied to theoretically explain the stagnant stage. A kinetics transition from a fast growth mode without diffusion of Mn and Si inside the austenite–bainitic ferrite interfaces to a slow growth mode with diffusion inside the interface is predicted. The stagnant stage is caused by the transition to a slow growth mode. The Gibbs energy balance approach describes the experimental observations very well.     

Application of different macrokinetic models to the isothermal crystallization of PP/talc blends

The crystallization kinetics of neat polypropylene (PP) and of PP composites containing 2, 5, 10 and 30 wt% of talc was studied. Various kinetic equations, namely the Avrami, Velisaris–Seferis, Dietz, Khanna, Malkin models, have been applied to describe the kinetics of crystallization from the melt state under isothermal conditions. The results suggested that experimental data of the Avrami’s exponent, “n”, is approximately 2, meaning that the crystallization of PP alone and of its composites with talc is a two-dimensional growth process. Experimental data of PP alone can be best described by the Avrami, Velisaris–Seferis, Dietz and Malkin models; whereas the models that in the case of composites better correlate their behavior are those of Velisaris–Seferis, followed by Avrami’s.     

Aromatic DNA adducts in relation to dietary and other lifestyle factors in Spanish adults

The aim of this study was to assess the relationship between bulky DNA adducts in white blood cells (WBC) and lifestyle factors in a sample from the Spanish cohort of the European Prospective Investigation into Cancer and Nutrition (EPIC). 296 subjects aged between 35 and 64 years, from five regions, were included. Food intake was estimated with a computerized version of dietary history questionnaire. Daily intake of polycyclic aromatic hydrocarbons (PAH) was estimated using a database with information on food content of potential carcinogens. Data on lifestyle and health factors were collected and DNA adducts measured using the nuclease P1 ³²P-postlabelling technique. Geometric means of adducts were similar for men and women (4.11/10⁹ and 3.94/10⁹ nucleotides, respectively). Highest levels of adduct were observed in non-smokers and non-occupationally exposed. Meat intake, oils and fats were associated with higher levels of adducts, but all non-statistically significant. Higher intakes of calcium, sodium and phosphorus were associated with lower adducts levels. Summarising, our study shows that bulky adducts measured by ³²P-postlabelling in DNA from WBC do not correlate with the usual diet of healthy Spanish adults. Although it has been proposed that diet be the main source of PAH in nonsmokers without occupational exposure, DNA adducts do not seem to be suitable biomarkers of dietary PAH in general population.     

Tuning Memristivity by Varying the Oxygen Content in a Mixed Ionic–Electronic Conductor

The rising interest shown for adaptable electronics and brain‐inspired neuromorphic hardware increases the need for new device architectures and functional materials to build such devices. The rational design of these memory components also benefits the comprehension and thus the control over the microscopic mechanisms at the origin of memristivity. In oxide‐based valence‐change memories, the control of the oxygen drift and diffusion kinetics is a key aspect in obtaining the gradual analog‐type change in resistance required for artificial synapse applications. However, only a few devices are designed with this in mind, as they are commonly built around ionic insulating active materials. This shortcoming is addressed by using a mixed ionic–electronic conductor as functional memristive material. This work demonstrates how the oxygen content in La₂NiO_4+δ (L2NO4), tuned through post‐annealing treatments, has a critical influence on the memory characteristics of L2NO4‐based memristive devices. The presence of interstitial oxygen point defects in L2NO4 affects both its structure and electrical properties. High oxygen stoichiometry in the pristine state leads to an increased electrical conductivity, ultimately resulting in an improved memory window with highly multilevel, analog‐type memory programing capabilities, desirable for analog computing and synaptic applications in particular.     

Comprehensive numerical modelling of the hot isostatic pressing of Ti-6Al-4V powder: From filling to consolidation

Hot Isostatic Pressing (HIP) is a manufacturing process for production of near-net-shape components, where models based on Finite Element Method (FEM) are generally used for reducing the expensive experimental trials for canister design. Researches up to date implement in the simulation a uniform powder relative density distribution prior HIPping. However, it has been experimentally observed that the powder distribution is inhomogeneous after filling, leading to a non-uniform tool shrinkage. In this study a comprehensive numerical model for HIPping of Ti-6Al-4V powder is developed to improve model prediction by simulating powder filling and pre-consolidation by means of a two-dimensional Discrete Element Method (DEM). Particles’ dimension has been scaled up in order to reduce the computational cost of the analysis. An analytical model has been developed to calculate the relative density distribution from powder particle distribution provided by DEM, which is then passed in information to a three-dimensional FEM implementing the Abouaf and co-workers model for simulating powder densification during HIPping. Results obtained implementing the initial relative density distribution calculated from DEM are compared with those obtained considering a uniform relative density distribution over the powder domain (classic approach) at the beginning of the analysis. Experimental work has been carried out for validating the DEM (filling) and FEM (HIP) model. Comparison between experimental and numerical results shows the ability of the DEM model to represent the powder flow during filling and pre-consolidation, providing also a reliable values of the relative density distribution. It also highlights that taking into account the non-uniform powder distribution inside the canister prior HIP is vital to improve numerical results and produce near-net-shape components.     

Assessing the effects of hydrological and chemical stressors on macroinvertebrate community in an Alpine river: The Adige River as a case study

In this study, the combined effects of hydrological and chemical stressors on benthic macroinvertebrates were evaluated in order to explore the response of the biological community to multiple stressors. The Adige River, located in the south‐eastern Alps, was selected as a case study because representative of the situation of a large river in which the variety of stressors present in the Alpine region act simultaneously. As expected, streamflow showed a seasonal pattern, with high flows in the spring–summer period; however, locally, the natural hydrological regime was altered by the presence of hydropower systems, which chiefly affected low flows. Multivariate analysis showed seasonal and spatial patterns in both chemical and hydrological parameters with a clear gradient in the concentration of nitrate, personal care, and pharmaceutical products moving from headwaters to the main stem of the river. The macroinvertebrate community composition was significantly different in summer and winter and between up and downstream sites. Streamflow alteration chiefly due to water use by hydropower affected community composition but not richness or diversity. Gammarus sp., Hirudinea, and Psychomyia sp., were positively correlated with flow variability, increasing their densities in the sites with higher streamflow variability because of hydropeaking. The results obtained in this study show that the composition of the macroinvertebrate community responded to seasonality and to changes in the main stressors along the river and highlights the importance of the spatial and temporal variability of stressors in this Alpine river. Taking into account, this variability will help the decision‐making process for improving basin management.