Comparative techno-economic assessment of a large-scale hydrogen transport via liquid transport media

A large-scale point to point hydrogen transport is one strategy for a prospective energy import scenario for certain countries. The case for a hydrogen transport from Australia to Japan has been addressed in several studies. However, most studies lack transparency and detailed insights into the made assumptions thus a fair evaluation of different transport pathways is challenging. To address this issue, we developed a model where a large-scale point to point hydrogen transport of liquid hydrogen is compared with the transport via liquid organic hydrogen carrier (LOHC), namely via methyl cyclohexane and hydrogenated dibenzyl toluene. We analyzed, where energy is required along the different pathways, where hydrogen losses do occur and how the costs are put together. Furthermore, the influence of hydrogen feed costs is also considered. For hydrogen production costs of 5 €₂₀₁₈/kg_H2 the total delivery costs are in the range of 6.40– 8.10 €₂₀₁₈/kg_H2.     

A 100-GOPS programmable processor for vehicle vision systems

New generations of automobiles will include driver assistance systems requiring powerful, low-cost processors to handle video/camera applications and to enable fast, convenient application development. Shrinking feature sizes on processors already in development will bring substantial increases in system speed and functionality.     

The effect of specific β‐nucleation on morphology and mechanical behavior of isotactic polypropylene

The commercial grade of isotactic polypropylene was modified by a specific β‐nucleating agent in a broad concentration range. The supermolecular structure of the specimens prepared by injection molding was characterized by X‐ray scattering and correlated with mechanical behavior. It was found that at a critical nucleant concentration of 0.03 wt % the content of the β‐modification virtually reaches a saturation level. With further addition of the nucleant, the β‐phase content increases only slightly. The long period passes through a distinct maximum at the same nucleant concentration. This singularity in structure remarkably correlates with a minimum of the yield stress and maxima of strain at break and fracture toughness. Such general behavior is also reflected in the correlation between the β‐phase concentration and fracture toughness profiles along the injection‐molded bars. It is suggested that in the critically nucleated material an optimum thickness of the amorphous interlayer with connecting chains between the β‐crystallites is established, rendering the material the highest possible ductility and toughness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1174–1184, 2002     

Effect of substrate surface roughness on the adherence of NiCrAlY thermal spray coatings

The adherence of plasma sprayed NiCrAlY bond coats can be improved by an appropriate substrate surface finish. The interface fracture energy for crack propagation along the coating/substrate interface has been measured for different surface roughness by means of a specially designed four-point bending test. An increase of the interface fracture energy of about 15% was observed for a three times higher surface roughness. In addition, four-point bending tests with the coating on the side face of bending specimens were performed to analyze the fracture and spalling behavior of the coatings both under large tensile and compressive substrate deformations.     

Measured limits to contamination of optical surfaces by elastomers in vacuum

We have monitored the reflectivity of mirrors that were exposed to a fluoroelastomer (3M-Fluorel 2176) and a room-temperature vulcanizing silicone rubber (RTV-615) in vacuum. The 95% confidence limit on the decrease of mirror reflectivities was less than 0.35 ppm/week for Fluorel and <0.29 ppm/week for RTV-615.     

Structure formation in grade 20 steel during equal-channel angular pressing and subsequent heating

The structure formation and the mechanical properties of quenched and tempered grade 20 steel after equal-channel angular pressing (ECAP) at various true strains and 400°C are studied. Electron microscopy analysis after ECAP shows a partially submicrocrystalline and partially subgrain structure with a structural element size of 340–375 nm. The structural element size depends on the region in which the elements are formed (polyhedral ferrite, needle-shaped ferrite, tempered martensite, and pearlite). Heating of the steel after ECAP at 400 and 450°C increases the fraction of high-angle boundaries and the structural ferrite element size to 360–450 nm. The fragmentation and spheroidization of cementite lamellae of pearlite and subgrain coalescence in the regions of needle-shaped ferrite and tempered martensite take place at a high ECAP true strain and heating temperature. Structural refinement ensures considerable strengthening, namely, UTS 742–871 MPa at EL 11–15.3%. The strength slightly increases, whereas the plasticity slightly decreases when the true strain increases during ECAP. After ECAP and heating, the strength and plastic properties of the grade 20 steel remain almost the same.     

Strips of hourly power options—Approximate hedging using average-based forward contracts

We study approximate hedging strategies for a contingent claim consisting of a strip of independent hourly power options. The payoff of the contingent claim is a sum of the contributing hourly payoffs. As there is no forward market for specific hours, the fundamental problem is to find a reasonable hedge using exchange-traded forward contracts, e.g. average-based monthly contracts. The main result is a simple dynamic hedging strategy that reduces a significant part of the variance. The idea is to decompose the contingent claim into mathematically tractable components and to use empirical estimations to derive hedging deltas. Two benefits of the method are that the technique easily extends to more complex power derivatives and that only a few parameters need to be estimated. The hedging strategy based on the decomposition technique is compared with dynamic delta hedging strategies based on local minimum variance hedging, using a correlated traded asset.     

High percentage inorganic arsenic content of mining impacted and nonimpacted Chinese rice

Two approaches were undertaken to characterize the arsenic (As) content of Chinese rice. First, a national market basket survey (n = 240) was conducted in provincial capitals, sourcing grain from China's premier rice production areas. Second, to reflect rural diets, paddy rice (n = 195) directly from farmers fields were collected from three regions in Hunan, a key rice producing province located in southern China. Two of the sites were within mining and smeltery districts, and the third was devoid of large-scale metal processing industries. Arsenic levels were determined in all the samples while a subset (n = 33) were characterized for As species, using a new simple and rapid extraction method suitable for use with Hamilton PRP-X100 anion exchange columns and HPLC-ICP-MS. The vast majority (85%) of the market rice grains possessed total As levels < 150 ng g(-1). The rice collected from mine-impacted regions, however, were found to be highly enriched in As, reaching concentrations of up to 624 ng g(-1). Inorganic As (As(i)) was the predominant species detected in all of the speciated grain, with As(i) levels in some samples exceeding 300 ng g(-1). The As(i) concentration in polished and unpolished Chinese rice was successfully predicted from total As levels. The mean baseline concentrations for As(i) in Chinese market rice based on this survey were estimated to be 96 ng g(-1) while levels in mine-impacted areas were higher with ca. 50% of the rice in one region predicted to fail the national standard.