Improvement of emission efficiency in polymer light-emitting devices based on phosphorescent polymers

We report improvement of emission efficiency in polymer light-emitting devices (PLEDs) employing phosphorescent polymers. A hole-blocking layer was inserted between the emissive layer and the cathode to enhance recombination efficiency for the injected holes and electrons. Aluminum(III)bis(2-methyl-8-quinolinato)4-phenylphenolato (BAlq) was used for the hole-blocking layer. The resultant PLEDs exhibited significant improvement of emission efficiency. The respective external quantum efficiencies for red, green and blue PLEDs were 6.6, 11 and 6.9%. These values are very high compared with those based on conventional fluorescent polymers.     

Recovery retardation in equal channel angular pressed Al–Zr alloy during friction stir welding

The effect of Zr on reduction of hardness and microstructure in an FS weld of equal channel angular-pressed Al alloy was investigated. Zr addition to Al suppressed dynamic recovery in the thermomechanically affected zone and enabled retention of the high hardness of the ECA-pressed material throughout the weld.     

IMPINGING JET DRYER

In coating and gravure printing, an impinging jet nozzle with high thermal efficiency for drying of coated film was developed.

Trial production 0f 40 kinds of nozzle enables to develop a high-performance impinging jet nozzle with heat transfer coefficient 1.5 times larger than that of current slit nozzle, through measurement of heat transfer coefficient, visualizations of air flow and heat transfer, and measuremenu of jet velocity and turbulence distribution. The purpose of the trial production was to expand a range of high heat transfer and promote turbulence compared with the current nozzle.

Paying attention to mass transfer within gravure ink coated film, drying characteristic of the film was analyzed by numerical solution of a set of equations governing the drying process in which concentration dependencies 0f the diffusion coefficient and the equilibrium vapor pressure were considered.

Applying these analyses. an industrial scale dryer with excellent drying efficiency has finally been developed.     

Generalized theorems on relationships among reducibility notions to certain complexity classes

In this paper we give several generalized theorems concerning reducibility notions to certain complexity classes. We study classes that are either (I) closed under NP many-one reductions and polynomial-time conjunctive reductions or (II) closed under coNP many-one reductions and polynomial-time disjunctive reductions. We prove that, for such a classK, (1) reducibility notions of sets toK under polynomial-time constant-round truth-table reducibility, polynomial-time log-Turing reducibility, logspace constant-round truth-table reducibility, logspace log-Turing reducibility, and logspace Turing reducibility are all equivalent and (2) every set that is polynomial-time positive Turing reducible to a set inK is already inK.From these results, we derive some observations on the reducibility notions to C₌P and NP.     

Extraction and implementation of muscle synergies in neuro-mechanical control of upper limb movement

This work faces the redundancy problem, a central concern in robotics, in a particular force-producing task by using muscle synergies to simplify the control. We extracted muscle synergies from human electromyograph signals and interpreted the physical meaning of the identified muscle synergies. Based on the human analysis results, we hypothesized a novel control framework that can explain the mechanism of the human motor control. The framework was tested in controlling a pneumatic-driven robotic arm to perform a reaching task. This control method, which uses only two synergies as manipulated variables for driving antagonistic pneumatic artificial muscles to generate desired movements, would be useful to deal with the redundancy problem; thus, suggesting a simple but efficient control for human-like robots to work safely and compliantly with humans.     

Fabrication of 5.8‐in. OTFT‐driven flexible color AMOLED display using dual protection scheme for organic semiconductor patterning

Abstract— A 5.8‐in. wide‐QQVGA flexible color active‐matrix organic light‐emitting‐diode (AMOLED) display consisting of organic thin‐film transistors (OTFTs) and phosphorescent OLEDs was fabricated on a plastic film. To reduce the operating voltage of the OTFTs, Ta₂O₅ with a high dielectric constant was employed as a gate insulator. Pentacene was used for the semiconductor layer of the OTFTs. This layer was patterned by photolithography and dry‐etched using a dual protection layer of poly p‐xylylene and SiO₂ film. Uniform transistor performance was achieved in the OTFT backplane with QQVGA pixels. The RGB emission layers of the pixels were formed by vacuum deposition of phosphorescent small molecules. The resulting display could clearly show color moving images even when it was bent and operated at a low driving voltage (below 15 V).     

Space-efficient recognition of sparse self-reducible languages

Mahaney and others have shown that sparse self-reducible sets have time-efficient algorithms, and have concluded that it is unlikely that NP has sparse complete sets. Mahaney's work, intuition, and a 1978 conjecture of Hartmanis notwithstanding, nothing has been known about the density of complete sets for feasible classes until now. This paper shows that sparse self-reducible sets have space-efficient algorithms, and in many cases, even have time-space-efficient algorithms. We conclude that NL, NC ^k , AC ^k , LOG(DCFL), LOG(CFL), and P lack complete (or even Turing-hard) sets of low density unless implausible complexity class inclusions hold. In particular, if NL (respectively P, _k , or NP) has a polylog-sparse logspace-hard set, then NLSC (respectively PSC, _k , or PHSC), and if P has subpolynomially sparse logspace-hard sets, then PPSPACE.     

Evaluation of Desulphurization Flux in CaO‐Al2O3‐BaO‐CeO2‐MgO System

The flux of the CaO‐Al₂0₃‐BaO‐CeO₂‐MgO system as a desulphurization flux containing no fluorine for the secondary metallurgy process was evaluated in this study. The flux composition was designed using the eutectic compositions of the binary systems. The melting and desulphurization abilities of the fluxes were evaluated by measuring their liquidus temperatures and the distribution ratios of sulphur between the fluxes and the carbon‐saturated iron or stainless steel. The lowest liquidus temperature of 1325°C was obtained by adding 5.7 mass% MgO to the 80mass%A‐20mass%B flux. (A: 12CaO‐7Al₂O₃, B: BaCeO₃+12mass%Al₂O₃). The distribution ratios of sulphur and sulphide capacities of the fluxes in this study were higher than those of the commercial product of calcium aluminate flux. This means that the CaO‐Al₂O₃‐BaO‐CeO₂‐MgO fluxes developed in this study have higher desulphurization and melting abilities compared with the commercial product of calcium aluminate flux.