Metal-insulator-semiconductor solar cell under gamma irradiation

The performance of a home made MIS–p-Si solar cell was experimentally studied under various gamma irradiation doses (up to 500 Mrad). The effect of radiation dose on the I−V and C−V characteristics was investigated in this work. The obtained results showed that all the output parameters of the cells under investigation were degraded with gamma radiation exposure. In addition, the effects of fabrication conditions (metal thickness and adding of antireflection coating) on the cell output parameters were also investigated.     

Control of Corrosion-Induced Damage in Reinforced Concrete Beams Using Carbon Fiber-Reinforced Polymer Laminates

This paper presents the results of an experimental study conducted to investigate the effect of carbon fiber-reinforced polymer (CFRP) confinement on the cracking damage induced by impressed current-accelerated corrosion of reinforced concrete beams. The beams were 254?mm deep by 152?mm wide by 3,200?mm long. Two different corrosion configurations, namely uniform and shear-span corrosion, were investigated in eight specimens at three different degrees of corrosion (5, 10, and 15% theoretical mass loss). Uniform corrosion along the whole length of the beams (3,000?mm) and shear-span corrosion (900?mm from each beam end) were considered. The different degrees of corrosion were induced using an accelerated corrosion technique with an impressed current. Based on the results, it was concluded that CFRP laminate confinement reduces corrosion expansion by up to 70% and slows the rate of corrosion through decreasing the corrosion mass loss by up to 35%.     

Polyaniline/akaganéite nanocomposite for detoxification of noxious Cr(VI) from aquatic environment

In this work, a removal of toxic hexavalent chromium Cr(VI) ion from aqueous solution was investigated and studied using nanocomposite of polyaniline (PANI) and akaganéite nanoparticles (NP). HCl doped PANI, and akaganéite NPs were prepared by chemical oxidative polymerization and co-precipitation techniques, respectively. The synthesized materials were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM), and high-resolution transmission electron microscope (HRTEM). It was indicated that the formed oxide NPs were consisted of akaganéite as dominant phase plus minor phases of hematite, magnetite, and/or maghemite. HRTEM images of the prepared nanocomposite demonstrated that the phases of oxide NPs embedded in the nanocomposite had the same crystallinity and morphology of pristine oxide NPs. It was found that size of nanocomposite particles has diameter ranged from 8.95 to 16.21 nm. Cr(VI) removals in a wide pH range from 2 to 9 were appropriated for prepared nanocomposite. The nanocomposite has demonstrated high removal percentage of 99.2 % and removal capacity of 17.36 mg/g for 7.0 mg/L Cr(VI) polluted aqueous solution at pH 2.0 for 5-min contact time. The synthesized nanocomposite was applied to remove Cr(VI) from a leather tanning wastewater sample with efficiency of 93.4 %.     

A study of A2/O process in El-Berka WWTP by replacing the anaerobic selector with UASB and adopting a hybrid system in the oxic zone

ABSTRACT

A multistage system comprising an upflow anaerobic sludge blanket (UASB) followed by anoxic unit and then oxic activated sludge (AS) with biofilm is studied in El-Berka WWTP, Egypt. Different organic loading wastewaters of chemical oxygen demand (COD) less than 500 mg/L till 3000 mg/L are tested during the study. The hydraulic retention time (HRT) varies for each loading from 7.5 to 10 to 15 h. The UASB reactor accomplishes the removal efficiency of 50%–70% of influent COD. The overall system performs the removal efficiency of 95% of influent COD and NH₄-N. Also, the results are verified by a modified mathematical model.     

Synthesis and structure study of copolymers from thiadiazole fused indolocarbazole and dithienosilole

We report synthesis and characterization of two D-A polymers (PSDT-C12 and PSDT-EH) with different side chains. Both polymers are based on alternate 12,13-dioctyl-indolo[2,3-a][1,2,5]thiadiazolo[3,4-c]carbazole (TDZIC) and dithienosilole derivative units in polymer main chain. We used TDZIC to enlarge the 2D conjugated plane of acceptor monomers by fusing benzothiadiazole (BT) unit with an indole unit having alkyl groups. PSDT-C12 exhibited 10 nm redshift compared to PSDT-EH in solid films, while their absorption spectra were almost identical in solutions. Since the backbone and side chains on the indolocarbazole group are the same, the redshift on PSDT-C12 could be resulted from the dodecyl (C12) side chain on the dithienosilole unit and different molecular weight between these two polymers. PSDT-C12 has a larger molecular weight than PSDT-EH. Therefore possibly both side chains and molecular weight contributed to the difference in the absorption spectra in solid films. The straight C-12 side chain has less steric hindrance than the branched EH side chain in solid films. PSDT-C12 has a longer main chain (larger molecule weight) than PSDT-EH, which can favour a more extended main chain interaction. The vibronic peak at 519 nm and shoulder at 563 nm in the PSDT-C12 film further confirmed stronger main chain interaction. Geometry optimization showed that head–tail (HT)-PSDT had a more twisting conjugated backbone with larger dihedral angle between dithienosilole unit and thiadiazole-fused ring compared to head–head/tail–tail (HH/TT)-PSDT.     

On the Performance of FFT/DWT/DCT-based OFDM Systems with Chaotic Interleaving and Channel Estimation Algorithms

The efficiency of data transmission over fading channels in orthogonal frequency division multiplexing (OFDM) systems depends on the employed interleaving method. In this study, we propose an improved chaotic interleaving scheme which aims to improve the performance of OFDM system under fading channel. In the proposed scheme, the binary data is interleaved with chaotic Baker map prior to the modulation process. In the sequel, significant degree of encryption is being added during data transmission. The performance of the proposed approach is tested on the conventional fast Fourier transform OFDM, discrete wavelet transform OFDM, and discrete cosine transform OFDM with and without chaotic interleaving. Furthermore, an expectation–maximization (EM) algorithm is proposed for improving channel impulse response (CIR) estimation based on a maximum likelihood principle. The proposed scheme makes use of EM algorithm to update the channel estimates until convergence is reached. The simulation results show the efficiency of the proposed algorithms under Rayleigh fading environments where the symbol error rate essentially coincides with that of the perfect channel case after the fifth EM iteration.     

Novel Tight Closed-Form Bounds for the Symbol Error Rate of EGC and MRC Diversity Receivers Employing Linear Modulations Over \alpha -\mu Fading

In this paper, we propose novel lower and upper bounds on the average symbol error rate (SER) of the dual-branch maximal-ratio combining and equal-gain combining diversity receivers assuming independent branches. \(M\) -ary pulse amplitude modulation and \(M\) -ary phase shift keying schemes are employed and operation over the \(\alpha -\mu \) fading channel is assumed. The proposed bounds are given in closed form and are very simple to calculate as they are composed of a double finite summation of basic functions that are readily available in the commercial software packages. Furthermore, the proposed bounds are valid for any combination of the parameters \(\alpha \) and \(\mu \) as well as \(M\) . Numerical results presented show that the proposed bounds are very tight when compared to the exact SER obtained via performing the exact integrations numerically making them an attractive much simpler alternative for SER evaluation studies.     

Preparation of Electrolytic Quasi-Solid-State Nanofibers for Dye-Sensitized Solar Cells

JOM - Nanofibers were prepared from a poly(acrylonitrile-co-vinyl acetate) [P(AN-co-VAC)]/polyvinylidene fluoride (PVDF) blend and used as a quasi-solid (QS) electrolyte for dye-sensitized solar...