Bovidae-based gelatin: Extractions method,physicochemical and functional properties,applications, and future trends

Gelatin is one of the most important multifunctional biopolymers and is widely used as an essential ingredient in food, pharmaceutical, and cosmetics. Porcine gelatin is regarded as the leading source of gelatin globally then followed by bovine gelatin. Porcine sources are favored over other sources since they are less expensive. However, porcine gelatin is religiously prohibited to be consumed by Muslims and the Jewish community. It is predicted that the global demand for gelatin will increase significantly in the future. Therefore, a sustainable source of gelatin with efficient production and free of disease transmission must be developed. The highest quality of Bovidae-based gelatin (BG) was acquired through alkaline pretreatment, which displayed excellent physicochemical and rheological properties. The utilization of mammalian- and plant-based enzyme significantly increased the gelatin yield. The emulsifying and foaming properties of BG also showed good stability when incorporated into food and pharmaceutical products. Manipulation of extraction conditions has enabled the development of custom-made gelatin with desired properties. This review highlighted the various modifications of extraction and processing methods to improve the physicochemical and functional properties of Bovidae-based gelatin. An in-depth analysis of the crucial stage of collagen breakdown is also discussed, which involved acid, alkaline, and enzyme pretreatment, respectively. In addition, the unique characteristics and primary qualities of BG including protein content, amphoteric property, gel strength, emulsifying and viscosity properties, and foaming ability were presented. Finally, the applications and prospects of BG as the preferred gelatin source globally were outlined.     

A Quest for (sila)0-4cyclopentasilylenes and their Arduengo Analogs by DFT

Silicon - Following our interest in exotic silylenes, here we compare and contrast 20 novel five-membered cyclic silylenes, including saturated (sila)0–4 cyclopentasilylenes (1–10) and...     

Trend Analysis and Spatial Prediction of Groundwater Levels Using Time Series Forecasting and a Novel Spatio-Temporal Method

Water Resources Management - Overexploitation of groundwater in the Malayer Plain has resulted in a continuous decline of groundwater levels over recent years with associated risks to water...     

Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Graft Copolymerization of Acrylamide onto Oil Palm Empty Fruit Bunch (OPEFB) Fiber

Grafting of acrylamide (AAm) onto oil palm empty fruits bunch fiber using hydrogen peroxide as initiator and methyl acrylate as comonomer was investigated. The amount of comonomer needed to make grafting of acrylamide possible was determined. The percentage of poly(acrylamide) and the comonomer in the final graft copolymer was estimated by elemental analysis. Results obtained indicated that methyl acrylate facilitated the incorporation of acrylamide monomer onto OPEFB. The reactivity ratios for both monomers were determined by using Fineman–Ross plot. The effects of reaction temperature and period as well as amount of the initiator, solvent, monomer and comonomer on the percentage of grafting at fixed amount of comonomer (11 mmol) were studied. Maximum percentage of grafting was achieved when the amount of initiator and solvent 3.98×10⁻³ mol and 50 mL respectively. The optimum reaction temperature was 50 ^○C and the reaction period was 90 min. Highest percentage of grafting was 232% when 25.6 mmol of acrylamide was used under these optimum conditions. The presence of functional group in the grafted polymer is characterized by infrared spectroscopy and the surface morphology is observed by scanning electron microscopy. Thermoanalytic investigation on OPEFB and OPEFB-g-PAAM were carried out to evaluate the thermal stability and respective activation energy of the materials.     

Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.     

Effect of kinesthetic and tactile haptic feedback on the quality of experience of edutainment applications

Haptic technologies and applications have received enormous attention in the last decade. The incorporation of haptic modality into multimedia applications adds excitement and enjoyment to an application. It also adds a more natural feel to multimedia applications, that otherwise would be limited to vision and audition, by engaging as well the user’s sense of touch, giving a more intrinsic feel essential for ambient intelligent applications. However, the improvement of an application’s Quality of Experience (QoE) by the addition of haptic feedback is still not completely understood. The research presented in this paper focuses on the effect of haptic feedback and what it potentially adds to the experience of the user as opposed to the traditional visual and auditory feedback. In essence, it investigates certain issues regarding stylus-based haptic education applications and haptic-enhanced entertainment videos. To this end, we used two haptic applications: the haptic handwriting learning tool to experiment with force feedback haptic interaction and the tactile YouTube application for tactile haptic feedback. In both applications, our analysis shows that the addition of haptic feedback will increase the QoE in the absence of fatigue or discomfort for this category of applications. This implies that the incorporation of haptic modality (both force feedback as well as tactile feedback) has positively contributed to the overall QoE for the users.     

A multi-objective strategy in genetic algorithms for gene selection of gene expression data

A microarray machine offers the capacity to measure the expression levels of thousands of genes simultaneously. It is used to collect information from tissue and cell samples regarding gene expression differences that could be useful for cancer classification. However, the urgent problems in the use of gene expression data are the availability of a huge number of genes relative to the small number of available samples, and the fact that many of the genes are not relevant to the classification. It has been shown that selecting a small subset of genes can lead to improved accuracy in the classification. Hence, this paper proposes a solution to the problems by using a multiobjective strategy in a genetic algorithm. This approach was tried on two benchmark gene expression data sets. It obtained encouraging results on those data sets as compared with an approach that used a single-objective strategy in a genetic algorithm. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Selecting informative genes from microarray data by using hybrid methods for cancer classification

Gene expression technology, namely microarrays, offers the ability to measure the expression levels of thousands of genes simultaneously in biological organisms. Microarray data are expected to be of significant help in the development of an efficient cancer diagnosis and classification platform. A major problem in these data is that the number of genes greatly exceeds the number of tissue samples. These data also have noisy genes. It has been shown in literature reviews that selecting a small subset of informative genes can lead to improved classification accuracy. Therefore, this paper aims to select a small subset of informative genes that are most relevant for cancer classification. To achieve this aim, an approach using two hybrid methods has been proposed. This approach is assessed and evaluated on two well-known microarray data sets, showing competitive results. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Technology application in project-based learning

Project-based learning is a student-centered comprehensive instructional approach where students collectively engage themselves in complex learning tasks. Recent advances in educational technologies have made student-centered learning in a technology rich environment both possible and feasible. This paper will report part of a larger study carried out at a school in the United States of America on the use ofconstructivism and technology in project-based learning. Data collection techniques included those typically associated with qualitative field research. In this paper, the technological infrastructure of the school and how technology is used in one of the project-based learning classes will be provided. Based on this study, some suggestions are also provided on how technology can be used in the context of other countries including in Malaysia.