Evaporation and Evolution of Suspended Solution Droplets at Atmospheric and Reduced Pressures

Thermal history and solute precipitation behavior of suspended solution droplets of sodium chloride (NaCl), magnesium sulphate (MgSO₄), and zirconium hydroxychloride (ZrO(OH)Cl) evaporating at atmospheric and reduced pressures are studied. Experimental measurements on the variation of droplet diameter, solution concentration, and temperature during the evaporation period are presented and discussed. The results of solute precipitation behavior in solution droplets observed under an optical microscope are displayed and discussed. Results indicate that reducing the pressure (∼ 33 kPa) results in a change in the solution droplet evaporation rate, but the thermal histories of a particular solution droplet are similar at the atmospheric and reduced pressures. At atmospheric and reduced pressures used in this study, the d² law for solution droplets is valid at early stages of the evaporation and before the solute precipitation initiates. Drying of MgSO₄ and ZrO(OH)Cl solution droplets results in the formation of spherical particles, whereas drying of spherical NaCl solution droplets results in the formation of cubic particles.     

Effect of Reactor Ambient Pressure on the Morphology of Spray Dried Magnesium Sulphate Powders

The effect of reducing the reactor air pressure on the morphology of spray dried magnesium sulphate powders is investigated, experimentally. A reactor, capable of drying and pyrolyzing solution sprays at low pressures, is designed and manufactured. A vibrating mesh nebulizer is employed to generate the spray. Four different pressures, starting from 60 Torr to the atmospheric pressure, and two different reactor air temperatures of 130°C and 420°C, are considered. In addition, two different concentrations of magnesium sulphate solutions are tested. The results are explained based on the effect of reactor air pressure on the droplet evaporation rate.     

Combined analytical and FEM methods for parameters calculation of detailed model for dry-type transformer

Non-flammable characteristic of cast-resin dry-type transformers make them suitable for different kind of usages. This paper presents a method of how to obtain high frequency model of these transformers. For this purpose a detailed model is used and parameters of the model including inductances, capacitances and resistances are calculated using FEM (finite elements method). The effect of the frequency is considered in the inductance calculation using FEM. In order to validate the model, a setup was constructed for testing on high-voltage winding of dry-type transformer. The simulation results were compared with the experimental data measured from FRA (frequency response analysis) and impulse tests.     

Impact of Flood Spreading on Groundwater Level Variation and Groundwater Quality in an Arid Environment

In arid and semiarid areas, bimodal and high rainfall leads to infrequent flood that can be extremely damaging. To reduce the impacts of persistent intra-seasonal drought and also to reduce flood damaging in arid and semiarid areas, rainwater storage is a prerequisite that keeps water far from evapotranspiration, increases groundwater level and decreases flood hazards modification to exchange between surface water and groundwater through flood spreading, dams, etc. The purpose of this paper is to delineate and explain variations in groundwater recharge and groundwater quality along an ephemeral stream that has been modified by flood spreading. Groundwater samples were collected from 14 deep wells located at different distances from flood spreading projection area (FSPA) in 1 month interval during September 2005 to September 2008. Groundwater quality was followed via Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl^-, Hco₃^- SO₄^2-, Electrical Conductivity (EC) and pH measurements for two time periods between 2005 and 2008. The results show significant impact of flood spreading in groundwater table and groundwater salinity variation. Groundwater table decreased in all study wells, but groundwater drawdown increased by increasing the distance to FSPA (during 4 years study, 11.02 m in the well located at 20 m of FSPA versus 38.88 in the well located at 1,825 m). Also ion concentration increased in all of the wells during the study period, but the increasing ion concentration was significantly less important in FSPA closeness.     

Investigation of well test behavior in gas condensate reservoir using single-phase pseudo-pressure function

Gas condensate reservoirs present complicated thermodynamic behavior when pressure falls below the dew point pressure, due to fluid dropout and change in the fluid composition. Condensate blockage in the near wellbore region reduces the well deliverability. Mixture composition change in the reservoir makes the interpretation of well tests in gas condensate reservoirs a serious challenge. In this study, at first the capillary number effect and Non-Darcy Flow on compositional simulation of gas condensate reservoirs were investigated and then well test analysis was carried out. The main objective of this work was to examine gas condensate well test analysis using single-phase gas pseudo-pressure and radial composite model assuming capillary number effect and Non-Darcy Flow. For this purpose some fluid samples were selected and results compared. Results indicate that estimation of reservoir properties below the dew point is in good agreement with actual input, particularly for lean fluid samples.     

Development of multiple-droplet drop-casting method for the fabrication of coatings and thin solid films

Spray coating is a commercial and low-cost technique for the fabrication of large-area coatings and thin films, but it is a stochastic process that is hard to control, as far as the fabrication of thin coatings and solid films is concerned. On the other hand, drop-casting is a facile and more controllable coating technique than spray coating, but its application is limited to small-area thin solid films and coatings. The objective of this work is, therefore, to study the feasibility of impinging an array of droplets, rather than just one droplet, to fabricate polymeric and other solution-processed thin films with larger surface areas than those produced by conventional drop-casting. To this end, in this study, four droplets of poly(3,4-ethylenedioxythiophene)–polystyrene sulfonate (PEDOT:PSS) solution are released simultaneously and impinged on the four vertices of a square on a wettable solid surface to make a thin film. The effect of the substrate texture on the spreading and the film formation process is studied. As a novel idea, the substrate is excited by ultrasonic vibration to improve the droplet spreading and coalescence. It is shown that as time elapses, the impinged droplets successfully coalesce and make a thin film. Surface morphology and roughness of the resulting PEDOT:PSS thin solid films show that, except on the edges, the resulting thin solid films are uniform. This leads us to conclude that the application of equal-sized and equally-spaced multiple droplets released simultaneously and impinged on vibrating substrates could be considered as a new coating technique, which has some of the benefits of the spray coating, but it is much more controllable than spray coating.     

A study on terraced apartments and their natural ventilation performance in hot and humid regions

Terraced apartments as a typology of the buildings are new approaches to meet energy conservation targets. This principle in the form of interactive spaces contributes to an incorporation of interior and exterior, daylight addition and exploitation of natural ventilation. This study mainly investigates the natural ventilation exploitation of a terraced apartment in the hot and humid region. One solid block and 4 porous apartments with different terrace depths (TD) are evaluated using computational fluid dynamics (CFD) analysis. The k-ε turbulence model was adapted to simulate airflow in and around a mid-rise building with 42 residential blocks. CFD analysis compares the effect of permeability in the form of terraces on wind behaviour and natural ventilation efficiency in a mid-rise building. Ventilation assessment parameters such as mean air velocity and mean age of air are measured to compare the natural ventilation performance. The simulation results clearly indicate that the implementation of permeability in the form of terraces can enhance building natural ventilation performance significantly. However, it is proved that some physical configurations such as terrace depth can influence this performance greatly. According to the results, increasing the terrace depth up to 1.2 meters will enhance the mean wind velocity 40%–88% inside the room, 10.61%–12.29% near the window and 63.44% on the openings. Velocity diagram follows a descending process after TD 1.2. The mean wind speed decreases to 25.53% inside the room, 15.09% inside terraces and 1.09% near the window. The average wind velocity on the openings is revealed to be 1.54 to 1.64 times larger in the porous models than the solid one. On the other hand, porous cases indicate lower values for the mean age of air compared to the solid model. This study provides proper guidelines to predict ventilation performance and to improve the design of naturally ventilated mid-rise buildings in hot and humid regions.     

Contribution of City Prosperity to Decisions on Healthy Building Design:A cases tudy of Tehran

In this paper,the city prosperity manifest is analyzed through a logical process and a framework is then proposed for designing healthy buildings in Tehran. The current status of urbanization in terms of the number of people living together and the changes in old behavior and perspectives have resulted in deficiencies to the health and hygiene of buildings apart from their surrounding environment. Consequently,these problems have affected people's well-being.This study mainly aims to determine policies and strategies for the architecturaldesign of healthy buildings according to health and safety conditions that influence the quality of internal spaces and external environment of cities.The study is conducted based on logical reasoning and uses focus group and in-depth interviews to assess the final result. The result is aframework that suggests a number of policies that can promote the mental and physical health as well as hygiene of residents through healthy buildings.     

Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al–20 Mg2Si–2Cu metal matrix composite using additives

Neural Computing and Applications - Today’s metal matrix composites are widely used due to their excellent properties, which are useful for high-performance applications in the automotive and...