Interfacial strength and chemistry of additive-free silicon nitride ceramics brazed with aluminium

Two kinds of additive-free silicon nitride ceramics were brazed with aluminium; one was with as-ground faying surfaces and the other was with faying surfaces heat-treated at 1073K for 1.8 ksec in air. The heat-treatment of the silicon nitride ceramics formed a silicon oxynitride layer on the faying surfaces and increased the brazing strength of the joints. A silica-alumina non-crystalline layer and a β′-sialon layer were formed successively from the aluminium side at the interface of the joints. The heat-treatment which made the former layer thicker is a necessary process in making reliable, strong brazed joints.     

Pulsed Electric Current Sintering of Silicon Nitride

Pulsed electric current sintering (PECS) has been used to densify α-Si₃N₄ powder doped with oxide additives of Y₂O₃ and Al₂O₃. A full density (>99%) was achieved with virtually no transformation to β-phase, resulting in a microstructure with fine equiaxed grains. With further holding at the sintering temperature, the α-to-β phase transformation took place, concurrent with an exaggerated grain growth of a limited number of elongated β-grains in a fine-grained matrix, leading to a distinct bimodal grain size distribution. The average grain size was found to obey a cubic growth law, indicating that the growth is diffusion-controlled. In contrast, the densification by hot pressing was accompanied by a significant degree of the phase transformation, and the subsequent grain growth gave a broad normal size distribution. The apparent activation energy for the phase transformation was as high as 1000 kJ/mol for PECS, almost twice the value for hot pressing (∼500 kJ/mol), thereby causing the retention of α-phase during the densification by PECS.     

Degradation by Sn diffusion applied to surface mounting with Ag-epoxy conductive adhesive with joining pressure

Shear and tensile tests were carried out on joints made with an isotropic conductive adhesive (ICA) consisting of Ag and epoxy: Sn–Pb plated components mounted on printed boards and tensile bars consisting of Sn plated Ni and Cu joined under various joining pressures. After 150 °C–100 h, shear strength degraded to 72% and Sn in the plating diffused slightly to the Ag fillers in the ICA for the component mounting. High joining pressure increased the initial tensile strength and volume percentage of Ag fillers in the ICA. After 150 °C–100 h, tensile strengths for all joining pressures degraded on average to 36% of the initial strengths. In the case of low joining pressures, an Ag–Sn intermetallic was formed at only the Ag–Sn contact points of the Sn/ICA interface; leading to reproducibility of the component mounting. The difference of degradation ratios between the mounted components and tensile bars could be explained by the offset of the Sn–Pb area at the component/ICA interface.     

A flexible videoconference system based on multiagent framework

We present a design and implementation of a flexible videoconference system (VCS) using multiagent computing technology. The proposed system, we named FVCS, aims to reduce the burden of the users under the operational environment with insufficient computational resources, such as the Internet environment with small-scale computers at homes and offices, by embedding flexibility to the conventional videoconference system. In this paper, we design and implement FVCS with knowledge-based multiagent framework to realize adaptability of FVCS. We also evaluate the adaptability of the prototype systems of FVCS based on an operational situation observed in its experiments. From the result of the experiments, we conclude that the multiagent-based design and implementation is reasonable for construction of FVCS.     

Partial redundancy elimination for access expressions by speculative code motion

We present a new memory access optimization for Java to perform aggressive code motion for speculatively optimizing memory accesses by applying partial redundancy elimination (PRE) techniques. First, to reduce as many barriers as possible and to enhance code motion, we perform alias analysis to identify all the regions in which each object reference is not aliased. Secondly, we find all the possible barriers. Finally, we perform code motions in three steps. For the first step, we apply a non‐speculative PRE algorithm to move load instructions and their following instructions in the backwards direction of the control flow graph. For the second step, we apply a speculative PRE algorithm to move some of them aggressively before the conditional branches. For the third step, we apply our modified version of a non‐speculative PRE algorithm to move store instructions in the forward direction of the control flow graph and to even move some of them after the merge points. We implemented our new algorithm in our production‐level Java just‐in‐time compiler. Our experimental results show that our speculative algorithm improves the average (maximum) performance by 13.1% (90.7%) for jBYTEmark and 1.4% (4.4%) for SPECjvm98 over the fastest algorithm previously described, while it increases the average (maximum) compilation time by 0.9% (2.9%) for both benchmark suites. Copyright © 2004 John Wiley & Sons, Ltd.     

An agent architecture for strategy-centric adaptive QoS control in flexible videoconference system

In this paper, we propose an agent architecture to improve flexibility of a videoconference system with strategy-centric adaptive QoS (Quality of Service) control mechanism. The proposed architecture realizes more flexibility by changing their QoS control strategies dynamically. To switch the strategies, system considers the properties of problems occurred on QoS and status of problem solving process. This architecture is introduced as a part of knowledge base of agent that deals with cooperation between software module of videoconference systems. We have implemented the mechanism, and our prototype system shows its capability of flexible problem solving against the QoS degradation, along with other possible problems within the given time limitation. Thus we confirmed that the proposed architecture can improve its flexibility of a videoconference system compared to traditional systems. Takuo Suganuma, Dr.Eng.: He is a research associate of Research Institute of Electrical Communication of Tohoku University. He received a Dr.Eng. degree from Chiba Institute of Technology in 1997. His research interests include agent-based computing and design methodology for distributed systems. He is a member of IPSJ, IEICE and IEEE. SungDoke Lee: He is a Ph.D. Student in the Graduate School of Information Sciences in Tohoku University. He received his MEng degree at Chonbuk National University, Korea in 1991. His research interests include Flexible Network and Knowledge of Agent. Tetsuo Kinoshita, Dr.Eng.: He is an associate professor of Research Institute of Electrical Communication of Tohoku University. He received a Dr.Eng. degree in information engineering from Tohoku University, Japan. His research interests include knowledge engineering, cooperative distributed processing and agent-based computing. He received the the IPSJ Best Paper Award in 1997, etc. He is a member of IPSJ, IEICE, JSAI, AAAI, ACM and IEEE. Norio Shiratori, Dr.Eng.: After receiving his Dr.Eng degree at Tohoku University, he joined the Research Institute of Electrical Communication of Tohoku University in 1977, and is now a professor at the same University. He has been engaged in research on distributed processing system, and flexible intelligent network. He received the 25th Anniversary of IPSJ Memorial Prize-Winning Paper Award in 1985, the 6th Telecommunications Advancement Foundation Incorporation Award in 1991, the Best Paper Award of ICOIN-9 in 1994, the IPSJ Best Paper Award in 1997, etc. He has been named a Fellow of the IEEE for his contributions to the field of computer communication networks.     

Evaluation of drug toxicity with hepatocytes cultured in a micro-space cell culture system

A micro-space cell culture system was recently developed in which cells such as hepatocytes can be cultured and formed into a multicellular three-dimensional (3D) architecture. In this study, we assessed the performance of HepG2 cells cultured in this micro-space cell culture system in a drug toxicity test, and evaluated the effects of micro-space culture on their hepatocyte-specific functions. The micro-space cell culture facilitated the formation of 3D HepG2 cell architecture. HepG2 cells cultured in a micro-space culture plate exhibited increased albumin secretion and enhanced mRNA expression levels of cytochrome P450 (CYP) enzyme compared to those cultured in a monolayer culture. When the cells were exposed to acetaminophen, a hepatotoxic drug, the damage to the HepG2 cells grown in micro-space culture was greater than the damage to the HepG2 cells grown in monolayer culture. In addition, human primary hepatocytes grown in micro-space culture also exhibited increased albumin secretion, enhanced CYP mRNA expression levels and increased sensitivity to acetaminophen compared to those grown in monolayer culture. These results suggest that this micro-space culture method enhances the hepatocyte-specific functions of hepatocytes, including drug-metabolizing enzyme activities, making hepatocytes grown in the micro-space culture system a useful tool for evaluating drug toxicity in vitro.     

Strain selection and scale-up fermentation for FR901379 acylase production by Streptomyces sp. no. 6907

Micafungin (FK463) is a widely used treatment for life-threatening, deep-seated fungal infections. It is an echinocandin-like lipopeptide derived from the chemical modification of deacylated FR901379, a type of lipopeptide antibiotic produced by Coleophoma empetri F-11899. The palmitoyl moiety of FR901379 is deacylated by FR901379 acylase produced by Streptomyces sp. no. 6907. In this study, our goal was to generate an improved strain of Streptomyces sp. no. 6907 capable of hyperproducing the FR901379-acylase enzyme. To accomplish this goal, modified strains of Streptomyces sp. no. 6907 were generated using UV-irradiation mutagenesis, and strain selection was performed using an agar-plate screening method to efficiently select an acylase-hyperproducing strain. Three marker indices were shown to correlate with elevated acylase production: decreased candidacidal activity of FR901379, decreased proteolytic activity on skim milk, and phenotypic characteristics. Cloning and subsequent sequencing of the acylase gene from the hyperproducing mutant revealed no mutations in either the acylase structural gene or the 5'-flanking region required for gene expression. The growth medium was also modified to maximize acylase production. We successfully increased acylase activity approximately 65-fold, compared with the original growth conditions (wild strain cultured in the original unmodified medium). To minimize formation of excess foam during the fermentation process, we optimized the parameters of agitation speed, as calculated from the discharge flow rate. Using our improved strain and the optimized medium and growth conditions, we have developed an improved and highly reproducible method for stable large-scale production of FR901379-acylase.     

Densification and Thermal Conductivity of AIN Doped with Y2O3, CaO, and Li2O

Small amounts of Li₂O result in sintering in the AIN-Y₂O₃-CaO and AIN-CaO systems at firing temperatures <1600°C. The effect is ascribed to reduction of the liquidus temperature. Furthermore, Li₂O is removed by volatization at temperatures from 1300° to 1600°C, and its content decreases several ppm from the initial 0.3 wt%. Li₂O-doped AIN specimens containing Y₂O₃ and CaO additives are well densified by firing at 1600°C for 6 h, and their thermal conductivity is 135 W^.m^−1.K⁻¹.The effect of Li₂O addition on sintering and thermal conductivity also is discussed through thermo-dynamic considerations.