Microarrays of near-field optical probes with adjustable dimensions

We present the fabrication and the characterization of high-density microarrays comprising thousands of near-field optical probes. Two types of microarrays have been prepared by adapting the SNOM methodology: arrays of uncoated fiber nanotips (i.e. apertureless probes) and arrays of apertures with adjustable subwavelength dimensions. Such arrays were fabricated by retaining the coherent structure of monomode optical fiber bundles and therefore keeping their imaging properties. The size of the apertures in a microarray was tuned at the nanometer scale by modifying the fabrication parameters. Far-field characterization of these near-field probe arrays shows completely different behavior depending both on their architecture and on their characteristic size. The angular distribution of the far-field intensity transmitted through the aperture arrays is used to determine the optical size of such diffracting apertures. Aperture radii ranging from 95 to 250 nm were found in good agreement with SEM data. Furthermore, each nanoaperture of the array is optically independent in the far-field regime. Eventually, this study demonstrates potential applications of these imaging arrays as parallel near-field optical probes in both configurations (apertureless and with apertures).     

Impact of variable frequency microwave and rapid thermal sintering on microstructure of inkjet-printed silver nanoparticles

The effect of thermal profile on microstructure is studied in the frame of thin films deposited by inkjet-printing technology. The role of sintering temperature and thermal ramp is particularly investigated. Fast heating ramps exhibit coarse grains and pores, especially when a hybrid microwave curing is performed. This enhanced growth is attributed to the quick activation of densifying sintering regimes without undergoing thermal energy loss at low temperature. Microstructural evolution of various sintered inkjet-printed films is correlated with electrical resistivity and with the Young’s modulus determined by nanoindentation. A strong link between those three parameters is highlighted during experiments giving credit to either a surface or a fully volumetric sintering, according to the process. Sintering is then mainly triggered by surface mass transfer or by grain boundary diffusion. Silver thin films with an electrical resistivity 4–5 times higher than the bulk, has been reached in a few minutes with a Young’s modulus of 38?GPa.     

Effects of Bismuth Doping on the Physical Properties of La0.6−x Bi x Sr0.4CoO3 (0≤x≤0.15) Cobaltites

The structural and magnetic properties of cobaltites with the nominal composition La_0.6?x Bi _x Sr_0.4CoO₃ (0≤x≤0.15) have been investigated. X-ray diffraction analysis using Rietveld refinement show that all our samples crystallize in the rhombohedral structure. The zero field cooled (ZFC) and field cooled (FC) magnetization curves at 50 mT exhibits thermomagnetic irreversibility signature of short range ferromagnetic interactions in our samples. The ferromagnetic–paramagnetic transition temperature decreases with increasing Bi amount. In the paramagnetic phase, all our synthesized samples obey to the Curie–Weiss law. The Curie–Weiss analysis suggests that the spin state of Co³⁺ is IS while Co⁴⁺ ions are in IS for x=0 and LS for x≥0.05. The Bi doping also leads to a weakening in the magnetic moment. The magnetic entropy change exhibits a maximum value which decreases from 2.28 J/kg?K for x=0 to 1.24 J/kg?K for x=0.15 upon a magnetic field change of 5 T.     

Double‐Emulsion Globules as a Tool to Produce 2D Patterned Metal Deposits Using Electro‐Colloidal Lithography

A technique developed to self assemble solid colloidal particles under a sinusoidal electric field (AC field) is adapted to soft W/O/W double‐emulsion globules, and is exploited for surface patterning. Double‐emulsions containing cupric ions are prepared, placed between two planar ITO electrodes and submitted to a transversal AC field which induced their ordering into hexagonal 2D‐arrays. The characteristic spacing is monitored by varying the globule volume fraction. Such self‐assembly is used to fabricate copper‐depleted arrays, using globules as both a metal precursor reservoir/provider and as a mask. The ordered globule monolayer is then submitted to a DC field to induce metal precursor leakage and its reduction onto the electrode. The organized, oily and dielectric globules generate arrays of holes (c.a. 7 μm) into a thin copper deposit (thickness of 12 nm). Holes are shown to be formed below the globules, and their separation (from 10 to 30 μm) can be tuned as deduced from direct observations using optical and atomic force microscopy.     

The effects of gate length variation and trapping effects on the transient response of AlGaN/GaN HEMT’s on SiC substrates

In AlGaN/GaN heterostructure field-effect transistors, the surface defects and dislocations may serve as trapping centers and affect the device performance via leakage current. In this paper we report results of our investigation of the trapping characteristics of Al_0.25Ga_0.75N/GaN HEMT using the Conductance Deep Level Transient Spectroscopy (CDLTS). Two deep level electronic defects were observed labeled E₁ and HL₁, with activation energies E_a1 = 1.36 eV and E_a2 = 0.63 eV. The hole-trap HL₁ is characterized for the first time in our studies. We identified the characteristics of the traps at the AlGaN/GaN interface adjoining the channel and the surface along the ungated region between the gate and the drain, as well as the effects of the surface traps.     

Local convex directions for Hurwitz stable polynomials

A condition for a polynomial p(s) to be a local convex direction for a Hurwitz stable polynomial q(s) is derived. The condition is in terms of polynomials associated with the even and odd parts of p(s) and q ( s), and constitutes a generalization of Rantzer's phase-growth condition for global convex directions. It is used to determine convex directions for certain subsets of Hurwitz stable polynomials     

A new method for the computation of all stabilizing controllers of a given order

A new method is given for computing the set of all stabilizing controllers of a given order for linear, time invariant, scalar plants. The method is based on a generalized Hermite–Biehler theorem and the successive application of a modified constant gain stabilizing algorithm to subsidiary plants. It is applicable to both continuous and discrete time systems.     

Effects of static magnetic fields on growth and membrane lipid composition of Salmonella typhimurium wild-type and dam mutant strains

This study was carried out to explore the adaptive mechanisms of S. typhimurium particularly, the implication of the Dam methyltransferase in the remodelling of membrane lipid composition to overcome magnetic field stress. With this aim, we focused our analyses on the increase in viable numbers and membrane lipid modifications of S. typhimurium wild-type and dam mutant cells exposed for 10h to static magnetic fields (SMF; 200 mT). For the wild-type strain, exposure to SMF induced a significant decrease (p<0.05) of CFU at 6h, followed by an increase between 8 and 10h. Growth of the dam mutant was significantly affected (p<0.05) after 6h and no recovery was observed until 10h, highlighting a different behavior of SMF stressed wild-type and dam mutant strains. SMF significantly affected the phospholipid proportions in the two strains. The most affected were those of the acidic phospholipids, cardiolipins (CL). In the dam strain the phospholipid response to SMF followed a globally similar trend as in the wild-type with however lower effects, leading mainly to an unusual accumulation of CL. This would in part explain the different behavior of the wild-type and the dam strain. Results showed a significant increase of membrane cyclic fatty acids Cyc17 and Cyc19 in the wild-type strain but only the Cyc17 in the dam strain and a meaningful increase of the total unsaturated fatty acids (UFAs) to total saturated fatty acids (SFAs) ratios of the exposed cells compared to controls from 3 to 9h (p<0.05) for both strains. The net increase of the total UFAs to total SFAs ratios seemed to result mainly from the increase of (C18:1) proportion (p<0.05) and to a lower extent from that of (C16:1) (p<0.05). These modifications of cyclic and unsaturated fatty acid proportions constitute an adaptive response to SMF stress in S. typhimurium wild-type and dam mutants to maintain an optimum level of membrane fluidity under SMF.     

New biosourced AA and AB monomers from 1,4:3,6-dianhydrohexitols,Isosorbide, Isomannide,and Isoidide

In the present work, we propose the synthesis of a new family of sugar derived 1,4:3,6-dianhydrohexitol based AA/AB-type monomers. Unprecedented diacids based on Isomannide and Isoidide were elaborated with high yields and showed interestingly high melting point ranges (240–375 °C). Optimization of reaction conditions (temperature, time of reaction, and reactant ratios) has been investigated to synthesize the key intermediate of a set of AB monomers with acid, ester, and acid chloride functionalities. Isosorbide based ether benzoic acid AB monomer was polymerized and characterized by NMR and DSC techniques. The results show a semicrystalline behavior of the obtained polymer thanks to the controlled stereoregular arrangement of the AB starting monomer.