Accurate surface potential determination in Schottky diodes by use of correlated current and capacitance voltage measurements. Application to n–InP

Based on current voltage (I-V_g) and capacitance voltage (C-V_g) measurements, a reliable procedure is proposed to determine the effective surface potential V_d.V_g/ in Schottky diodes. In the framework of thermionic emission, our analysis includes both the effect of the series resistance and the ideality factor, even voltage dependent. This technique is applied to n-type indium phosphide (n-InP) Schottky diodes with and without an interfacial layer and allows us to provide an interpretation of the observed peak on the C-V_g measurements. The study clearly shows that the depletion width and the flat band barrier height deduced from C-V_g, which are important parameters directly related to the surface potential in the semiconductor, should be estimated within our approach to obtain more reliable information.     

Dual-energy X-ray absorptiometry derived structural geometry for stress fracture prediction in male U.S. Marine Corps recruits

OBJECTIVES: To evaluate the effects of losartan administration on cardiovascular mass, systemic and coronary hemodynamics (rest, maximal treadmill exercise, and dipyridamole infusion) and on resting regional hemodynamics in conscious spontaneously hypertensive rats (SHR) and Wistar-Kyoto (WKY) rats. RESULTS: Although losartan administration (two doses: 10 and 30 mg/kg per day for 3 weeks by gavage) reduced left ventricular mass at the higher dose in WKY rats and with both doses in SHR, only the higher dose reduced arterial pressure in SHR. Losartan administration did not affect cardiac index, myocardial or other organ flows (radiomicrosphere) at rest in both strains. Significant increases in cardiac index and coronary flow and decreases in coronary vascular resistance were observed during exercise in both strains and these responses were not affected by losartan administration. Compared with those in WKY rats, coronary flow and flow reserve (dipyridamole) were decreased and minimal coronary vascular resistance was increased in untreated SHR. Administration of a higher losartan dose increased coronary flow reserve and decreased minimal coronary vascular resistance (measured during dipyridamole infusion) in SHR. CONCLUSIONS: These data demonstrated that losartan administration reduced left ventricular mass, a response that did not seem to be solely dependent on afterload. Furthermore, cardiac and stroke indices and coronary flow reserve were not changed in SHR during maximal treadmill exercise after hypertrophy reversal, even with the lower dose of losartan and when the ventricular afterload was similar to that of untreated SHR.     

Short-Term Annealing in Electron-Irradiated p-Type Silicon

Studies of short-term annealing of minority carrier lifetime in bulk p-type silicon following ~1.4 MeV pulsed electron irradiation are reported. Investigations were performed on vacuum-float-zone boron-doped material in the temperature range 235-3860K and the maximum fluence employed was ~5 x 1012 electrons/cm . Simple exponential recovery under isothermal conditions, a characteristic of first order reaction kinetics, was observed. The amount of unstable damage varied as exp (-t/?R), where ?R is the characteristic recovery time. The temperature dependence of ?R yielded an activation energy of 0. 32 ± 0. 03 eV for the recovery process. The current results, when extrapolated to lower temperatures, compare quite closely with Watkins' EPR data for similar material. It is concluded that the present data is consistent with the observation of neutral vacancy annealing.     

106Ru/106Rh plaque and proton radiotherapy for ocular melanoma: a comparative dosimetric study

The objective of this study was to perform comparative dosimetric studies of both 106Ru/106Rh plaque brachytherapy and external beam proton therapy proposed for ocular treatments at the University of Texas M. D. Anderson Cancer Center, Houston, TX, USA. These modalities were also compared with traditional 125I plaque brachytherapy. Using a standardised eye model with a representative ocular melanoma tumour, the relative dose distributions within the tumour and surrounding tissue were calculated using the Monte Carlo code MCNPX. Published absorbed dose distributions benchmarked the Monte Carlo models. Results indicate that the proton beam provided superior dose uniformity within the tumour volume, whereas the dose distribution from 106Ru/106Rh was more heterogeneous. Relative to 125I COMS plaque, both 106Ru/106Rh and protons have shown more confined dose distributions to the tumour volume in this situation, thus sparing other critical ocular structures. For protons, it has been shown that only doses lower than the maximum dose are delivered outside the tumour volume. Depending on the clinical situation, this may aid in the sparing of critical structures located in the sclera and optic disc boundary. The Monte Carlo model's statistical uncertainties of the mean dose estimates for the 106Ru/106Rh plaque and proton beam were 3 and 2.5%, respectively.     

High-dose chemotherapy followed by reinfusion of selected CD34+ peripheral blood cells in patients with poor-prognosis breast cancer: a randomized multicentre study

Seven chlorine-containing orcinol derivatives (2-8) and orcinol (9) have been isolated from diseased bulbs of the edible lily Lilium maximowiczii, and their structures have been elucidated. Six of the chlorinated orcinol derivatives (2, 4-8) showed antifungal activity. Because organochlorine compounds are rare in terrestrial higher plants, their biosynthetic origin was examined. These compounds were shown to be induced in intact bulb scales by UV irradiation or by inoculation with the pathogenic fungus Fusarium oxysporum f. sp. lilii. Biosynthetic studies suggested that these "natural organochlorine pesticides" are produced by enzymatic chlorination of orcinol (9) with chloroperoxidase and hydrogen peroxide, which are both induced in the plant tissue under stress conditions.     

Microscopic image segmentation based on pixel classification and dimensionality reduction

Pathological image analysis plays a significant role in effective disease diagnostics. In this article, a tool for diagnosis assistance by automatic segmentation of bone marrow images is introduced. The aim of our segmentation is to demarcate cell's component: nucleus, cytoplasm, red cells, and background. Different color spaces were used to extract color's features to profit of their complementarity. We introduce several dimensionality reduction techniques. These techniques are exemplified on a support vector machine pixel‐based bone marrow image segmentation problem in which it is shown that it may give significant improvement in segmentation accuracy and time consuming. © 2013 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 23, 22–28, 2013     

Optimal operating strategies for emulsion terpolymerisation

Optimal control policies for emulsion terpolymerisation of styrene, methyl methacrylate (MMA) and methyl acrylate (MA) were determined in a semi-batch reactor using the multi-objective dynamic optimisation method. A comprehensive dynamic model was used for the design of optimal control. The control vector parameterisation (CVP) approach was implemented for constrained optimisation for emulsion terpolymerisation reactors. The feed rates of styrene, MMA, MA, surfactant and initiator, and the temperature of the reactor were used as manipulating variables to produce terpolymers of desired composition, molecular weight distribution (MWD) and particle size distribution (PSD). The particle size polydispersity index (PSPI), molecular weight polydispersity index (MWPI) and the overall terpolymer composition ratios were incorporated in the objective functions to optimise the PSD, MWD and terpolymer composition, respectively. The optimised operational policies were validated with experiments via one stirred tank polymerisation reactor.     

Effect of alcohols on the retention mechanisms of Cd and Zn on Wyoming bentonite and illite

The effects of ethanol- and methanol-water mixtures on Zn and Cd sorption onto bentonite and illite were investigated at low initial metal concentration (< or =10(-5) M) and low ionic strength (2.5 mM Ca(NO3)2). For all cosolvent fractions, the percent coverage of Zn and Cd to clay minerals was low (<5%) and independent of the solution dielectric constant, epsilon, except for Zn at 10 microM. Cadmium sorption to bentonite and illite was independent of epsilon. Zinc sorption varied significantly between clay types, cosolvent type, and cosolvent fraction. The partitioning of Zn to bentonite increased from 0 to 10% alcohol-water fraction and decreased after 10%. The same pattern was observed for the partitioning of Zn on illite in methanol-water mixtures. In ethanol-water mixtures, Kf for Zn on illite increased continuouslyfrom 0 to 50% ethanol. The decreased partitioning and hence mobility of Zn to bentonite and illite after 10% alcohol (only in methanol-water mixtures for illite) suggests a potential environmental threat resulting from increased transport of this metal in subsurface environments where these cosolvents are present.