Trans FA and solid fat contents of margarines marketed in Turkey

Trans FA (TFA), solid fat contents (SFC), and slip melting points of 12 different tub and stick margarines marketed in Turkey were examined in this study. No trans isomers were found in four margarines, which suggests they were formulated from interesterified or blended fats and oils. The products with no TFA generally had more short-chain saturated FA, which suggests coconut oil-based oil components. TFA content of the other 10 products varied from 7.7 to 37.8%. Compared to the products formulated in North America, Turkish margarines contain more TFA and have higher SFC.     

An experimental study for the effect of different clearances on burr, smooth-sheared and blanking force on aluminium sheet metal

In this study, an experimental study was carried out to examine the effect of different clearances on smooth-sheared depth, burr height and blanking force. Aluminium sheet metals with 0.8, 1, and 1.5 mm thicknesses were used in the experiments. These experiments were carried out in circular blanking dies to 6, 8, 10, and 12 mm diameters. Six different clearances (0.009, 0.064, 0.12, 0.175, 0.231 and 0.287 mm) were used for every material and diameter. The results of the experiment show that burr, smooth-sheared and punch force is strongly related to the clearance value. The results are in agreement with the results of previous theoretical and experimental work in the literature.     

Multi-period international facilities location: An algorithm and application

In today's markets, customers want to buy the best quality products at the lowest prices, regardless of where they are produced. Hence, most companies can no longer afford to operate in a single domestic market. To penetrate global markets and obtain their benefits, companies are under tremendous pressure to be competitive and to reduce their production costs. Establishing foreign manufacturing facilities has therefore been taking place rapidly and is further enhanced by trade agreements such as NAFTA. Even though there has been much written on facilities location, in general the literature on international facilities location is rather limited. This paper surveys the available literature and provides an efficient branch and bound procedure for solving the uncapacitated multi-period international facilities location problem. This branch and bound procedure is applied to a case study and tested for its efficiency. The solutions and computation times are compared with those obtained using LINDO. This extensive computational analysis has been extremely promising.     

Investigations on the variation of corrosion and contact resistance characteristics of metallic bipolar plates manufactured under long-run conditions

Tribological variations, surface conditions (roughness, hardness, coating) and surface interactions between micro-stamping dies and bipolar plate blanks play a critical role in determining the surface quality, channel formation and precision of bipolar plates. This study is aimed to understand the cause, mechanism and consequences of interactions between micro-stamping process conditions and bipolar plate quality. A total of 2000 repeated micro-stamping of 51 μm-thick uncoated and 1 μm-thick ZrN coated SS316L sheet blanks into an array of 750 μm micro-channels were performed using 175-220 kN force levels with constant stamping speed of 1 mm/s. Microscopic examinations were conducted periodically on both die and coated & uncoated plate surfaces to observe topographic variations. In addition, corrosion and contact resistance tests were carried out in the same intervals. Analysis of variance (ANOVA) technique was used to determine the significance of the process parameters on channel height, roughness, corrosion and contact resistance differences. The results revealed similar roughness trends for die and plate surfaces during 2000 micro-stampings. ZrN coating with 1 μm thickness dramatically improved corrosion and contact resistance behavior of plates.     

Investigation of Some Properties of Chemical Fertilizers Using Gamma-ray Spectrometry and Energy Dispersive X-ray Fluorescence Spectrometry

Instruments and Experimental Techniques - The purpose of this study is to investigate chemical fertilizers using gamma-ray spectrometry and energy dispersive X-ray fluorescence spectrometry...     

Comparative Cytotoxicity of Artemisinin and Cisplatin and Their Interactions with Chlorogenic Acids in MCF7 Breast Cancer Cells

In parts of Africa and Asia, self‐medication with a hot water infusion of Artemisia annua (Artemisia tea) is a common practice for a number of ailments including malaria and cancer. In our earlier work, such an extract showed better potency than artemisinin alone against both chloroquine‐sensitive and ‐resistant parasites. In this study, in vitro tests of the infusion in MCF7 cells showed high IC₅₀ values (>200 μM ). The combination of artemisinin and 3‐caffeoylquinic acid (3CA), two major components in the extract, was strongly antagonistic and gave a near total loss of cytotoxicity for artemisinin. We observed that the interaction of 3CAs with another cytotoxic compound, cisplatin, showed potentiation of activity by 2.5‐fold. The chelation of cellular iron by 3CA is hypothesized as a possible explanation for the loss of artemisinin activity.     

Catalytic behavior of ruthenium in soybean oil hydrogenation

Soybean oil was hydrogenated with a carbon‐supported ruthenium catalyst (Ru/C) at 165 °C, 2 bar H₂ and 500 rpm stirring speed. Reaction rates, trans isomer formation, selectivity ratios and melting behaviors of the samples were monitored. No catalytic activity was found for the application of 10 ppm of the catalyst, and significant catalytic activity appeared at >50 ppm of active catalyst. The catalyst concentration had an effect on the reaction rate of hydrogenation, but the weight‐normalized reaction rate constant (k_c) was almost independent of the catalyst concentration at lower iodine values. Ru/C generated considerable amounts of trans fatty acids (TFA), including high amounts of trans 18:2, and also stearic acid, due to its very non‐selective nature. The selectivity ratios were found to be low and varied between 1.12 and 4.32 during the reactions. On the other hand, because of the low selectivity, higher slip melting points and solid fat contents at high temperatures were obtained than those for nickel and palladium catalysts. Another different characteristic of this catalyst was the formation (max 1.67%) of conjugated linoleic acid (CLA) during hydrogenation. Besides, CLA formation in the early stages of the reactions did not change very much with the lower iodine values.     

Application of two dimensional (2D) FEA for the tube hydroforming process

Use of FEM in the metal forming process has been a proven analysis tool. Two-dimensional FEA for simplified sections can help to reduce time and cost in part, tooling and process design in tube hydroforming technology as it is a relatively new process, and the existing experience and knowledge base is not as broad as with other forming processes. Some case studies are presented to demonstrate the use of two-dimensional FEA in the hydroforming process. Upon verification through comparison of FEA predictions with experimental results, further planned simulations are conducted to generate simple design rules on geometrical and process parameters.