DESIGN AND IMPLEMENTATION OF STATE OBSERVERS IN REACTIVE DISTILLATION

This study demonstrates that state observers can be developed and applied to infer the composition profiles of reactive distillation columns from noise-contaminated temperature measurements. The design and implementation of a Kalman filter (KF) and a Luenberger observer (LO) are carried out, and their performances are quantitatively assessed. The reliability, accuracy, and robustness of the two designs method are examined and compared quantitatively. The design and implementation of a Luenberger observer are simpler and easier to carry out than those of a Kalman filter. On the other hand, a Kalman filter is found to be more robust to a noisy measurements, erroneous initial estimates, and model uncertainties. A Luenberger observer could be used for composition estimation of reactive distillation when an ideal model of the system can reasonably approximate the real system; otherwise, a Kalman filter is recommended to be applied in more practical situations.     

Chemical composition and nutritional quality of tehineh (sesame butter)

The chemical composition and nutritional quality of tehineh, a paste of dehulled roasted sesame seeds, from Saudi Arabia and other countries, were studied. Results showed 24.7% protein, 58.9% fat, 2.3% fiber, 3.0% ash and <1.0% moisture. The tehineh contained relatively high amounts (mg/100 g) of P (692), Mg (362), Fe (7.19), Cu (1.96), Mn (1.46) and Zn (7.82) and low amounts of Ca (61) and Se (0.05). Gas-liquid chromatography (GLC) analysis of the oil revealed percentages of 42.4 for oleic, 39.7 for linoleic, 9.8 for palmitic and 6.4 for stearic acid. Lysine was the only limiting amino acid with a chemical score of 64, while the sulphur-containing amino acids (methionine + cystine) and tryptophan were present in amounts exceeding the requirement of the FAO/WHO (1973) reference protein. The in vitro protein digestibility (IVPD) value of 83.3% and the calculated protein efficiency ratio (C-PER), 2.14, were slightly higher than those of sesame seeds and both values were lower than the IVPD and C-PER of 90.0% and 2.50, respectively, for ANRC casein.     

Kinetics of oxygen absorption in aqueous sodium dithionite solutions

The absorption and reaction of oxygen in aqueous alkaline solutions of sodium dithionite has been experimentally investigated in a novel gas-liquid contactor. The novel gas-lift bubble column contactor was used to study the kinetics over wide ranges of reactant concentrations, temperature, and pH. The oxygen-sodium dithionite reaction was found to be first-order with respect to dithionite in the range of dithionite concentration < 0.1 M, and second-order in the range of dithionite concentration > 0.1 M. The reaction with respect to oxygen was found to be zero-order for all dithionite concentrations. These results and experimental investigations of the effect of solution alkalinity and temperature on the reaction rate are consistent with previous findings obtained in different gas-liquid contactors. The results thus confirm the feasibility of using the gas-lift bubble column for the kinetics of gas-liquid reactions.     

Hyperspectral imaging-based unsupervised adulterated red chili content transformation for classification: Identification of red chili adulterants

Neural Computing and Applications - Preserving red-chili quality is of utmost importance in which the authorities demand quality techniques to detect, classify, and prevent it from impurities. For...     

Multimedia framework to support eHealth applications

Limited bandwidth resources lead to a number of challenges especially for eHealth applications, which are communicated over IP and wireless networks. These multimedia services include high-resolution videos and have very large file sizes that require a high level of compression to overcome this limitation. Therefore, there is an acute demand for the research community to provide an efficient multimedia framework to encode medical videos with high quality specifically under the conditions of an error-prone environment. Both an affordable delivery framework and effective coding techniques are extremely desirable for the delivery of high-quality eHealth video applications for transmission over heterogeneous networks and devices. In this paper, we propose and demonstrate a multimedia framework to support eHealth applications, which has an improved coding scheme that uses an SVC-scalable extension of MPEC-4 AVC/H.264. Simulation results show that the proposed scheme achieves a significant improvement in terms of the PSNR-Y gain and reduces the picture quality degradation caused by artifacts and distortions, compared to the existing scheme.     

DeepClassRooms: a deep learning based digital twin framework for on-campus class rooms

Neural Computing and Applications - A lot of different methods are being opted for improving the educational standards through monitoring of the classrooms. The developed world uses Smart...     

Amended hybrid multi-verse optimizer with genetic algorithm for solving task scheduling problem in cloud computing

The Journal of Supercomputing - The central cloud facilities based on virtual machines offer many benefits to reduce the scheduling costs and improve service availability and accessibility. The...     

Assessing tropical cyclone impacts using object-based moderate spatial resolution image analysis: a case study in Bangladesh

The environmental and societal impacts of tropical cyclones could be reduced using a range of management initiatives. Remote sensing can be a cost effective, accurate, and potential tool for mapping the multiple impacts caused by tropical cyclones using high-to-moderate spatial resolution (5–30 m) satellite imagery to provide data on the following essential parameters – evacuation, relief, and management of natural resources. This study developed and evaluated an approach for assessing the impacts of tropical cyclones through object-based image analysis and moderate spatial resolution imagery. Pre- and post-cyclone maps of artificial and natural features are required for assessing the overall impacts in the landscape that could be acquired by mapping specific land cover types. We used the object-based approach to map land-cover types in pre- and post-cyclone Satellite Pour l’Observation de la Terre (SPOT) 5 image data and the post-classification comparison technique to identify changes in the particular features in the landscape. Cyclone Sidr (2007) was used to test the applicability of this approach in Sarankhola Upazila in Bangladesh. The object-based approach provided accurate results for classifying features from pre- and post-cyclone satellite images with an overall accuracy of 95.43% and 93.27%, respectively. Mapped changes identified the extent, type, and form of cyclone induced impacts. Our results indicate that 63.15% of the study area was significantly affected by cyclone Sidr. The majority of mapped damage was found in vegetation, cropped lands, settlements, and infrastructure. The damage results were verified through the high spatial resolution satellite imagery, reports and pictures that were taken after the cyclone. The methods developed may be used in future to assess the multiple impacts caused by tropical cyclones in Bangladesh and other similar environments for the purposes of tropical cyclone disaster management.     

3D block-based medial axis transform and chessboard distance transform based on dominance

Traditionally, the block-based medial axis transform (BB-MAT) and the chessboard distance transform (CDT) were usually viewed as two completely different image computation problems, especially for three dimensional (3D) space. In fact, there exist some equivalent properties between them. The relationship between both of them is first derived and proved in this paper. One of the significant properties is that CDT for 3D binary image V is equal to BB-MAT for image V' where it denotes the inverse image of V. In a parallel algorithm, a cost is defined as the product of the time complexity and the number of processors used. The main contribution of this work is to reduce the costs of 3D BB-MAT and 3D CDT problems proposed by Wang [65]. Based on the reverse-dominance technique which is redefined from dominance concept, we achieve the computation of the 3D CDT problem by implementing the 3D BB-MAT algorithm first. For a 3D binary image of size N³, our parallel algorithm can be run in O(logN) time using N³ processors on the concurrent read exclusive write (CREW) parallel random access machine (PRAM) model to solve both 3D BB-MAT and 3D CDT problems, respectively. The presented results for the cost are reduced in comparison with those of Wang's. To the best of our knowledge, this work is the lowest costs for the 3D BB-MAT and 3D CDT algorithms known. In parallel algorithms, the running time can be divided into computation time and communication time. The experimental results of the running, communication and computation times for the different problem sizes are implemented in an HP Superdome with SMP/CC-NUMA (symmetric multiprocessor/cache coherent non-uniform memory access) architecture. We conclude that the parallel computer (i.e., SMP/CC-NUMA architecture or cluster system) is more suitable for solving problems with a large amount of input size.