Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

下一代无线网络架构

无线局域网(WLAN)技术为家庭和企业用户描绘了美好的蓝图,也吸引着众多半导体和系统设备厂商涌入这一市场。WLAN技术的不断演变,将标准制订团体、互操作性论坛(互操作性是市场进一步接受的关键要求)、产品OEM厂商和相应的半导体厂商紧密联系在一起。     

Chromatograpahic Analysis of Eriobotrya japonica Fat

Thin layer chromatography and infrared spectophotometry of the fat of Eriobotrya japonica shows the presence of hydrocarbons (3.1%), was esters (5.3%), triglycerides (786%) and the last polar fraction containing fatty acids, colouring matter etc. (13.0%). After the saponification of the fat, the fatty acids C₁₂-C₂₄ and fatty alcohols C₁₂-C₂₆ determined first time as methyl esters and acetates respectively were identified by the application of gas liquid chromatography.     

Deep learning approaches for speech emotion recognition: state of the art and research challenges

Speech emotion recognition (SER) systems identify emotions from the human voice in the areas of smart healthcare, driving a vehicle, call centers, automatic translation systems, and human-machine interaction. In the classical SER process, discriminative acoustic feature extraction is the most important and challenging step because discriminative features influence the classifier performance and decrease the computational time. Nonetheless, current handcrafted acoustic features suffer from limited capability and accuracy in constructing a SER system for real-time implementation. Therefore, to overcome the limitations of handcrafted features, in recent years, variety of deep learning techniques have been proposed and employed for automatic feature extraction in the field of emotion prediction from speech signals. However, to the best of our knowledge, there is no in-depth review study is available that critically appraises and summarizes the existing deep learning techniques with their strengths and weaknesses for SER. Hence, this study aims to present a comprehensive review of deep learning techniques, uniqueness, benefits and their limitations for SER. Moreover, this review study also presents speech processing techniques, performance measures and publicly available emotional speech databases. Furthermore, this review also discusses the significance of the findings of the primary studies. Finally, it also presents open research issues and challenges that need significant research efforts and enhancements in the field of SER systems.

     

Modified particle swarm optimization and fuzzy regularization for pseudo de-convolution of spatially variant blurs

We propose a modified particle swarm optimization (MPSO) based method for Pseudo De-convolution of the ill-posed inverse problem namely, the space-variant image degradation (SVD). In this paper, SVD is simulated by the pseudo convolution of different sub-regions of the image with different known blurring kernels and additive random noise with unknown variance. Two heuristic modifications are proposed in PSO: 1) Initialization of the swarm and 2) Mutation of the global best. Fuzzy logic is applied for the computation of regularization parameter (RP) to cater for the sensitivity of the problem. The computation of RP is crucial due to the additive noise in the SVD image. Thus mathematical morphology (MM) is applied for better extraction of spatial activity from the distorted image. The performance of the proposed method is evaluated with different test images and noise powers. Comparative analysis demonstrates the superiority of proposed restoration, in terms of quantitative measures, over well-known existing and state-of-the-art SVD approaches.     

Qualified,But Not Choosing STEM at University: Unconscious Influences on Choice of Study

Abstract

This article offers explanations as to why good candidates for mathematics or physics degrees might opt to study subjects other than STEM (science, technology, engineering, mathematics) subjects at university. Results come from analysis, informed by psychoanalytic theory and practice, of narrative-style interviews conducted with first-year undergraduates and from survey data. It is argued that psychoanalytic interpretations have a role in educational research. Also, it is shown that unconscious forces influenced young peoples’ decision making. Implications for policy are discussed, in particular, the issues of (a) the role of commitment and (b) being good enough to study a STEM discipline.     

Infrared Spectroscopy-Based Chemometric Analysis for Lard Differentiation in Meat Samples

One of the most pressing concerns for the consumer market is the detection of adulteration in meat products due to their preciousness. The rapid and accurate identification mechanism for lard adulteration in meat products is highly necessary, for developing a mechanism trusted by consumers and that can be used to make a definitive diagnosis. Fourier Transform Infrared Spectroscopy (FTIR) is used in this work to identify lard adulteration in cow, lamb, and chicken samples. A simplified extraction method was implied to obtain the lipids from pure and adulterated meat. Adulterated samples were obtained by mixing lard with chicken, lamb, and beef with different concentrations (10%–50% v/v). Principal component analysis (PCA) and partial least square (PLS) were used to develop a calibration model at 800–3500 cm⁻¹. Three-dimension PCA was successfully used by dividing the spectrum in three regions to classify lard meat adulteration in chicken, lamb, and beef samples. The corresponding FTIR peaks for the lard have been observed at 1159.6, 1743.4, 2853.1, and 2922.5 cm⁻¹, which differentiate chicken, lamb, and beef samples. The wavenumbers offer the highest determination coefficient R² value of 0.846 and lowest root mean square error of calibration (RMSEC) and root mean square error prediction (RMSEP) with an accuracy of 84.6%. Even the tiniest fat adulteration up to 10% can be reliably discovered using this methodology.     

Lipid Class and Fatty Acid Composition of Psoralia corylifolia Seed

The purified crude lipid of Psoralia corylifolia seeds was subjected to lipid class and fatty acid analysis by thin layer and gas chromatography. The lipid classes identified were triacyl glycerol, free fatty acid, diacyl glycerol, mono acyl glycerol, hydrocarbon-waxester and polar lipid fractions. Most of the fractions were found to contain high level of C_18:1 while C_18:0, C_18:3 and C_20:0 were also found to be present in all the lipid fractions. It has been observed that the diacyl and monoacyl glycerol fractions contain significant amounts of C_14:0 and C_18:0 while the hydrocarbon-waxester fraction was rich in C_22:0. The polar lipids contain high level of C_18:3 and low level of C_18:1 as compared to other lipid fractions. The fatty acid composition of the whole oil was also determined and found to be similar to other fractions. Unidentified long chain fatty acids were also present in significant amounts in all the lipid fractions.     

Adaptive Automated Teller Machines

Nowadays, Automated Teller Machines (ATMs) provide significant online support to bank customers. A limitation of ATM usage is that customers often have to wait in a queue, especially at ATMs installed at busy locations. Also, old people tend to consume more ATM usage time, possibly frustrating customers in the queue. In these situations, ATMs should “adapt” to the behavior of the customers to minimize the usage time. To this end, we apply data mining techniques to an ATM transaction dataset obtained from an international bank based in Kuwait. We pre-process this dataset, and convert it into a specific XML format to mine it through the ProM (process mining) tool. Our results reveal that customers withdraw money most frequently, followed by purchases (through an ATM card) and balance inquiry transactions. Customers re-do these transactions frequently, and also employ them one after the other. We acquire the distributions of the withdrawn amount, based on individual customers, the location (ATM terminal) and time of the withdrawl. Based on these results, we have proposed a set of five adaptive ATM interfaces, which show only frequent transactions and frequently-withdrawn amounts, display the current balance autonomously, and query explicitly for viewing purchase history, or for performing another withdrawl. An online survey on 216 ATM customers reveals that a majority of customers are willing to use these interfaces for minimizing their usage time. Our work has been approved by the banking authority of Pakistan, and we are currently implementing our interfaces for a Pakistani bank.     

Experimental quadrotor flight performance using computationally efficient and recursively feasible linear model predictive control

A new linear model predictive control (MPC) algorithm in a state-space framework is presented based on the fusion of two past MPC control laws: steady-state optimal MPC (SSOMPC) and Laguerre optimal MPC (LOMPC). The new controller, SSLOMPC, is demonstrated to have improved feasibility, tracking performance and computation time than its predecessors. This is verified in both simulation and practical experimentation on a quadrotor unmanned air vehicle in an indoor motion-capture testbed. The performance of the control law is experimentally compared with proportional-integral-derivative (PID) and linear quadratic regulator (LQR) controllers in an unconstrained square manoeuvre. The use of soft control output and hard control input constraints is also examined in single and dual constrained manoeuvres.