Temperature-dependent diffusion coefficient of soluble substances during ethanol extraction of clove

The temperature dependence of the diffusion coefficient of ethanol-soluble substances from ground cloves (particle size 250 μm) during extraction was estimated by fitting batch extraction data at several temperatures (27.8, 40, 50, and 60°C) to a previously developed mass transfer model. The model was based on spherical geometry of particles. Nonlinear regression analysis was used to develop an equation that describes the diffusivity as a function of temperature. The temperature dependence ofD _A was of the Arrhenius type.     

Solvent-assisted low pressure room temperature lamination of low temperature cofirable ceramic green tapes for formation of embedded micro channels

Low temperature cofired ceramic substrates are becoming increasingly attractive for high density electric circuits and microsystems. Embedded micro patterns such as channels and cavities in ceramic substrates are indispensable for circuit cooling and media transportation. One of process challenges is how to make these embedded micro channels and cavities, which would be collapsed or deformed under conventional lamination. This paper reports on a novel solvent-assisted lamination that could provide low pressure and room temperature lamination of ceramic green tapes. The solvent used in this study was turpentine oil, which demonstrated a proper capability of dissolving polymeric additives on surface of green tapes without obviously changing the distribution of ceramic particles. Procedures for forming embedded micro channels in ceramic green substrates include micro embossing to create open channels, coating of turpentine solvent, followed by low pressure and room temperature lamination. Embedded micro channels with channel width ranging from 25 to 1,000 μm were obtained in ceramic green substrates; Depths of embedded channels shrank by 3–12% versus embossed depths due to turpentine-assisted lamination. The ceramic green substrates with embedded channels were then sintered under a standard cofiring process.     

Solution of laplace equation by the method of separation of variables

Abstract

The Laplace equation, which is used to describe the problem of two‐dimensional heat conduction with appropriate boundary conditions at steady state, is solved in this work by applying the method of separation of variables. The primary objective of this work involves discussing the effects of the constant value of the separation of variables (p) and the sequential order of substituting boundary conditions on the solution. Without appropriately arranging the sequential order of substituting the boundary conditions, the solution for non‐zero constant values of separation of variables (p) can not be obtained. For a zero value for the constant of the separation of variables, the solution obtained is trivial or does not exist. Solutions in different forms are obtained by using different values for the constant of the separation of variables (p) and for the sequential orders of substituting the boundary conditions.     

A study on physical and mechanical properties for soft to firm clays in Yangon area – Properties of clays deposit at the sedimentary basins in Myanmar

Recently, a great deal of foreign investment has been entered into construction of the social infrastructure of Myanmar. Many construction projects are therefore on-going, and these are especially planned in the Yangon area. While these construction booms are increasing, existing studies on the geotechnical problems in the Yangon area such as problematic soils like soft clays are limited at present. Information on soil properties has also not been shared and has been confined to individual projects. In this paper, the boring and laboratory tests carried out in the Yangon area are selected and focused upon among the tests carried out in Myanmar. Laboratory test results for clay deposits in the Yangon area are analyzed and the differences in soil properties between different sedimentary basins and sub-areas divided by the Tertiary sediment ridge that runs from north to south at the center of Yangon are clarified together with a comparison to the clays found in other countries, which have been previously investigated.     

Chitosan-Modified Poly(2,6-dimethyl-1,4-phenylene Oxide) for Anion-Exchange Membrane in Fuel Cell Technology

A series of cross-linking chitosan-modified quaternary ammonium poly(2,6-dimethyl-1,4-phenylene oxide)s membranes (CS-QAPPO) were prepared by the Menshutkin reaction. The mechanical property, dimensional stability, and alkaline stability of the CS-QAPPO membrane have been impressively improved by introducing CS into PPO backbone. Even the hydroxide conductivity of CS-QAPPO membranes is higher than that of the pristine QAPPO membrane. The 20% chitosan-modified QAPPO membrane shows the best performance, and the hydroxide conductivity is 32 mS cm^?1 at 90°C. The alkaline stability measurements demonstrated excellent chemical stability of the CS-QAPPO membrane in 2?M NaOH solution at room temperature after 2,000?h.     

Physical characteristics of pig fat and their relation to fatty acid composition

One hundred and five samples of pig backfat were assessed for appearance (colour and translucency) and hardness. The fatty acid profile of a selected subset of 50 samples was determined. Increased yellow colour was associated with increased linoleic and α-linolenic acid percentages. Increased translucency and fat softness were associated with decreased percentages of palmitic and stearic and oleic acid and a concurrent increase in the proportions of linoleic and α-linolenic acid. Oleic acid was found to be the single highest component (33.0-45.4%) and linoleic to show the greatest variation in range (9.8-28.4%).