Pressureless low temperature sintering of nanocrystalline zirconia ceramics via dry powder processing

Pressureless sintering approaches provide a simple avenue to manufacture dense ceramic parts with minimal processing equipment, but current pressureless sintering techniques have yet to demonstrate capabilities of producing dense ceramics while maintaining sub-50 nm grain sizes. Nanocrystalline yttria stablized zirconia ceramics were process from 4 mol% yttria stablized zirconia (4YSZ) nanopowders with a crystallite size of 7.5 nm using dry cold isostatic pressing (CIP) where powders are dried immediately prior to green compact formation and CIP vacuum bagging. It is shown that CIP pressures >75 000 psi (517 MPa) effectively remove pores larger than 100 nm and that pressureless sintering occurs at reduced temperatures for green densities ≥50%. Though the sintering kinetics are shown to be similar to other zirconia nanopowder sintering studies, the small initial crystallize size and reduced sintering temperature allowed densities as high as 97.2%, while retaining a ceramic grain size at or below 40 nm. Produced nanocrystalline 4YSZ ceramics with a grain size of 30.3 nm and a density of 96.3% had Vicker's hardnesses as high as 14.2 GPa and Vicker's indentation fracture resistance of 3.43 MPa·, demonstrating that simple processing approaches can be refined to fabricate nanocrystalline ceramics while maintaining high hardness and indentation fracture resistance.     

Compact and unified hardware architecture for SHA-1 and SHA-256 of trusted mobile computing

This paper presents a compact and unified hardware architecture implementing SHA-1 and SHA-256 algorithms that is suitable for the mobile trusted module (MTM), which should satisfy small area and low-power condition. The built-in hardware hash engine in a MTM is one of the most important circuit blocks and dominates the performance of the whole platform because it is used as a key primitive to support most MTM commands concerning to the platform integrity and the command authentication. Unlike the general trusted platform module (TPM) for PCs, the MTM, that is to be employed in mobile devices, has very stringent limitations with respect to available power, circuit area, and so on. Therefore, MTM needs the spatially optimized architecture and design method for the construction of a compact SHA hardware. The proposed hardware for unified SHA-1 and SHA-256 component can compute a sequence of 512-bit data blocks and has been implemented into 12,400 gates of 0.25 μm CMOS process. Furthermore, in the processing speed and power consumption, it shows the better performance in comparison with commercial TPM chips and software-only implementation. The highest operation frequency and throughput of the proposed architecture are 137 MHz and 197.6 Mbps, respectively, which satisfy the processing requirement for the mobile application.     

Piezoelectric Sensors Operating at Very High Temperatures and in Extreme Environments Made of Flexible Ultrawide-Bandgap Single-Crystalline AlN Thin Films

Extreme environments are often faced in energy, transportation, aerospace, and defense applications and pose a technical challenge in sensing. Piezoelectric sensor based on single-crystalline AlN transducers is developed to address this challenge. The pressure sensor shows high sensitivities of 0.4–0.5 mV per psi up to 900 °C and output voltages from 73.3 to 143.2 mV for input gas pressure range of 50 to 200 psi at 800 °C. The sensitivity and output voltage also exhibit the dependence on temperature due to two origins. A decrease in elastic modulus (Young's modulus) of the diaphragm slightly enhances the sensitivity and the generation of free carriers degrades the voltage output beyond 800 °C, which also matches with theoretical estimation. The performance characteristics of the sensor are also compared with polycrystalline AlN and single-crystalline GaN thin films to investigate the importance of single crystallinity on the piezoelectric effect and bandgap energy-related free carrier generation in piezoelectric devices for high-temperature operation. The operation of the sensor at 900 °C is amongst the highest for pressure sensors and the inherent properties of AlN including chemical and thermal stability and radiation resistance indicate this approach offers a new solution for sensing in extreme environments.     

The Effect of Curcuma phaeocaulis Valeton (Zingiberaceae) Extract on Prion Propagation in Cell-Based and Animal Models

Prion diseases are neurodegenerative disorders in humans and animals for which no therapies are currently available. Here, we report that Curcuma phaeocaulis Valeton (Zingiberaceae) (CpV) extract was partly effective in decreasing prion aggregation and propagation in both in vitro and in vivo models. CpV extract inhibited self-aggregation of recombinant prion protein (PrP) in a test tube assay and decreased the accumulation of scrapie PrP (PrP^Sc) in ScN2a cells, a cultured neuroblastoma cell line with chronic prion infection, in a concentration-dependent manner. CpV extract also modified the course of the disease in mice inoculated with mouse-adapted scrapie prions, completely preventing the onset of prion disease in three of eight mice. Biochemical and neuropathological analyses revealed a statistically significant reduction in PrP^Sc accumulation, spongiosis, astrogliosis, and microglia activation in the brains of mice that avoided disease onset. Furthermore, PrP^Sc accumulation in the spleen of mice was also reduced. CpV extract precluded prion infection in cultured cells as demonstrated by the modified standard scrapie cell assay. This study suggests that CpV extract could contribute to investigating the modulation of prion propagation.     

Cooling effect of oil cooling method on electric vehicle motors with hairpin winding

Journal of Mechanical Science and Technology - The cooling effect of oil cooling method on electric vehicle motors with hairpin winding is analyzed. A 160 kW motor being developed by a commercial...     

The effect of damper leakage and fire size on the performance of smoke control system in high-rise building

Journal of Mechanical Science and Technology - The major function of smoke control system is to prevent smoke from penetrating to vertical shaft or stairwell by pressurizing vestibule where is...     

Polymeric waveguide polarization splitter with a buriedbirefringent polymer

A waveguide polarization splitter is demonstrated based on a low-loss polymer waveguide and a birefringent polyimide. Crosslinkable fluorinated polymers with an excellent stability and a low absorption loss are utilized for the device. The polyimide is buried under one branch of the Y-branch waveguide to enhance the birefringence between the TE and TM modes. By the adiabatic mode evolution, the TE mode is coupled to the branch with the polyimide strip, while the TM mode propagates through the other branch without the polyimide. For the device with a branch angle of 1/400 rad, we obtained a crosstalk less than -20 dB and a fiber-to-fiber insertion loss of 3.8 dB     

Debonding failure characteristics of multi-laminated bonding system under cryogenic temperature

In the present paper, the debonding failure characteristics of epoxy and polyurethane adhesives embedded using a multi-laminated bonding system (MLBS) under cryogenic temperatures are evaluated. A series of pull-off and lap-shear tests under various temperatures (293, 163, and 110 K) are performed to identify the debonding failure characteristics of the MLBS. A modification of the Ramberg-Osgood constitutive model is carried out to predict the temperature-dependant elastic-inelastic stress-strain behaviour of the MLBS. The temperature-dependant material parameters are predicted using an empirical formulation. The debonding failure phenomenon is also studied.     

Growth of InGaN HBTs by MOCVD

The design and growth of GaN/InGaN heterojunction bipolar transistors (HBTs) by metalorganic chemical vapor deposition (MOCVD) are studied. Atomic-force microscopy (AFM) images of p⁺InGaN base layers (∼100 nm) deposited under various growth conditions indicate that the optimal growth temperature is limited to the range between 810 and 830°C due to a trade-off between surface roughness and indium incorporation. At these temperatures, the growth pressure must be kept above 300 Torr in order to keep surface pit density under control. An InGaN graded-composition emitter is adopted in order to reduce the number of V-shaped defects, which appear at the interface between GaN emitter and InGaN base and render an abrupt emitter-base heterojunction nearly impossible. However, the device performance is severely limited by the high p-type base contact resistance due to surface etching damage, which resulted from the emitter mesa etch.     

An evaluation of radiation damage to solid state components flown in low earth orbit satellites

The effects of total ionising radiation dose upon commercial off-the-shelf semiconductors fitted to satellites operating in low Earth orbit (LEO) conditions was evaluated. The evaluation was performed for the Korea Institute of Technology SATellite-1, (KITSAT-1) which was equipped with commercial solid state components. Two approximate calculation models for space radiation shielding were developed. Verification was performed by comparing the results with detailed three-dimensional calculations using the Monte-Carlo method and measured data from KITSAT-1. It was confirmed that the developed approximate models were reliable for satellite shielding calculations. It was also found that commercial semiconductor devices, which were not radiation hardened, could be damaged within their lifetime due to the total ionising dose they are subject to in the LEO environment. To conclude, an intensive shielding analysis should be considered when commercial devices are used.