Experimental analysis of the influence of the voltage waveform on ozone generation efficiency

Although the dielectric barrier discharge (DBD) has been widely considered and studied for ozone generation, only a few studies have examined the influence of the alternating voltage waveform on the ozone rate production. This paper analyses the influence of the voltage shape on the ozone concentration and the energy efficiency of a DBD cylindrical ozone generator. Three voltage signals were studied using a high-voltage amplifier: sinusoidal, triangular and rectangular signals with voltage values up to 8 kV and frequencies up to 1.1 kHz. The obtained results showed that the efficiency of the ozone generator depends strongly on the type of the voltage waveform. The maximum values of the energy efficiency and the ozone concentration were obtained with the triangular voltage signal. This wave shape configuration has been successfully used for discolouration of water contaminated by textile dye.     

Preparation of chitosan‐g‐poly(acrylamide)/montmorillonite superabsorbent polymer composites: Studies on swelling,thermal, and antibacterial properties

Superabsorbent composites based on chitosan‐g‐poly(acrylamide) and montorillonite (CTS‐g‐PAAm/MMT) were synthesized through in situ radical polymerization by grafting of crosslinked acrylamide onto chitosan backbone in presence of MMT at different contents. The formation of the grafted network was confirmed by attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR), thermogravimetric analysis (TGA), and differential scanning calorimetery (DSC). The obtained porous structure was observed by scanning electron microscope (SEM). The presence of clay and its interaction with chitosan‐g‐poly(acrylamide) (CTS‐g‐PAAm) matrix was evidenced by ATR‐FTIR analysis. The morphology was investigated by both X‐ray diffraction (XRD) and SEM analyses. It was suggested the formation of mostly exfoliated structures with more porous structures. Besides, the thermal stability of these composites, observed by TGA analysis, was slightly affected by the clay loading as compared to the matrix. These hydrogel composites were also hydrolyzed to achieve anionic hydrogels with ampholytic properties. Swelling behaviors were examined in doubly distilled water, 0.9 wt % NaCl solution and buffer solutions. The water absorbency of all superabsorbent composites was enhanced by adding clay, where the maximum was reached at 5 wt % of MMT. Their hydrolysis has not only greatly optimized their absorption capacity but also improved their swelling rate and salt‐resistant ability. The hydrolyzed superabsorbent showed better pH‐sensitivity than the unhydrolyzed counterparts. The results of the antibacterial activity of these superabsorbents composites against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), assayed by the inhibitory zone tests, have showed moderate inhibition of the bacteria growth. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39747.     

Study of effect of old corrugated cardboard in properties of polypropylene composites: Study of mechanical properties,thermal behavior,and morphological properties

The investigation of the economical use of lignocellulose waste, which is one of the environmental problems facing nations, is ongoing. In this study, waste cardboard paper fiber reinforcing polypropylene (PP) composites was developed. In order to modify the PP matrix maleated PP (MA‐g‐PP) a 5 wt% and a grafting rate of 1 and 2 wt% was used as a compatibilizer. The effects of fiber and compatibilizer content as well as graft content are evaluated by mechanical, thermal property measurements, and scanning electron microscopy (SEM). The compatibilizer improved all mechanical properties significantly. Thus, the tensile strength of MA‐g‐PP‐containing composites increases compared to PP/cardboard composites paper content increases. However, the tensile modulus of a PP‐based composite increases with an increase in paper fiber with the compatibilizer having little effect. SEM revealed that the addition of MA‐g‐PP generates strong interactions between a PP matrix and paper fibers. However, the addition of the MA‐g‐PP compatibilizing agent gives a significant improvement on the crystallization of the composites, whereas the compatibilized PP/old corrugated cardboard (OCC) composites have higher crystallinity (Xc) than uncompatibilized PP/OCC composites. The MA‐g‐PP also diminished the water absorption in the composites. J. VINYL ADDIT. TECHNOL., 22:231–238, 2016. © 2014 Society of Plastics Engineers     

Optimal Sizing of a DBD Ozone Generator Using Response Surface Modeling

Dielectric barrier discharge (DBD) reactors used as ozone generators are well known today and widely used for water treatment and air disinfection. The purpose of this article is to propose an experimental procedure based on the response surface modeling in order to optimize the geometrical dimensions of the cylindrical shape ozone generator, i.e., the discharge gap and the electrodes length. Because an effective ozone generator is expected to give high ozone concentration with a minimum of power requirements, the applied high voltage was associated with the geometrical parameters to carry out a composite centered faces design. Obtained results indicate that for an efficient ozone generator, length of the electrodes needs to be optimized while the discharge gap should be minimized.     

Degradation of Atenolol in a Rectangular Staircase Photocatalytic Reactor with Immobilized ZnO

Atenolol (ATL) was removed with a rectangular staircase photocatalytic reactor (RSPR) using immobilized ZnO under solar irradiation. The effects of operational parameters such as flow rate, pH, and initial ATL concentration were examined. The highest degradation was obtained after 240 min photocatalytic reaction. The effects of different scavengers proved that the ATL degradation was mainly due to the direct oxidization with OH^? radicals, whereas, the h⁺ and O₂^?? radicals played a minor role in the degradation process. Five repetitive operations of RSPR allowed for reaching 77 ± 3 % degradation of ATL for each cycle. Kinetic data indicated that the photocatalytic kinetics followed the global matter balance model.     

MRI aspect of hepatic adenomatosis

We report a case of hepatic adenomatosis demonstrated with MR imaging. The diagnosis can be suspected when this technique shows multiple hepatic lesions which present an iso-signal intensity on T1-wi, a hyperintense signal on T2-wi and rapid wash-in and wash-out of gadolinium. Injection of superparamagnetic iron oxide mag be useful in the characterization of the lesion: a decreased signal intensity after injection rules out the diagnosis of metastasis. Because of the unknown course of hepatic adenomatosis, histological proof and radiological follow-up are recommended.     

Comparative Experimental Study between Surface and Volume DBD Ozone Generator

Volume Dielectric Barrier Discharge (DBD) is nowadays considered the most effective way for ozone generation in the industry. Some papers were published only on surface discharge reactors applied for ozone generation. This article describes an experimental investigation for the comparison between these two reactor types of ozone generation. Two surface and volume DBD reactors of cylindrical shape were used in the same experimental conditions. Obtained results showed that although the majority of ozone generators are of volume discharge type, the surface DBD presents significant superiority in terms of ozone generation and energy efficiency.     

Numerically accurate code synthesis for Gauss pivoting method to solve linear systems coming from mechanics

In numerical analysis of mechanical problems, we usually have to solve huge linear systems, which may be non-symmetric or ill-conditioned. For these reasons, it is necessary to develop original and domain specific approaches to treat these family of systems. In this work, we introduce a new methodology to synthesize numerically accurate programs for the Gauss pivoting method. The synthesis is based on program transformation techniques and it is guided in its estimation of accuracy by interval arithmetic that computes the propagation of roundoff errors. We apply our code synthesis to the resolution of systems coming from finite element method arising from problems of Mechanics. We test our synthesizer on two problems concerning the flexion of a beam and the sliding contact of a viscoelastic body on a rigid foundation. Our experimental results show that the specialized synthesized code to solve the families of systems given in input is far more accurate and faster than the standard implementation of the Gauss method.     

Deinked and acetylated fiber of newspapers

Recently, the incorporation of lignocellulosic materials as reinforcing agents or as fillers in polymer composites has received an increased attention. Although natural fibers have a number of advantages over glass fibers, the strong polar character of their surface is a limiting factor, as compatibility with strongly apolar thermoplastic matrices is very low. Such problems of incompatibility may be overcome with fiber pretreatments, which can enhance compatibility, albeit having a negative impact on the economics. In this study, the newspaper is deinked and acetylated. The effect of esterification between the acetyl groups and the hydroxyl groups of the fiber was examined by Fourier transform infrared. X‐ray diffraction and scanning electron microscopy were used to characterize the crystallinity and the surface morphology of the untreated deinked and acetylated fibers (newspaper). The thermal stability of deinked and acetylated fibers was slightly decreased. It was also shown that the deinking increased the crystallinity of newspaper fibers while acetylating decreased this crystallinity. Cellulose acetate is one of the most important cellulose derivatives and its main applications are its use in composites. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Unsupervised variational image segmentation/classification using a Weibull observation model.

Studies have shown that the Weibull distribution can model accurately a wide variety of images. Its parameters index a family of distributions which includes the exponential and approximations of the Gaussian and the Raleigh models widely used in image segmentation. This study investigates the Weibull distribution in unsupervised image segmentation and classification by a variational method. The data term of the segmentation functional measures the conformity of the image intensity in each region to a Weibull distribution whose parameters are determined jointly with the segmentation. Minimization of the functional is implemented by active curves via level sets and consists of iterations of two consecutive steps: curve evolution via Euler-Lagrange descent equations and evaluation of the Weibull distribution parameters. Experiments with synthetic and real images are described which verify the validity of method and its implementation.