Synthesis,characterization and charge transport properties of Pr–Ni Co-doped SrFe2O4 spinel for high frequency devices applications

Ferrites are materials of interest due to their broad applications in high technological devices and a lot of research has been focused to synthesize new ferrites. In this regard, an effort has been devoted to synthesize spinel Pr–Ni co-substituted strontium ferrites with a nominal formula of Sr_1-xPr_xFe_2-yNi_yO₄ (0.0 ≤ x ≤ 0.1, 0.0 ≤ y ≤ 1.0). The cubic structure of pure and Pr–Ni co-substituted strontium ferrite samples calcinated at 1073 K for 3 h has been confirmed through X-ray diffraction (XRD). Average sizes of crystallites (18–25 nm) have been estimated from XRD analysis and nanometer particle sizes of synthesized ferrites have been further verified by scanning electron microscopy (SEM). SEM results have also shown that particles are mostly agglomerated and all the samples possess porosity. It has been observed that at 298 K, the values of resistivity (ρ) increase, while that of AC conductivity, dielectric loss, and dielectric constants decrease with increasing amounts of Pr³⁺ and Ni²⁺ ions. The values of dielectric parameters initially decrease with frequency and later become constant and can be explained on the basis of dielectric polarization. Electrochemical impedance spectroscopy (EIS) studies show that the charge transport phenomenon in ferrite materials is mainly controlled via grain boundaries. Overall, synthesized ferrite materials own enhanced resistivity values in the range of 1.38 × 10⁹–1.94 × 10⁹ Ω cm and minimum dielectric losses, which makes them suitable candidates for high frequency devices applications.     

Boosting the activity of FeOOH via integration of ZIF-12 and graphene to efficiently catalyze the oxygen evolution reaction

Transition metal oxyhydroxides have been used as promising electrocatalysts for water splitting however, their catalytic activity is restricted due to low surface area and poor conductivity. Herein, we report novel composite FeOOH@ZIF-12/graphene composite as electrocatalyst for water oxidation, whereby ZIF-12 provide extra surface for the FeOOH dispersion whilst graphene act as excellent electron mediator. The composite shows a low overpotential value of 291 mV to attain a current density of 10 mA cm^?2 and a low Tafel slope value of 78 mV dec^?1. The catalyst offers a maximum current density of 101 mA cm^?2, while it gives a turnover frequency (TOF) value of 0.031 s^?1 at an overpotential of 291 mV only. The excellent activity and remarkable stability of composite is attributed to highly conductive and porous support.     

Novel Organometallic Aromatic Azo Polyesters Based on Ferrocene

Some ferrocene containing aromatic azo polyesters were prepared by condensing 1,1-ferrocenedicarbonyl chloride with different azo groups containing aromatic diols, which were synthesized by diazotization coupling reaction from aromatic diamines. The polymeric products were separated as two portions on the basis of their solubility and subsequently characterized by their elemental analysis and FTIR spectral studies. Thermal properties of the products were measured by differential scanning calorimetry and thermogravimetry and the activation energies of pyrolysis were calculated using Horowitz and Metzger's method. The molecular weights of the soluble portions were determined by gel permeation chromatography (GPC) and these portions were also characterized by their inherent viscosities and UV-Vis spectroscopic studies.     

Biomathematical study of time-dependent flow of a Carreau nanofluid through inclined catheterized arteries with overlapping stenosis

Journal of Central South University - This work is concerned with the analysis of blood flow through inclined catheterized arteries having a balloon (angioplasty) with time-variant overlapping...     

Citizens’ Adoption Behavior of Mobile Government (mGov): A Cross-Cultural Study

This study aims to address the paradigms of consumers’ adoption behavior for mobile government, posits the factors which pursue citizens’ intention to adopt mobile government services, and reveals the impact of cultural dimensions in perceiving driving factors of mobile government adoption. The mobile government adoption model was developed and tested among users of three different countries, namely Bangladesh, Canada, and Germany. The finding suggests the rationale that cross-cultural differences impact consumers’ perception of mobile government adoption behavior.     

Assessment of organic acid-rich bio-sap to generate electricity

The study has focused on electricity generation from organic acid-rich bio-substrate like star fruit (Averrhoa carambola). The sap of star fruit was selected as an electrolyte due to the presence of significant amounts of organic acids such as citric acid and ascorbic acid. To preserve the sap, 2% phenol by volume was used to reduce the growth of microorganisms, and the addition of phenol did not affect the initial pH. It was observed that due to an increase in the electrode surface area, reaction rate and current generation had been amplified. Internal resistance also decreased rapidly because of the large electrode surface area. Furthermore, internal resistance was the significant barrier in electricity generation, which was also successfully controlled by the baffle flow agitation system. Moreover, the baffle flow agitation system reduces the formation of dead zones and increases the total dissolved solids inside the electrochemical cell compartments during operation.     

Service delivery through mobile-government (mGov): Driving factors and cultural impacts

The mobile-Government (mGov) service system is conducted through an open network, and it is virtual. This service mode and pattern change inevitably necessitates a behavioral change in citizen attitudes and intentions. Nevertheless, this new pattern of service delivery through mGov has hardly been systematically investigated by any researchers. The objective of this current research is twofold. First, we attempt to reveal the sources of beliefs for developing intention toward the mGov (ITM) system. Then, as the second objective, we investigate cultural influence as the reason for a difference in consumer attitudes and intentions toward mGov. In this regard, the empirical study was conducted in Bangladesh and the USA, which have potential differences in the cultural traits listed by Hofstede. From our statistical analysis, we have identified the sources of beliefs for both Bangladeshi and USA consumers. We observed clear differences in sources of beliefs and their influence on attitudes leading to intention, which demonstrates support for our second objective which was designed to verify the cultural impacts on belief-attitude relations. We understand that these different sources of beliefs influence cognitive, affective, and connative attitudes toward mGov in different ways.     

Boosting the performance of visible light‐driven WO3/g‐C3N4 anchored with BiVO4 nanoparticles for photocatalytic hydrogen evolution

In this article, a ternary WO₃/g‐C₃N₄@ BiVO₄ composites were prepared using eco‐friendly hydrothermal method to produce efficient hydrogen energy through water in the presence of sacrificial agents. The prepared samples were characterized by scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), ultraviolet‐visible (UV‐vis), Brunauer‐Emmett‐Teller (BET) surface area, and photoluminescence spectroscopy (PL) emission spectroscopy. The experimental study envisages the formation of 2‐D nanostructures and observed that such kinds of nanostructures could provide more active sites for photocatalytic reduction of water and their inherent reactive‐species mechanism. The results showed the excellent photocatalytic performance (432 μmol h^?1 g^?1) for 1.5% BiVO₄ nanoparticles in WO₃/g‐C₃N₄ composite when compared with pure WO₃ and BiVO₄. The optical properties and photocatalytic activity measurement confirmed that BiVO₄ nanoparticles in WO₃/g‐C₃N₄ photocatalyst inhibited the recombination of photogenerated electron and holes and enhanced the reduction reactions for H₂ production. The enhanced photocatalytic efficiency of the composite nanostructures may be attributed to wide absorption region of visible light, large surface area, and efficient separation of electrons/holes pairs owing to synergistic effects between BiVO₄ and WO₃/g‐C₃N₄. The prepared samples would be a precise optimal photocatalyst to increase their suppliers for worldwide applications especially in energy harvesting.