Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

A fog-based security framework for intelligent traffic light control system

Multimedia Tools and Applications - The world is facing many problems including that of traffic congestion. To highlight the issue of traffic congestion worldwide specially in urban areas and to...     

Effect of Boronizing on Operating Stability of Steel AISI 304L under Erosion Impact of Hard Particles

Metal Science and Heat Treatment - The effect of solid boronizing at 950°C for 2 and 4 h on the phase composition, microstructure, hardness and abrasive wear of steel AISI 304L is studied...     

Analysis of surface layers on bioactive glasses

FT-Raman spectroscopy proves to be a powerful technique to study surface reactions on bioactive glasses and it eliminates the fluorescence of the organic phase of whole bone, thereby making it possible to compare the reaction layers formed on bioactive glasses with the mineral phase of bone. The spectrum of hydroxycarbonate apatite (HCA) developed on the bioactive glasses is closer to that of bone than synthetic hydroxyapatite (HA) and closely matches that of bone mineral obtained by deproteination of whole human femoral cortical bone.     

Improving security of the Internet of Things via RF fingerprinting based device identification system

Neural Computing and Applications - Security is one of the primary concerns when designing wireless networks. Along detecting user identity, it is also important to detect the devices at the...     

Uncertainty modeling and robust minimax LQR control of multivariable nonlinear systems with application to hypersonic flight

For a class of multi‐input and multi‐output nonlinear uncertainty systems, a novel approach to design a nonlinear controller using minimax linear quadratic regulator (LQR) control is proposed. The proposed method combines a feedback linearization method with the robust minimax LQR approach in the presence of time‐varying uncertain parameters. The uncertainties, which are assumed to satisfy a certain integral quadratic constraint condition, do not necessarily satisfy a generalized matching condition. The procedure consists of feedback linearization of the nominal model and linearization of the remaining nonlinear uncertain terms with respect to each individual uncertainty at a local operating point. This two‐stage linearization process, followed by a robust minimax LQR control design, provides a robustly stable closed loop system. To demonstrate the effectiveness of the proposed approach, an application study is provided for a flight control problem of an air‐breathing hypersonic flight vehicle (AHFV), where the outputs to be controlled are the longitudinal velocity and altitude, and the control variables are the throttle setting and elevator deflection. The proposed method is used to derive a linearized uncertainty model for the longitudinal motion dynamics of the AHFV first, and then a robust minimax LQR controller is designed, which is based on this uncertainty model. The controller is synthesized considering seven uncertain aerodynamic and inertial parameters. The stability and performance of the synthesized controller is evaluated numerically via single scenario simulations for particular cruise conditions as well as a Monte‐Carlo type simulation based on numerous cases. It is observed that the control scheme proposed in this paper performs better, especially from the aspect of robustness to large ranges of uncertainties, than some controller design schemes previously published in the literature. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society