The structure of a cast dental Ni-Cr-Be alloy

The structure of a typical dental Ni-Cr-Be alloy with 1.8 wt% Be has been investigated by SEM and TEM as well as by quantitative X-ray microanalyses in both instruments. Due to its low atomic weight the atomic fraction of Be is as high as 0.10. During solidification beryllium segregates substantially, and a large volume fraction of the casting is made up of a eutectic with coarse ( 1 µm diameter) alternating rods of fcc Ni-Cr and NiBe with a CsCl-type structure (ordered bcc). Smaller ( 0.1 µm diameter) rods of NiBe are precipitated in matrix in the solid state. Microanalyses of the NiBe rods show that they have a low chromium content ( 1.5 wt%). The cube boundary planes of the ordered b cc and fcc structures have a slight difference in orientation of about 7° which is most probably due to a small coherency misfit of the two types of lattices. The 100 directions in cube boundary plane of the fcc structure are nearly parallel to the 110 directions of the ordered bcc cube boundary plane. Sometimes another and more complex relationship between the two lattices occurs. The alloy contains 3.9 wt% Al which gives rise to numerous small ( 10 nm), spherical, ordered particles of Ni₃Al both in matrix as well as in the fcc eutectic rods.     

Robust tracking design based on adaptive fuzzy control of uncertain nonlinear MIMO systems with time delayed states

It is proposed here to use a robust tracking design based on adaptive fuzzy control technique to control a class of multi-input-multi-output (MIMO) nonlinear systems with time delayed uncertainty in which each uncertainty is assumed to be bounded by an unknown gain. This technique will overcome modeling inaccuracies, such as drag and friction losses, effect of time delayed uncertainty, as well as parameter uncertainties. The proposed control law is based on indirect adaptive fuzzy control. A fuzzy model is used to approximate the dynamics of the nonlinear MIMO system; then, two on-line estimation schemes are developed to overcome the nonlinearities and identify the gains of the delayed state uncertainties, simultaneously. The advantage of employing an adaptive fuzzy system is the use of linear analytical results instead of estimating nonlinear system functions with an online update law. The adaptive fuzzy scheme uses a Variable Structure (VS) scheme to resolve the system uncertainties, time delayed uncertainty and the external disturbances such that H_∞ tracking performance is achieved. The control laws are derived based on a Lyapunov criterion and the Riccati-inequality such that all states of the system are uniformly ultimately bounded (UUB). Therefore, the effect can be reduced to any prescribed level to achieve H _∞ tracking performance. A two-connected inverted pendulums system on carts and a two-degree-of-freedom mass-spring-damper system are used to validate the performance of the proposed fuzzy technique for the control of MIMO nonlinear systems.     

Highly Uniform Resistive Switching Properties of Solution‐Processed Silver‐Embedded Gelatin Thin Film

The silver‐embedded gelatin (AgG) thin film produced by the solution method of metal salts dissolved in gelatin is presented. Its simple fabrication method ensures the uniform distribution of Ag dots. Memory devices based on AgG exhibit good device performance, such as the ON/OFF ratio in excess of 10⁵ and the coefficient of variation in less of 50%. To further investigate the position of filament formation and the role of each element, current sensing atomic force microscopy (CSAFM) analysis as well as elemental line profiles across the two different conditions in the LRS and HRS are analyzed. The conductive and nonconductive regions in the current map of the CSAFM image show that the conductive filaments occur in the AgG layer around Ag dots. The migration of oxygen ions and the redox reaction of carbon are demonstrated to be the driving mechanism for the resistive switching of AgG memory devices. The results show that dissolving metal salts in gelatin is an effective way to achieve high‐performance organic–electronic applications.     

Transmission electron microscopy study of a dental gallium alloy

Analytical transmission electron microscopy (TEM) studies of a dental gallium alloy have been carried out. This commercial Ga alloy was made by triturating a Ag-Sn-Cu-rich alloy powder with a liquid Ga alloy containing Ga, In and Sn. Ga alloys are of increasing interest as an alternative to amalgam. The dental material studied in the present work was found to be a composite consisting of remaining, undissolved particles from the Ag-based alloy powder in a matrix of reaction products with the liquid Ga alloy. The phases in the matrix and the remaining Ag-based alloy particles have been identified by electron diffraction, high resolution electron microscopy and energy dispersive X-ray spectroscopy. the following phases were identified: orthorhombic Ag₃Sn, cubic -Cu₉Ga₄, cubic Ag₉In₄, tetragonal -Sn and hexagonal Ag₂Ga. In addition to these well-known phases Ga-rich regions of Cu-Ga were observed consisting of an intergrowth of the tetragonal CuGa₂ and one of the cubic -Cu₉Ga₄ phases.     

A constitutive model for saturated compacted soils under undrained shear condition

Abstract

In this paper, elasto‐plastic constitutive equations extended from theory of plasticity and based on laws of thermo‐dynamics were derived to predict the mechanical behavior of saturated geological media. Besides, these equations can also be adapted to form the stiffness matrix for finite element analysis on deformation and stress distribution in geotechnical engineering practice. The test data were obtained from compacted crushed mudstone under consolidated un‐drained triaxial tests with pore water pressure measurement. The preparation of the specimen was different from those which had usually been adopted. Hence, it is hoped that this study will throw some light on the constitutive equations applied on compacted geological media.     

Gasoline permeation resistance of the as‐blow‐molded and annealed polyethylene,polyethylene/polyamide,and polyethylene/modified polyamide bottles

An investigation of the gasoline permeation resistance of the as‐blow‐molded and annealed polyethylene, polyethylene (PE)/polyamide (PA), and polyethylene/modified polyamide (MPA) bottles is reported. The gasoline permeation resistance improves dramatically after blending PA and MPA barrier resins in PE matrices during blow‐molding, and the order of barrier improvement corresponds to the order of barrier improvement of the barrier resins added in PE. Somewhat unexpectedly, the gasoline permeation rates of the annealed PE and/or PE/PA bottles annealed at 90°C or higher temperatures increase significantly with the annealing temperature and time. On the contrary, the gasoline permeation resistance of the annealed PE/MPA bottles increase significantly as the annealing temperature and/or time increase. For instance, the gasoline permeation rate of the PE/MPA bottle annealed at 120°C for 32 h is about 190 times slower than that of the as‐blow‐molded PE bottle. Further investigations found that, after blending the MPA and PA barrier resins in PE matrices, the relatively nonpolar hydrocarbon components present in the gasoline fuels were significantly blocked, without permeation during the permeation tests, in which the as‐blow‐molded PE/MPA bottle inhibited the permeation of hydrocarbon components more successfully than did the as‐blow‐molded PE/PA bottle. In contrast, the amounts of polar components that permeated through the as‐blow‐molded PE/PA and PE/MPA bottles were very small and about the same as the amount that permeated through the as‐blow‐molded PE bottle. Possible mechanisms accounting for these interesting behaviors are proposed in this study. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2827–2837, 2001     

Structural and electrical characteristics of high-κ Er2O3 and Er2TiO5 gate dielectrics for a-IGZO thin-film transistors

In this letter, we investigated the structural and electrical characteristics of high-κ Er₂O₃ and Er₂TiO₅ gate dielectrics on the amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistor (TFT) devices. Compared with the Er₂O₃ dielectric, the a-IGZO TFT device incorporating an Er₂TiO₅ gate dielectric exhibited a low threshold voltage of 0.39 V, a high field-effect mobility of 8.8 cm²/Vs, a small subthreshold swing of 143 mV/decade, and a high I_on/I_off current ratio of 4.23 × 10⁷, presumably because of the reduction in the oxygen vacancies and the formation of the smooth surface roughness as a result of the incorporation of Ti into the Er₂TiO₅ film. Furthermore, the reliability of voltage stress can be improved using an Er₂TiO₅ gate dielectric.     

Micro-channel development and hydrogen adsorption properties in templated microporous carbons containing platinum nanoparticles

Ordered microporous carbons containing dispersed platinum nanoparticles were fabricated and chosen as suitable models to investigate micro-structure development and hydrogen transport properties of zeolite-templated carbons. X-ray photoelectron spectroscopy analysis revealed that the enhanced heat of adsorption is related to the narrow micro-channels templated from the zeolite and the presence of certain CO groups on the carbon. The lack of a well-defined and intense rotational transition line and the persistent broad H₂ recoil spectrum in neutron scattering results suggests a distribution of binding sites. Most interestingly, hydrogen diffusion occurs on two time scales, consisting of a fast liquid-like jump diffusion on the timescale of picoseconds along with an even faster bulk-like diffusion. The liquid-like motion is characterized by a diffusion constant of (2.1 ± 0.3) × 10⁻⁸ m²/s with an activation energy of ca. 77 K; both values indicate somewhat lower mobility than similar dynamics of H₂ on nanotubes, activated carbon XC-72, or Grafoil, yet greater mobility than that of bulk liquid. These unusual characteristics for hydrogen in carbons are believed to arise from the network of narrow pores in this zeolite-templated image of the zeolite. In fact, the diffusion constants of the templated carbons are extremely similar to those measured for zeolite 13X.     

Thermal, productive, and reproductive responses of high yielding cows exposed to short-term cooling in summer

Effect of cooling on body temperature, milk production, estrous behavior, and reproductive performance was examined in 66 estrous-synchronized, Israeli-Holstein dairy cows. Cooling was by an automated system, which actuated sprinkling (30 s) followed by forced ventilation (4.5 min) for 30-min periods. Cows were cooled 9 times/d between 0500 and 2100 h over 10 d, starting 1 d before expected estrus until d 8 post estrus. Cooling reduced typical diurnal rise of body temperature in summer heat-stressed cows by .5 to .9 degrees C, and body temperature was maintained close to normothermic temperature (38.6 degrees C). Milk production of cooled cows was 2.6 kg/d (+8%) above control at end of the cooling period. More cooled cows than noncooled exhibited standing estrous behavior; in noncooled cows, silent ovulations or anestrus were more frequent. Conception rate of cooled cows did not differ from control, suggesting need for a longer than a 10-d cooling period for improvement of fertility. The cooling system has potential to alleviate heat stress in dairy cows and to improve their thermal balance, productive, and reproductive performances.