Interfacial strength and chemistry of additive-free silicon nitride ceramics brazed with aluminium

Two kinds of additive-free silicon nitride ceramics were brazed with aluminium; one was with as-ground faying surfaces and the other was with faying surfaces heat-treated at 1073K for 1.8 ksec in air. The heat-treatment of the silicon nitride ceramics formed a silicon oxynitride layer on the faying surfaces and increased the brazing strength of the joints. A silica-alumina non-crystalline layer and a β′-sialon layer were formed successively from the aluminium side at the interface of the joints. The heat-treatment which made the former layer thicker is a necessary process in making reliable, strong brazed joints.     

Ecodesigns and applications for noble metal nanoparticles by ultrasound process

Ecodesigns for nano-sized noble metal particles were investigated by a new liquid-solid (metal oxide-alcohol) system. We have reduced noble metal oxides as low-emission starting materials by ultrasound and tried to fabricate various noble metal nanoparticles (Ag, Au, Pt, Pd) at room temperature, Noble metal oxides were investigated during decomposition. These reductions are ecologically clean, because many noble metal oxides are not toxic, and during decomposition, O/sub 2/ is evolved. By choosing suitable conditions, it is reasonable to expect that this simple sonochemical process can be extended to obtain nano-sized metal particles.     

Pulsed Electric Current Sintering of Silicon Nitride

Pulsed electric current sintering (PECS) has been used to densify α-Si₃N₄ powder doped with oxide additives of Y₂O₃ and Al₂O₃. A full density (>99%) was achieved with virtually no transformation to β-phase, resulting in a microstructure with fine equiaxed grains. With further holding at the sintering temperature, the α-to-β phase transformation took place, concurrent with an exaggerated grain growth of a limited number of elongated β-grains in a fine-grained matrix, leading to a distinct bimodal grain size distribution. The average grain size was found to obey a cubic growth law, indicating that the growth is diffusion-controlled. In contrast, the densification by hot pressing was accompanied by a significant degree of the phase transformation, and the subsequent grain growth gave a broad normal size distribution. The apparent activation energy for the phase transformation was as high as 1000 kJ/mol for PECS, almost twice the value for hot pressing (∼500 kJ/mol), thereby causing the retention of α-phase during the densification by PECS.     

温度对浸镀锡镀层的影响

在基于氯化胆碱-水溶液(ChCl-H2O)的浸镀锡溶液中,以铜片为基材,在不同温度下进行浸镀锡研究.分别利用X-荧光光谱仪、扫描电子显微镜、X-射线衍射仪、可焊性测试仪和电化学工作站,考察了浸镀锡速率、形貌、物相和性能受温度的影响程度.结果表明,随着温度的升高,浸镀锡的沉积速率不断加快,浸镀锡镀层的耐蚀性和可焊性均有提高;镀层表面在较低温度时光亮平整,但随温度上升,变得越来越粗糙;在70℃时,锡镀层的晶相组成由Sn和Cu6 Sn5两相共存转变Sn、Cu6Sms和Cu3 Sn三相共存.在ChCl-H2O体系中,铜基浸镀锡的反应活化能Ea为24.6 kJ·mol-1.     

Degradation by Sn diffusion applied to surface mounting with Ag-epoxy conductive adhesive with joining pressure

Shear and tensile tests were carried out on joints made with an isotropic conductive adhesive (ICA) consisting of Ag and epoxy: Sn–Pb plated components mounted on printed boards and tensile bars consisting of Sn plated Ni and Cu joined under various joining pressures. After 150 °C–100 h, shear strength degraded to 72% and Sn in the plating diffused slightly to the Ag fillers in the ICA for the component mounting. High joining pressure increased the initial tensile strength and volume percentage of Ag fillers in the ICA. After 150 °C–100 h, tensile strengths for all joining pressures degraded on average to 36% of the initial strengths. In the case of low joining pressures, an Ag–Sn intermetallic was formed at only the Ag–Sn contact points of the Sn/ICA interface; leading to reproducibility of the component mounting. The difference of degradation ratios between the mounted components and tensile bars could be explained by the offset of the Sn–Pb area at the component/ICA interface.     

A flexible videoconference system based on multiagent framework

We present a design and implementation of a flexible videoconference system (VCS) using multiagent computing technology. The proposed system, we named FVCS, aims to reduce the burden of the users under the operational environment with insufficient computational resources, such as the Internet environment with small-scale computers at homes and offices, by embedding flexibility to the conventional videoconference system. In this paper, we design and implement FVCS with knowledge-based multiagent framework to realize adaptability of FVCS. We also evaluate the adaptability of the prototype systems of FVCS based on an operational situation observed in its experiments. From the result of the experiments, we conclude that the multiagent-based design and implementation is reasonable for construction of FVCS.     

An agent architecture for strategy-centric adaptive QoS control in flexible videoconference system

In this paper, we propose an agent architecture to improve flexibility of a videoconference system with strategy-centric adaptive QoS (Quality of Service) control mechanism. The proposed architecture realizes more flexibility by changing their QoS control strategies dynamically. To switch the strategies, system considers the properties of problems occurred on QoS and status of problem solving process. This architecture is introduced as a part of knowledge base of agent that deals with cooperation between software module of videoconference systems. We have implemented the mechanism, and our prototype system shows its capability of flexible problem solving against the QoS degradation, along with other possible problems within the given time limitation. Thus we confirmed that the proposed architecture can improve its flexibility of a videoconference system compared to traditional systems. Takuo Suganuma, Dr.Eng.: He is a research associate of Research Institute of Electrical Communication of Tohoku University. He received a Dr.Eng. degree from Chiba Institute of Technology in 1997. His research interests include agent-based computing and design methodology for distributed systems. He is a member of IPSJ, IEICE and IEEE. SungDoke Lee: He is a Ph.D. Student in the Graduate School of Information Sciences in Tohoku University. He received his MEng degree at Chonbuk National University, Korea in 1991. His research interests include Flexible Network and Knowledge of Agent. Tetsuo Kinoshita, Dr.Eng.: He is an associate professor of Research Institute of Electrical Communication of Tohoku University. He received a Dr.Eng. degree in information engineering from Tohoku University, Japan. His research interests include knowledge engineering, cooperative distributed processing and agent-based computing. He received the the IPSJ Best Paper Award in 1997, etc. He is a member of IPSJ, IEICE, JSAI, AAAI, ACM and IEEE. Norio Shiratori, Dr.Eng.: After receiving his Dr.Eng degree at Tohoku University, he joined the Research Institute of Electrical Communication of Tohoku University in 1977, and is now a professor at the same University. He has been engaged in research on distributed processing system, and flexible intelligent network. He received the 25th Anniversary of IPSJ Memorial Prize-Winning Paper Award in 1985, the 6th Telecommunications Advancement Foundation Incorporation Award in 1991, the Best Paper Award of ICOIN-9 in 1994, the IPSJ Best Paper Award in 1997, etc. He has been named a Fellow of the IEEE for his contributions to the field of computer communication networks.     

Acidic property of BEA zeolite synthesized by seed-directed method

The acidic property of a BEA zeolite prepared by a seed-directed synthesis (SDS) method without organic structure directing agent (OSDA) was analyzed by a method of ammonia infrared/mass spectroscopic temperature-programmed desorption. The number of Brønsted acid sites on the SDS-BEA zeolite was larger than that on a conventional BEA zeolite synthesized from using OSDA. The enthalpy of ammonia desorption, distributed mainly in a range between 115 and 145 kJ mol^?1, was in agreement with the acid strength region generated by isomorphous substitution of Si⁴⁺ by Al³⁺ in the BEA framework. These observations confirm that the microstructure around the incorporated Al in the SDS-BEA zeolite was equivalent to that in the conventional one.