A method of estimating the standard gibbs free energy of formation

Standard Gibbs free energy of formation (ΔG_f⁰), an important property needed in design calculations has been estimated using molar refraction, R_M. The linear relationships derived between ΔG_f⁰ and R_M tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy.     

Evaporated Thin Films of CdS and CdTe: Optimization for Photovoltaic Applications

Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper     

PMSS: A programmable memory system and scheduler for complex memory patterns

HPC industry demands more computing units on FPGAs, to enhance the performance by using task/data parallelism. FPGAs can provide its ultimate performance on certain kernels by customizing the hardware for the applications. However, applications are getting more complex, with multiple kernels and complex data arrangements, generating overhead while scheduling/managing system resources. Due to this reason all classes of multi threaded machines–minicomputer to supercomputer–require to have efficient hardware scheduler and memory manager that improves the effective bandwidth and latency of the DRAM main memory. This architecture could be a very competitive choice for supercomputing systems that meets the demand of parallelism for HPC benchmarks. In this article, we proposed a Programmable Memory System and Scheduler (PMSS), which provides high speed complex data access pattern to the multi threaded architecture. This proposed PMSS system is implemented and tested on a Xilinx ML505 evaluation FPGA board. The performance of the system is compared with a microprocessor based system that has been integrated with the Xilkernel operating system. Results show that the modified PMSS based multi-accelerator system consumes 50% less hardware resources, 32% less on-chip power and achieves approximately a 19x speedup compared to the MicroBlaze based system.     

Multi‐agent collaboration based on enhanced cognitive awareness: an architecture for agents' profiling on the semantic web

This paper applies cognitive models, inspired by cognitive science, with the aim to propose architectural and knowledge‐based requirements to structure ontological models for the cognitive profiling of agents. The proposed architecture aims to address the lack of flexibility that most agent‐based collaborations are affected by. The resulting agents, equipped with advanced cognitive profiling, have an increased cognitive awareness of themselves and are more capable of interacting with other agents in a multi‐agents based environment. In this research, cognitive awareness identifies the ability of the web agents to diagnose their processing limitations and to establish interactions with the external environment. The outcome is the enhanced flexibility, reusability and predictability of the agent behaviour; thus contributing towards minimizing human cognitive demands. The concept of cognitive profiling presented in this paper considers the semantic web as an action mediating space, where ontological models provide affordances for improving cognitive awareness through shared knowledge‐base. The conceptual model for the cognitive profile architecture is developed with Protégé Ontology editor to generate OWL Ontology and evaluated through a proof of concept. The results show that agents equipped with cognitive awareness can undertake complex tasks more dynamically.     

The effect of hydrogen in the mechanism of aluminum-induced crystallization of sputtered amorphous silicon using scanning Auger microanalysis

The metal-induced crystallization (MIC) of hydrogenated sputtered amorphous silicon (a-Si:H) using aluminum has been investigated using X-ray diffraction (XRD) and scanning Auger microanalysis (SAM). Hydrogenated, as well as non-hydrogenated, amorphous silicon (a-Si) films were sputtered on glass substrates, then capped with a thin layer of Al. Following the depositions, the samples were annealed in the temperature range 200 °C to 400 °C for varying periods of time. Crystallization of the samples was confirmed by XRD. Non-hydrogenated films started to crystallize at 350 °C. On the other hand, crystallization of the samples with the highest hydrogen (H₂) content initiated at 225 °C. Thus, the crystallization temperature is affected by the H₂ content of the a-Si. Material structure following annealing was confirmed by SAM. In this paper, a comprehensive model for MIC of a-Si is developed based on these experimental results.     

Ear recognition with feed-forward artificial neural networks

Biometrics has become one of the most important techniques in recognizing a person’s identity. A person’s face, iris and fingerprint are mostly used in biometrics today. It has been established that there are no two ears exactly alike, even in the cases of identical twins. In this paper, we define a 7-element ear feature set and design and train a feed-forward artificial neural network to recognize a human ear. We train and test the network with 51 ear pictures from 51 different persons. Simulation experiments with various networks with various number of layers and number of neurons per layer and with and without noise are conducted. Results indicate that a 95 % ear recognition accuracy is achieved with a simple 3-layer feed-forward neural network with only a total of 18 neurons even in the presence of some noise. This design outstands previous work in simplicity and implementation cost.     

Low temperature synthesis of <Emphasis Type="Italic">Manganese tungstate</Emphasis> nanoflowers with antibacterial potential: Future material for water purification

Pure water is the fundamental requisite for human life. The water has been recycled naturally but not in an adequate amount for consumption. Nanotechnology with extraordinary applications provides competent ways for the decontamination of contaminated water. In the present study MnWO₄ nanoflowers endorsed with inherent antibacterial activity were successfully synthesized by facile hydrothermal approach. XRD, SEM, EDX spectroscopy and UVDRS were used to characterize the as-synthesized nanoflowers. Gram negative Escherichia coli ATCC 52922 bacterium was used as model organism to test antibacterial activity of as-synthesized MnWO₄ nanoflowers. This study was conducted to optimize minimum concentration of MnWO₄ nanoflowers and maximum contact time required to achieve complete inactivation of bacteria present in contaminated water. Minimum inhibitory concentration (MIC) of MnWO₄ nanoflowers was found to be 10 μg/ml. The assessment and interpretation of bacterial viability was done using dual fluorescent staining. The synthesized 3D-nanoflowers were found as potent bactericides. Thus, MnWO₄ nanoflowers emerged to be very good future material for disinfection of biological pollutants present in the contaminated water reservoirs and as an anti-biofouling agent.     

Rheology of natural fibers thermoplastic compounds: Flow length and fiber distribution

The presented study investigates the flow length and the corresponding fiber content distribution in the injection‐moulded natural fiber reinforced thermoplastics and its relation to fiber type and processing parameters such as injection pressure, temperature, injection rate and mould tempering by increasing die temperature. In this research, polypropylene compounds with nominally 30 wt % hemp and sisal fibers are investigated. The influence of the injection pressure (500 and 1000 bar), melt temperature (180°C, 200°C, and 220°C), and die temperature (23°C and 80°C) on the fiber content distribution all over the sample is investigated. An increasing linear trend of fiber content along the spiral length is observed as an evidence of a fiber/polymer multiflow system. A pattern for fiber content distribution with respect to the fiber length along the injected spiral can be distinguished, where the longer fibers are usually found at the end of the injected part and the shorter fibers remain near mould entrance point. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39861.