A 322 MHz random-cycle embedded DRAM with high-accuracy sensing and tuning

A 16 Mb embedded DRAM macro in a fully CMOS logic compatible 90 nm process with a low noise core architecture and a high-accuracy post-fabrication tuning scheme has been developed. Based on the proposed techniques, 61% improvement of the sensing accuracy is realized. Even with the smallest 5 fF/cell capacitance, a 322 MHz random-cycle access while 32 ms data retention time which contributes to save the data retention power down to 60 /spl mu/W are achieved.     

Hydrolysis of human horny cells by alkaline protease: Morphological observation of the process

The interaction of highly purified alkaline protease fromBacillus sp. KSM-K16 with the horny cells of human skin contained in skin grime was directly visualized by electron microscopy. It became clear that the protease first penetrates the horny cells and then adsorbs, mainly onto the internal structure of the cells at the initial stage of hydrolysis, and directly hydrolyzes the keratin filaments, though the marginal band surrounding them retains its original shape. Then, hydrolysate produced from the keratin filaments flows out of the cell, and early in the hydrolysis process keratin filaments decrease and then disappear, leaving a marginal band, i.e., the cell turns to a hollow state. As a result, the remaining marginal band loses support from inside the cell, thus promoting cleavage and dispersion. Until this stage in the protease reaction, the remarkable liberation of hydrolysis products as water-soluble protein does not occur.     

Effect of Computational Constraints on Zero-Dimensional Computations for the Nanosecond-Order Ignition Process of the CH4/Air Mixture

Combustion, Explosion, and Shock Waves - Zero-dimensional computations of nanosecond-order ignition using a nanosecond discharge are performed with two constraints. The effects of these constraints...     

Automatic extraction of citation information in Japanese patent applications

The need for academic researchers to retrieve patents and research papers is increasing, because applying for patents is now considered an important research activity. However, retrieving patents using keywords is a laborious task for researchers, because the terms used in patents for the purpose of enlarging the scope of the claims are generally more abstract than those used in research papers. Therefore, we have constructed a framework that facilitates patent retrieval for researchers, and have integrated research papers and patents by analysing the citation relationships between them. We obtained cited research papers in patents using two steps: (1) detection of sentences containing bibliographic information, and (2) extraction of bibliographic information from those sentences. To investigate the effectiveness of our method, we conducted two experiments. In the experiment involving Step 1, we prepared 42,073 sentences, among which a human subject manually identified 1,476 sentences containing citations of papers. For Step 2, we prepared 3,000 sentences, in which the titles, authors, and other bibliographic information were manually identified. We obtained a precision of 91.6%, and a recall of 86.9% in Step 1, and a precision of 86.2% and a recall of 85.1% in Step 2. Finally, we constructed an information retrieval system that provided two methods of retrieving research papers and patents. One method was retrieval by query, and another was from the citation relationships between research papers and patents.     

Microstructural analysis of the stir zone of Al alloy produced by friction stir spot welding

The present study applied friction spot joining (FSJ), which was recently developed as a lap joining technique of Al alloys, to two sheets of Al alloy 6061, 1 mm in thickness, and then examined the microstructural feature in the weld. The weld had the nugget-shaped stir zone around the exit hole of the probe, and the stir zone exhibited the equiaxed grain structure having finer grain size than that of the base material. The crystallographic texture analysis using electron backscattered diffraction method suggested that the material movement occurred along the rotating direction of the welding tool in the wide region including the stir zone. In the periphery of the nugget-shaped stir zone, which was characterized as the region having the finer grain size than that of the stir zone interior, any inclusions and precipitates were not found in the SEM scale. The weld was softened around the weld centre. The softening could be explained by dissolution and/or growth of the strengthening precipitates due to thermal cycle of FSJ.     

Characteristics of Microscale Combustion in a Narrow Heated Channel

The characteristics of microscale combustion were investigated by using a microchannel heated by an external source. The inner diameter of the channel was 2 mm, which was slightly smaller than the quenching distance of the stoichiometric methane–air mixture under normal conditions. The effects of the equivalence ratio and the averaged flow velocity on the characteristics of combustion in the microchannel were examined. At a channelwall temperature of 1000°C, flames could be stabilized at equivalence ratios of 0.05–1.9 and mixture velocities up to 150 cm/sec in a Ushaped quartzglass channel. At moderate equivalence ratios and lower velocity conditions within the flammability region, oscillatory combustion was observed. A simple analytical model predicting flame oscillations on the basis of the linear analysis of steady solutions is proposed.     

Polarization-Insensitive Monolithic 40-Gbps SOA–MZI Wavelength Converter With Narrow Active Waveguides

A polarization-insensitive monolithic 40-Gbps semiconductor optical amplifier (SOA)-Mach-Zehnder interferometer wavelength converter has been developed. Based on the photon-electron rate equation, we optimized the dimensions of the waveguide structure to maximize the field confinement in the active layer. An InGaAsP active layer with narrow SOA waveguide effectively enables polarization-insensitive high-speed wavelength conversion. High-precision wafer processing technique enabled the fabrication of submicrometer-wide active waveguides with low current leakage. Input waveguide arrays were fabricated at intervals of 25 mum and mounted in a module with two-lens aspherical lens optics. The 40-Gbps nonreturn-to-zero wavelength conversion experiment demonstrates a clear eye opening over full C-band operation     

Formation of the myosin.ADP.gallium fluoride complex and its solution structure by small-angle synchrotron X-ray scattering

The products of the SOS-regulated umuDC operon are required for most UV and chemical mutagenesis in Escherichia coli, a process that results from a translesion synthesis mechanism. The UmuD protein is activated for its role in mutagenesis by a RecA-facilitated autodigestion that removes the N-terminal 24 amino acids. A previous genetic screen for nonmutable umuD mutants had resulted in the isolation of a set of missense mutants that produced UmuD proteins that were deficient in RecA-mediated cleavage (J. R. Battista, T. Ohta, T. Nohmi, W. Sun, and G. C. Walker, Proc. Natl. Acad. Sci. USA 87:7190-7194, 1990). To identify elements of the UmuD' protein necessary for its role in translesion synthesis, we began with umuD', a modified form of the umuD gene that directly encodes the UmuD' protein, and obtained missense umuD' mutants deficient in UV and methyl methanesulfonate mutagenesis. The D39G, L40R, and T51I mutations affect residues located at the UmuD'2 homodimer interface and interfere with homodimer formation in vivo. The D75A mutation affects a highly conserved residue located at one end of the central strand in a three-stranded beta-sheet and appears to interfere with UmuD'2 homodimer formation indirectly by affecting the structure of the UmuD' monomer. When expressed from a multicopy plasmid, the L40R umuD' mutant gene exhibited a dominant negative effect on a chromosomal umuD+ gene with respect to UV mutagenesis, suggesting that the mutation has an effect on UmuD' function that goes beyond its impairment of homodimer formation. The G129D mutation affects a highly conserved residue that lies at the end of the long C-terminal beta-strand and results in a mutant UmuD' protein that exhibits a strongly dominant negative effect on UV mutagenesis in a umuD+ strain. The A30V and E35K mutations alter residues in the N-terminal arms of the UmuD'2 homodimer, which are mobile in solution.     

Synthesis of fixed-structure robust controllers using a constrained particle swarm optimizer with cyclic neighborhood topology

The purpose of this paper is to develop design scheme based on an easy-to-use meta-heuristic approach with superior reliability and validity for fixed-structure robust controllers, satisfying both multiple control specifications and system stability conditions. For this purpose, a particle swarm optimizer is first developed, which reduces the probability of premature convergence to local optima in the PSO (particle swarm optimization) by exploiting the particle’s local social learning based on the idea of cyclic-network topology. Next, it is shown how to obtain a fixed-structure robust controller with constraints on multiple H_∞ specifications and system stability based on the developed PSO technique incorporated with a simple constraint handling method. Finally, typical numerical examples are studied to show the applicability of the proposed methodology to the synthesis of fixed-structure robust controllers. These examples clearly verify that the developed design scheme gives a novel and powerful impetus with remarkable reliability to fixed-structure robust controller syntheses.     

Development of a new seminested PCR method for detection of Legionella species and its application to surveillance of legionellae in hospital cooling tower water

The presence of PCR inhibitors in water samples is well known and contributes to the fact that a practical PCR assay has not been developed for legionella surveillance. In this study, we devised a new seminested PCR assay for detection of Legionella spp. in water samples as a means of overriding the PCR inhibitors without loss of sensitivity. The seminested PCR assay utilized primers to amplify the 16S rRNA gene (LEG primers) of 39 Legionella spp. The assay was specific to legionellae, and the sensitivity was 1 fg of extracted Legionella DNA in laboratory examination. To evaluate the feasibility and sensitivity of the PCR assay in identifying the presence of legionellae, it was used to survey Legionella contamination in the water of 49 cooling towers of 32 hospitals. A commercially available EnviroAmp Legionella kit and a culture method were also used in the survey for comparison with the seminested PCR assay. The detection rates of legionellae in the samples were 91.8% (45 of 49) by the PCR assay and 79.5% (39 of 49) by the culture method. The EnviroAmp kit revealed that 30.6% of the water samples (15 of 49) contained inhibitors of the PCR amplification. However, the seminested PCR assay could produce the Legionella-specific DNA bands in 14 of the 15 samples. Although 8 of the 14 samples were positive in the first-step PCR, 6 of the 14 samples became positive in the second-step PCR. These results suggest that the effect of PCR inhibitors in samples, if any, can be reduced because of the dilution of the sample in the second-step PCR and that sensitivity of detection can be increased by the second-step PCR. Thus, the seminested PCR assay with LEG primers to amplify the 16S rRNA gene of 39 Legionella spp. was a practical and sensitive method to detect Legionella spp. in water samples.